tebe LE511

Contents

Tebe LE511 Bluetooth 5.3 Audio Transmitter User Manual

Model: LE511 | Brand: tebe

1. Introduction

This manual provides detailed instructions for the Tebe LE511 Bluetooth 5.3 Audio Transmitter. This device is designed to wirelessly transmit audio from various sources like TVs, PCs, and MP3 players to Bluetooth-enabled headphones or speakers. It supports advanced audio codecs including aptX-LL/HD/AD and LC3, and features Auracast Broadcast Audio for multi-device connections.

2. Product Overview

2.1 Device Layout

Tebe LE511 Bluetooth Audio Transmitter with labeled parts: Status Indicator Light, Working Mode Light, Operation Buttons, Power/Mode Switch, Audio Input and Charging Port.
Figure 1: Tebe LE511 Bluetooth Audio Transmitter - Product Overview

2.2 LED Indicator Light Definitions

Table 1: LED Indicator Light Definitions
IndicatorStatus
Working Mode Light
"BA" light onDevice is in Broadcast mode
"LE" light onDevice is in LE Audio mode
"BT" light onDevice is in standard Bluetooth mode
"BT" light flashes once per secondDevice is in reconnection mode
"BT" light flashes three times per secondDevice is searching for and pairing with Bluetooth devices
"BT" light constantly onDevice is connected to a Bluetooth device
Status Indicator Light
"USB, AUX, OPT, COAX" light onDevice is working with the corresponding audio input channel
CODE RGB light onColor corresponds to: SBC (dark blue), aptX (light blue), aptX HD (green), Aptx adaptive high quality (yellow), Aptx adaptive low latency (purple)
Lossless, LE-LL, LE-HQ lights onDevice is working with the corresponding LE Audio format
Charging lightConstantly on while charging, automatically turns off when fully charged; Flashes to indicate low battery.

3. Setup

3.1 Charging the Device

The product is equipped with a rechargeable 1000mAh battery. A flashing red light indicates low battery and the need for charging. It is recommended to fully charge the device before first use.

  1. Insert one end of the USB charging cable into the charging port (DC 5V) of the product.
  2. Insert the other end into a standard USB 5V power output (e.g., mobile phone charger or computer USB port).
  3. Charging time is approximately 2.5 hours. The red light will be constantly on during charging and will turn off when charging is complete.

3.2 Power On/Mode Switch

The power/mode switch allows you to turn the device on and select its operating mode. The interval between switching should not be less than 3 seconds.

  • To power on and enter standard Bluetooth (BT) and LE Audio modes: Toggle the switch to the BT position.
  • To power on and enter Broadcast (BA) mode: Toggle the switch to the BA position.

3.3 Connecting Audio Input

The device supports Optical, Coaxial, and AUX audio inputs.

  1. For Optical Input: Insert an optical cable into the OPTICAL port on the device. Insert the other end of the optical cable into the audio output port of your home TV or other audio source. Switch the audio channel on the device until the "OPT" light illuminates.
  2. For AUX Input: Insert a 3.5MM audio cable into the AUX port on the device. Insert the other end of the audio cable into the audio output port of the TV or other audio source. Switch the audio channel on the device until the "AUX" light illuminates.
  3. For Coaxial Input: Insert a coaxial cable into the COAXIAL port on the device. Insert the other end into your audio source. Switch the audio channel on the device until the "COAX" light illuminates.
  4. For USB Input: Connect a USB cable to the USB port on the device and your audio source. Switch the audio channel on the device until the "USB" light illuminates.
Diagram showing the multi-interface adapter with Optical, Coaxial, Aux, DC 5V, and RCA ports labeled.
Figure 2: Multi-interface adapter with various audio input and charging ports.

4. Operating Instructions

4.1 Standard Bluetooth (BT) Mode

In BT mode, the device can transmit sound from your TV, PC, MP3 player, or other audio sources to a single Bluetooth headphone or speaker.

  1. Turn on your Bluetooth speaker or headphone and set it to pairing mode.
  2. Toggle the device's power/mode switch to the BT position.
  3. Ensure the audio input is correctly connected and selected (refer to Section 3.3).
  4. Double-click the pairing button on the device to enter search and pairing mode. The "BT" light will flash rapidly (three times per second).
  5. After successful connection, the corresponding audio encoding light on the device will illuminate, and sound will be emitted from the Bluetooth speaker or headphone.
Diagram showing a computer and TV connected to the LE Audio Transmitter, which then connects wirelessly to a Bluetooth speaker and Bluetooth headphones.
Figure 3: BT Mode connection example.

4.2 Broadcast (BA) Mode (Auracast)

In BA mode, the device supports connecting multiple Auracast-enabled headphones or speakers simultaneously, featuring one-to-many and low-latency characteristics.

