QUICK QUICK 712

Contents

QUICK 712 2-in-1 Rework Soldering Station User Manual

Model: QUICK 712 | Brand: QUICK

1. Introduction

The QUICK 712 is a versatile 2-in-1 rework soldering station designed for professional and hobbyist electronics work. It integrates a powerful 861DW hot air gun and a precise 203H soldering iron, both featuring independent dual digital temperature displays for accurate control. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your QUICK 712 station.

QUICK 712 Rework Soldering Station with hot air gun and soldering iron

Figure 1: QUICK 712 2-in-1 Rework Soldering Station

2. Safety Information

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always operate the station in a well-ventilated area to avoid inhaling fumes.
  • Wear appropriate personal protective equipment (PPE), including safety glasses and heat-resistant gloves.
  • Do not touch the hot air gun nozzle or soldering iron tip when the unit is powered on or cooling down. They can reach very high temperatures.
  • Ensure the power cord is properly grounded and in good condition.
  • Keep flammable materials away from the work area.
  • Turn off the power and unplug the unit when not in use or before performing maintenance.
  • Do not use the station near water or in damp conditions.
  • Keep out of reach of children.

3. Package Contents

Verify that all items are present in your package:

  • QUICK 712 Rework Soldering Station Main Unit
  • 861DW Hot Air Gun
  • 203H Soldering Iron
  • Hot Air Gun Stand
  • Soldering Iron Stand with cleaning sponge
  • Assorted Hot Air Nozzles (typically 3-4 pieces)
  • Power Cord
  • User Manual (this document)
QUICK 712 station with both hot air gun and soldering iron connected, including their respective stands

Figure 2: QUICK 712 Station with all components

4. Product Overview

The QUICK 712 station features a main control unit with separate interfaces for the hot air gun and soldering iron. Refer to the diagram below for component identification:

Front panel of the QUICK 712 station with numbered labels for controls and displays

Figure 3: Front Panel Controls and Displays

  1. Soldering Iron Temperature Display
  2. Soldering Iron Temperature Regulation Buttons (Up/Down)
  3. Soldering Iron Function Key (Star button)
  4. Soldering Iron Interface (Connector port)
  5. Soldering Iron Power Switch
  6. Hot Air Gun Temperature Display
  7. Hot Air Gun Temperature Regulation Buttons (Up/Down)
  8. Hot Air Gun Air Volume Regulation Buttons (Up/Down)
  9. Hot Air Gun Interface (Connector port)
  10. Hot Air Gun Power Switch

5. Specifications

Detailed technical specifications for the QUICK 712 Rework Soldering Station:

Table of product parameters for soldering iron and hot air gun

Figure 4: Product Parameters

QUICK 712 Product Specifications
ParameterSoldering Iron PartHot Air Gun Part
Model NumberQUICK 712
Brand NameQUICK
CertificationCE
Power90W1000W
Temperature Range50-500°C100-500°C
Temperature Stability±2°C (no load)±2°C (no load)
Dormancy/Hibernation Time Range0-250 minutesN/A
Shutdown Time Range0-250 minutesN/A
Max Ambient Temperature40°C40°C
Grounding Resistance< 2 ΩN/A
Fan TypeN/ABrushless eddy current fan
Air VolumeN/A1-120 Level (120 L/min)
FunctionHigh frequency eddy current heating
OriginMainland China

6. Setup Instructions

Follow these steps to set up your QUICK 712 station:

  1. Unpacking: Carefully remove all components from the packaging. Inspect for any damage.
  2. Placement: Place the main unit on a stable, heat-resistant, and well-ventilated surface. Ensure adequate clearance around the unit for airflow.
  3. Connect Soldering Iron: Plug the soldering iron connector into the Soldering Iron Interface (4) on the front panel. Place the soldering iron in its stand.
  4. Connect Hot Air Gun: Plug the hot air gun connector into the Hot Air Gun Interface (9) on the front panel. Place the hot air gun in its stand.
  5. Attach Nozzles: Select the appropriate hot air nozzle for your task and securely attach it to the hot air gun.
  6. Power Connection: Connect the power cord to the back of the main unit and then plug it into a grounded electrical outlet of the correct voltage (110V or 220V, depending on your model).
Soldering iron stand and hot air gun stand

