MESTEK WM700A

Contents

MESTEK WM700A Inductive Wood Moisture Meter Instruction Manual

Model: WM700A

1. Introduction

The MESTEK WM700A is a powerful non-destructive induction moisture meter designed for detecting moisture content in various materials. This device is ideal for testing wood, drywall, and masonry surfaces in your home or professional environment. Featuring a full viewing angle inverted display screen and electromagnetic wave sensors, it provides clear, accurate, and easy-to-read measurements without damaging the surface.

This manual provides detailed instructions on how to set up, operate, and maintain your MESTEK WM700A moisture meter to ensure optimal performance and longevity.

2. Safety Information

  • Read all instructions carefully before using the device.
  • Keep the device away from water and extreme temperatures.
  • Do not attempt to open or modify the device; this will void the warranty.
  • Ensure batteries are inserted correctly according to polarity markings.
  • Remove batteries if the device will not be used for an extended period.

3. Package Contents

  • 1 x MESTEK WM700A Wood Moisture Meter

4. Product Overview

The MESTEK WM700A is equipped with advanced features for accurate and convenient moisture detection:

  • Four Measurement Modes: Drywall, Masonry, Softwood, and Hardwood.
  • VA Full Viewing Angle Reverse Display Screen: For clear data readability from any angle.
  • High-Precision Electromagnetic Wave Sensors: Non-destructive measurement, suitable for objects with thickness greater than 20mm and area greater than 40x40mm.
  • Temperature and Humidity Detection: Built-in sensors provide ambient temperature (℃/℉) and humidity readings.
  • Over-Range Alarm Function: Audible buzzer warning for high moisture levels.
  • Automatic Shut-down: Conserves battery life by turning off after 10 minutes of inactivity.
Front view of MESTEK WM700A moisture meter
Figure 1: Front view of the MESTEK WM700A moisture meter, showing its display and control buttons.
Close-up of electromagnetic wave sensor
Figure 2: Close-up of the high-precision electromagnetic wave sensor on the back of the MESTEK WM700A.

5. Specifications

ParameterValue
MaterialABS
Softwood Measuring Range0%~55%
Hardwood Measuring Range0%~35%
Drywall & Masonry ReadingsRelative values
Power3 * AAA battery (NOT included)
Detection Thickness≥ 20mm
Minimum Object Area40x40mm
Automatic Shut-down10 minutes
Working Current35mA
Operating Temperature0~40℃
Working Humidity0~70%
Storage Environment-10~50℃ (5%~95%RH)
Item Size132 * 73 * 33mm (5.2 * 2.9 * 1.3in)
Item Weight150g (5.3oz)
Package Size160 * 90 * 50mm (6.3 * 3.5 * 2.0in)
Package Weight200g (7.1oz)

6. Setup

Follow these steps to prepare your MESTEK WM700A for use:

  1. Install Batteries: Open the battery cover on the back of the device and insert 3 AAA batteries, ensuring correct polarity. Close the battery cover securely.
  2. Power On: Press the Power button (red/blue circle) to turn on the device. The display will light up.
  3. Select Material: Use the Up (▲) or Down (▼) arrow buttons to cycle through the available measurement modes: Drywall, Masonry, Softwood, and Hardwood. Select the mode appropriate for the material you intend to measure.
  4. Prepare for Measurement: Ensure the object to be measured has a thickness greater than 20mm and an area greater than 40x40mm for accurate readings.
Step-by-step instructions for MESTEK WM700A setup and use
Figure 3: Visual guide for battery installation, power on, material selection, and measurement.

7. Operating Instructions

7.1 Taking a Measurement

  1. After selecting the appropriate material mode, place the back of the device (where the sensor is located) flat against the surface of the object you wish to measure.
  2. Ensure full contact between the sensor and the surface.
  3. The moisture content will be displayed on the VA full viewing angle screen.
MESTEK WM700A measuring moisture in wood
Figure 4: MESTEK WM700A being used to measure moisture in a wooden surface.
MESTEK WM700A measuring moisture in a brick wall
Figure 5: MESTEK WM700A being used to measure moisture in a brick wall.

7.2 HOLD Function

Press the HOLD button to freeze the current reading on the display. Press it again to release the hold and resume live measurement.

7.3 Temperature Unit Conversion

Press the °C/°F button to switch between Celsius and Fahrenheit units for ambient temperature display.

7.4 Power Off

Press and hold the Power button to turn off the device. The device will also automatically shut down after 10 minutes of inactivity to save battery.

8. Measurement Modes

The WM700A offers four distinct measurement modes:

  • Drywall Pattern: Provides relative moisture readings for drywall.
  • Masonry Pattern: Provides relative moisture readings for masonry surfaces.
  • Softwood Pattern: Measures moisture content in softwood (0%~55%).
  • Hardwood Pattern: Measures moisture content in hardwood (0%~35%).

It is crucial to select the correct mode for the material being tested to ensure accurate results.

9. Over-Range Alarm

The device features an audible alarm to indicate excessively high moisture levels:

  • For Drywall and Masonry, the buzzer will sound if the detected value exceeds 70%.
  • For Softwood and Hardwood, the buzzer will sound if the detected value exceeds 17%.
MESTEK WM700A over-range alarm in action
Figure 6: MESTEK WM700A in use on a wall, illustrating the over-range alarm feature with a buzzer icon and text.

10. Temperature and Humidity Detection

The MESTEK WM700A includes integrated sensors to detect and display the ambient temperature and humidity. These readings are shown on the main display alongside the moisture measurement, providing a comprehensive environmental overview.

MESTEK WM700A displaying moisture, temperature, and humidity
Figure 7: MESTEK WM700A held in hand, displaying moisture, temperature, and humidity readings.

11. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement: Replace batteries when the low battery indicator appears on the display. Always use new AAA batteries.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.

12. Troubleshooting

  • Device does not power on: Check battery installation and ensure batteries are not depleted. Replace if necessary.
  • Inaccurate readings: Ensure the correct material mode is selected. Verify the object's thickness and area meet the minimum requirements (≥20mm thickness, ≥40x40mm area). Ensure the sensor is in full contact with the surface.
  • Display is dim or flickering: Replace batteries.
  • No reading: Ensure the device is properly placed on the material and the material meets the minimum size requirements for the inductive sensor.

13. User Tips

  • For best results, take multiple readings in different spots on the same surface to get an average moisture level.
  • When measuring wood, consider the type of wood (softwood vs. hardwood) and select the corresponding mode for more accurate results.
  • The non-destructive nature of this meter makes it ideal for finished surfaces where pin-type meters would cause damage.

14. Warranty and Support

This product comes with a 1-year guarantee from the date of purchase. If you encounter any issues with the product's quality, fitness for purpose, or if it does not match the description, please contact your retailer or the manufacturer's customer support for assistance.

For technical support or inquiries, please refer to the contact information provided by your seller or on the official MESTEK website.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.