  1. Turn on your Auracast-enabled Bluetooth device (e.g., headphones or speaker) and set it to Broadcast mode.
  2. Toggle the device's power/mode switch to the BA position.
  3. Ensure the audio input is correctly connected and selected (refer to Section 3.3).
  4. The device will automatically pair and connect to nearby Auracast-enabled devices.
  5. After successful connection, sound will be emitted from the connected headphones or speakers.
Diagram showing a tablet, mobile phone, and notebook wirelessly connecting to the LE Audio Transmitter, which then broadcasts to an Auracast speaker, headphones, and TWS earphones.
Figure 4: BA Mode connection example (Auracast).
Diagram illustrating the Broadcast Audio Function where a TV is connected to the LE Audio Transmitter, which then broadcasts audio to multiple wireless devices like speakers and headphones.
Figure 5: Broadcast Audio Function for multiple receiver transmission.

4.3 Additional Operations

  • Device Reconnection: If the device has a connection history, it will automatically enter reconnection mode after power-on.
  • Enter Pairing Mode: In BT mode, after power-on, double-click the pairing button to enter search and pairing mode.
  • Clear Paired Devices: While the device is powered on, press and hold the pairing button for 8 seconds until all LED lights illuminate simultaneously, indicating successful clearing of paired devices.
  • Audio Input Selection: Single-click the audio input switch button on the device to toggle between USB/AUX/OPT/COAX audio input sources.
  • Audio Encoding Format Switch: While connected in BT mode, double-click the button to cyclically switch the audio encoding format for transmission.
  • Volume Adjustment: While the device is connected and in use, single-click the "-" or "+" button to adjust the volume.
  • Auto Power-Off Function: If the device is not connected, it will automatically power off after 15 minutes. It needs to be powered on again to wake up.

4.4 Product Feature Video

Video 1: Demonstration of the Tebe LE511 Bluetooth Audio Transmitter's features and connectivity.

5. Maintenance

5.1 Battery Care

Avoid storing the device with a low battery for extended periods, as this may cause the battery to automatically protect itself and fail to supply power.

6. Troubleshooting

6.1 Adapter Not Working Properly?

  • No Power/Device Not Turning On: Check if the device battery is low. Connect the charging cable and try turning on the device again. The indicator light should illuminate when the device is powered on.
  • Bluetooth Device Not Found: If your Bluetooth headphones or speaker cannot be found, ensure the device is in search and pairing mode. The "BT" light flashing rapidly (three times per second) indicates search and pairing mode. Refer to the operating steps for connecting Bluetooth devices.
  • Uncertain Operating Mode/Status: The working mode and status of the device can be determined based on the LED indicator lights on the device (refer to Section 2.2).
  • No Sound After Connection: Check if the audio input interface used on the device corresponds to the device's audio channel. This can be determined based on the LED indicator lights on the device.
  • Intermittent or Lagging Sound: If intermittent or lagging sound occurs during use, try restarting the transmitter device or your Bluetooth headphones/speaker.
  • Interference: Do not place the device on metal objects. When placing the device in front of the TV, ensure there are no obstructions that could interfere with the signal.

7. Product Specifications

Table 2: Technical Specifications
FeatureSpecification
Model NumberLE511
Bluetooth VersionV5.3
Wireless TypeBluetooth
Transmission Distance>80M (unobstructed straight line)
Audio Codecs SupportedSBC, aptX, aptX-LL, aptX-HD, aptX-AD, LC3
Battery Standard1000mAh
Working Time (BT Mode)>15H
Working Time (BA Mode)>8H
Charging TimeApproximately 2.5H
Charging VoltageDC 5V
Audio Input MethodsUSB, AUX (3.5 MM), OPT (Optical), COAX (Coaxial)
Interface3.5 MM, Type-C
CertificationCE, FCC
Sound TrackDouble

8. Package Contents

The package includes the following items:

  • Audio Transmitter (x1)
  • Product Manual (x1)
  • Optical Cable (x1)
  • USB Power Cable (x1)
  • 3.5MM Audio Cable (x1)
  • Coaxial Cable (x1)

9. User Tips

  • Optimizing Connection Speed: To improve connection speed, it is recommended to first turn on your Bluetooth speaker or headphone and set it to pairing mode, then power on the Tebe LE511 device to search and pair.
  • Resolving Lag/Abnormalities: If you experience lag or other abnormalities during connection or use, try restarting both the Tebe LE511 transmitter and your Bluetooth headphones or speaker.
  • Auracast Compatibility: When using the Auracast feature, ensure that your Bluetooth headphones or speakers actually support Auracast. The device does not support Auracast for hearing aids.
  • Auracast Stream Name: The Auracast stream name cannot be changed and is typically equipped with a four-digit name extension (e.g., auracast_00af).
  • Interference During Charging: If current interference noise occurs while using the device and charging simultaneously, remove the charging cable to resolve it.
  • Placement: Avoid placing the device on metal objects. When positioning it near a TV, ensure there are no obstructions for optimal signal transmission.

10. Warranty and Support

For any issues, technical support, or warranty claims, please refer to the official product documentation or contact the seller/manufacturer directly. A detailed user manual in PDF format is available for download: Tebe LE511 User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.