Figure 5: Soldering Iron and Hot Air Gun Stands

Assortment of hot air gun nozzles

Figure 6: Hot Air Gun Nozzles

7. Operating Instructions

7.1 General Operation

  1. Turn on the main power switch located on the back of the unit (if present) or directly on the front panel for each tool.
  2. The digital displays will light up, showing the current temperature/air volume settings.

7.2 Soldering Iron Operation

  1. Flip the Soldering Iron Power Switch (5) to the 'ON' position.
  2. Use the Soldering Iron Temperature Regulation Buttons (2) to set the desired temperature. The display (1) will show the set temperature and then the actual temperature as it heats up.
  3. Allow the iron to reach the set temperature before use.
  4. After use, place the soldering iron back into its stand. The station may enter a dormancy mode after a set period of inactivity (adjustable via function key).

7.3 Hot Air Gun Operation

  1. Flip the Hot Air Gun Power Switch (10) to the 'ON' position.
  2. Use the Hot Air Gun Temperature Regulation Buttons (7) to set the desired temperature. The display (6) will show the set temperature.
  3. Use the Hot Air Gun Air Volume Regulation Buttons (8) to adjust the airflow.
  4. When the hot air gun is placed in its stand, it will automatically cool down and enter standby mode. Removing it from the stand will resume operation at the last set parameters.

Video 1: Product demonstration showing the QUICK 712 station in use.

8. Maintenance

Regular maintenance ensures optimal performance and longevity of your soldering station.

  • Soldering Iron Tip: Clean the soldering iron tip frequently using the wet sponge or brass wool in the soldering iron stand. Re-tin the tip with solder after cleaning and before storage to prevent oxidation. Replace worn or damaged tips.
  • Hot Air Gun Nozzles: Ensure nozzles are free from debris. Clean them gently if necessary, ensuring not to damage the internal heating element.
  • Unit Cleaning: Keep the main unit clean and free of dust and solder splatter. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Air Vents: Ensure the air vents on the main unit are not obstructed to prevent overheating.
  • Storage: Store the station in a dry, dust-free environment when not in use.

9. Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

  • No Power: Check the power cord connection, the main power switch, and the individual tool power switches. Ensure the outlet is functional.
  • Soldering Iron Not Heating: Verify the iron is properly connected to the interface. Check the temperature setting. The tip might be oxidized; try cleaning and re-tinning.
  • Hot Air Gun Not Heating/No Airflow: Ensure the hot air gun is properly connected and not in its stand (which triggers cooldown). Check temperature and air volume settings.
  • Inaccurate Temperature Reading: Ensure the sensor is clean and properly seated. If issues persist, contact support.
  • Error Codes: If the display shows an error code, refer to the specific error code section in the full manufacturer's manual (if available) or contact customer support.

10. User Tips

  • Pre-heat Components: For larger components or multi-layer boards, use the hot air gun to gently pre-heat the area before applying the soldering iron. This can improve solder flow and reduce thermal stress.
  • Tip Selection: Use the correct soldering iron tip size and shape for the job. A larger tip retains heat better for larger pads, while a finer tip is suitable for small SMD components.
  • Airflow Control: When using the hot air gun, start with lower airflow settings for delicate components to prevent them from blowing away. Increase airflow as needed for larger components or faster heat transfer.
  • Practice: If new to rework, practice on scrap boards to get a feel for temperature and airflow settings before working on critical projects.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase. Do not attempt to repair the unit yourself, as this may void the warranty and pose safety risks.

© 2023 QUICK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.