OLEVS 3655 Moon Phase Classic Three Eye Dial Men's Watch

Introduction

Thank you for choosing the OLEVS 3655 Moon Phase Classic Three Eye Dial Men's Watch. This manual provides essential information for setting up, operating, and maintaining your watch to ensure its longevity and optimal performance. This timepiece combines classic design with modern functionality, featuring a moon phase display, chronograph, and a durable stainless steel construction.

The OLEVS 3655 watch, showcasing its elegant design.

Setup Instructions

Before using your watch, please follow these steps to set the time, date, and other functions.

Side view diagram illustrating the watch's crown and pushers for various adjustments.

1. Setting the Time:
   • Pull out the crown (adjusting handle) to the outermost position.
   • Rotate the crown to move the hour and minute hands to the desired time.
   • Push the crown back in to secure the time setting.
2. Setting the Date:
   • Pull out the crown to the middle position.
   • Rotate the crown to adjust the date in the calendar small window (4-5 o'clock position).
   • Push the crown back in to secure the date setting.
3. Setting the Moon Phase and 24-Hour Dial (Second Time Zone):
   • Pull out the adjusting handle (crown) to the outermost position.
   • Press and hold down the ① key button (top pusher) until the subdial pointer rotates to the corresponding time.
   • Press back the adjusting handle (crown).
   • The two places time display (moon phase and 24-hour dial) is now completed.
   • Example: If it is 11:10 Beijing time and 12:10 Tokyo time, you can display the time of these two regions at the same time by adjusting the 9 o'clock position subdial.
4. Operating the Chronograph:
   • Start/Pause: Press the top pusher (① key button) to start or pause the chronograph.
   • Reset: Press the bottom pusher (② key button) to reset the chronograph to zero. This can only be done when the chronograph is paused.

Operating the Watch Functions

Your OLEVS 3655 watch features several functions:

• 60-Minute Counter: Located at the 9 o'clock position, this subdial tracks minutes during chronograph operation.
• 24-Hour Moon Phase: Located at the 12 o'clock position, this subdial displays the moon phase and also functions as a 24-hour indicator for a second time zone.
• Second Time Zone Dial: Located at the 3 o'clock position, this dial shows the second time zone.
• 60-Second Counter: Located at the 6 o'clock position, this subdial tracks seconds during chronograph operation.
• Calendar Small Window: Displays the current date between the 4 and 5 o'clock positions.
• Luminous Function: The hands and hour markers are coated with luminescent material, allowing you to read the time in low-light conditions after exposure to light.

The watch's luminescent hands and markers for visibility in the dark.

Care and Maintenance

• Water Resistance: The watch is rated for 30 meters (3ATM) water resistance. This means it is suitable for daily use, such as hand washing, splashes, and rain. It is not suitable for swimming, diving, or exposure to hot water (e.g., showers, saunas), as hot water can compromise the seals.
• Cleaning: To maintain the appearance of your watch, wipe it regularly with a soft, dry cloth. For the stainless steel band, a slightly damp cloth can be used, followed by drying.
• Avoid Chemicals: Do not expose the watch to harsh chemicals, solvents, or detergents, as these can damage the case, band, or seals.
• Temperature Extremes: Avoid exposing the watch to extreme temperatures, both hot and cold, as this can affect the battery life and movement accuracy.
• Impact: While the watch is shock-resistant, avoid strong impacts or dropping it, which could damage the internal mechanism or the Hardlex dial window.

The watch demonstrating its 30m water resistance.

Troubleshooting

• Watch Not Running: Ensure the crown is fully pushed in. If the watch still does not run, the battery may need replacement. This watch includes a battery.
• Incorrect Time/Date: Refer to the "Setup Instructions" section to correctly set the time and date.
• Loose Hands: If any of the watch hands appear loose or detached, this indicates a manufacturing defect or damage from impact. In such cases, please contact customer support for assistance. Do not attempt to fix it yourself.
• Water Inside the Watch: If you notice condensation or water inside the watch, immediately stop using it and seek professional repair. This could indicate a compromised seal.

Specifications

Note: All sizes are manually measured, there may be a reasonable error. Please prevail in kind.

User Tips

• Water Resistance Caution: While the watch is 30m waterproof, it's important to remember that this rating is for splashes and brief immersion. Avoid wearing it during hot showers, baths, or swimming, as steam and prolonged water exposure can damage the internal components.
• Luminous Feature: For optimal glow in the dark, ensure your watch is exposed to sufficient light (natural or artificial) before entering a dark environment.
• Mirror Durability: The Hardlex coated mirror is designed to be scratch-resistant, offering good protection against everyday wear.

Warranty and Support

Your OLEVS 3655 watch is designed for durability and precision. For any issues not covered in the troubleshooting section, or for warranty claims, please contact the seller or authorized service center. Keep your purchase receipt as proof of purchase.

For further assistance, please refer to the official OLEVS website or contact their customer support.

Product Video Showcase

A short video showcasing the OLEVS 3655 watch's features and design.