AIMOS SW522

Contents

AIMOS 13-in-1 USB-C KVM Docking Station User Manual

Models: SW522 (1HDMI + 1DP), SW523 (2DP), SW521 (2HDMI)

Brand: AIMOS

1. Introduction

The AIMOS 13-in-1 USB-C KVM Docking Station is designed to enhance your workspace by allowing two computers (a laptop and a desktop) to share two monitors and multiple USB peripherals. This manual provides detailed instructions for setting up and operating your docking station, ensuring a seamless transition between your work and personal computing environments.

Important Note: The USB-C port on the SW521-SW525 series products is exclusively for laptop input and video transmission; it does not support charging functionality.

2. Safety Information

  • Always ensure the power supply is disconnected before inserting or removing any cables.
  • Carefully check all connection lines before powering on the device to ensure proper and secure connections.
  • Do not expose the device to water, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the device to strong impacts.
  • Use only the provided DC 12V power adapter.

3. Package Contents

Please verify that all items listed below are included in your package:

  • 1 x AIMOS 13-in-1 USB-C KVM Docking Station (Model SW522, SW523, or SW521)
  • 1 x USB-A 3.0 Cable (3.3FT)
  • 1 x USB-C to C Cable (3.3FT)
  • 1 x External Controller Kit
  • 1 x DC 12V Power Adapter
  • 1 x User Manual
Package List for AIMOS KVM Docking Station
Figure 3.1: Package Contents including the docking station, various cables, external controller, power adapter, and user manual.

4. Product Overview

The AIMOS 13-in-1 KVM Docking Station is a versatile device designed to streamline your dual-computer, dual-monitor setup. It features a robust aluminum metal casing and anti-friction pads for stability.

4.1. Device Layout and Ports

Front and back view of the SW522 KVM Docking Station showing all ports and controls.
Figure 4.1: Front and Rear Panel Overview of the SW522 Docking Station.

The docking station provides the following ports and features:

  • Front Panel:
    • 2 x USB 3.2 Gen2 (USB-A, 10Gbps data transfer)
    • 1 x USB-C (10Gbps data transfer, data only, no PD charging or video)
    • 1 x SD Card Slot
    • 1 x Micro SD Card Slot
    • 1 x Select Button (for switching inputs)
    • 1 x Control Port (for external controller)
  • Rear Panel:
    • 1 x DC 12V Power Input
    • 1 x ON/OFF Switch
    • 1 x PC1 IN (USB-C for laptop input)
    • 1 x PC2 IN (HDMI A, DP B, USB 3.0 for desktop input)
    • 2 x USB 3.0 (for mouse and keyboard)
    • 1 x HDMI OUT A
    • 1 x DP OUT B
Diagram showing 13-in-1 multi-functional docking station capabilities with various connected devices.
Figure 4.2: 13-in-1 Multi-functional Docking Station capabilities.

5. Setup Instructions

Follow these steps to connect your AIMOS KVM Docking Station:

5.1. Pre-Connection Checks

  • Laptop Compatibility (PC1): Ensure your laptop's USB-C port supports video output (DP Alt Mode) and is Thunderbolt 3 or higher for full functionality.
  • Desktop Compatibility (PC2): Your desktop must have available HDMI, DisplayPort, and USB-A ports for connection to the docking station.
  • Monitor Compatibility: Verify your monitors and cables support the desired resolutions (e.g., 4K@120Hz for DP, 4K@60Hz for HDMI).
PC1 and PC2 output port requirements for the KVM docking station.
Figure 5.1: PC1 (Laptop) and PC2 (Desktop) Input Requirements.
USB-C Thunderbolt Input Notes, illustrating compatible and incompatible USB-C port types.
Figure 5.2: USB-C Thunderbolt Input Notes - Required USB-C port functionality for video transmission.

5.2. Connection Steps

  1. Connect PC1 (Laptop): Connect your laptop's USB-C port (Thunderbolt 3 or higher, supporting video transmission) to the 'PC1 IN' USB-C port on the docking station using the provided USB-C to C cable.
  2. Connect PC2 (Desktop): Connect your desktop's HDMI, DisplayPort, and USB-A ports to the 'PC2 IN' ports on the docking station.
  3. Connect Monitors: Connect your monitors to the HDMI OUT A and DP OUT B ports on the rear of the docking station using appropriate HDMI and DisplayPort cables. For optimal performance, ensure total cable length for input and output does not exceed 3 meters (10 feet).
  4. Connect Peripherals: Connect your mouse and keyboard to the USB 3.0 ports on the rear panel. For other high-speed USB devices (e.g., printers, hard drives, USB flash drives), use the USB 3.2 ports on the front panel. Insert SD or Micro SD cards into their respective slots as needed.
  5. Connect Power: Plug the DC 12V power adapter into the docking station's DC 12V port and then into a power outlet.
  6. Power On: Flip the ON/OFF switch on the rear panel to power on the docking station.
Connection diagram for the KVM docking station, showing connections for laptop, desktop, monitors, and peripherals.
Figure 5.3: Comprehensive Connection Diagram.

6. Operating Instructions

6.1. Switching Between Computers

You can switch between PC1 (laptop) and PC2 (desktop) using two methods:

  • Front Panel Button: Press the 'Select' button on the front panel of the docking station.
  • External Controller: Use the provided external controller kit. This allows you to place the docking station out of sight and switch conveniently from your desktop.

An LED indicator on the front panel will show which computer source is currently active.

Diagram showing button switch and extend control options for the KVM docking station.
Figure 6.1: Switching Options (Button Switch and Extend Control).

6.2. Multiple Display Modes

The docking station supports various display modes depending on your operating system:

  • Windows: Supports both mirror mode (AAA, ABB) and extended mode (ABC, AAB). This allows you to duplicate your display or extend your desktop across multiple screens.
  • macOS: Due to system limitations, macOS only supports mirror mode (AAA, ABB). Extended display (MST) is not supported.
Comparison of multiple display modes for macOS and Windows operating systems.
Figure 6.2: Multiple Display Modes for macOS and Windows.
Diagram illustrating Copy Mode and Extended Mode for displays.
Figure 6.3: Copy Mode and Extended Mode Explained.

6.3. High-Speed Data Transfer

The docking station features USB 3.2 Gen2 ports, offering data transfer speeds of up to 10Gbps, ideal for large files, videos, photos, and music. The integrated SD and Micro SD card slots provide convenient and fast data transfer for memory cards.

USB 3.2 High-Speed Data Transfer illustration with icons for video, photo, music, and files.
Figure 6.4: USB 3.2 High-Speed Data Transfer.
Close-up view of the SD and Micro SD card slots on the docking station.
Figure 6.5: SD and Micro SD Card Slots.

7. Maintenance

  • Keep the docking station in a clean, dry, and well-ventilated area.
  • Avoid placing the device near heat sources or in direct sunlight.
  • Clean the exterior of the device with a soft, dry cloth. Do not use liquid or aerosol cleaners.
  • Ensure proper airflow around the device to prevent overheating.

8. Troubleshooting

8.1. No Display or Incorrect Resolution

  • Check Connections: Ensure all HDMI, DisplayPort, and USB-C cables are securely connected to both the docking station and your computers/monitors.
  • Laptop USB-C Port: Verify that your laptop's USB-C port supports video output (DP Alt Mode) and is Thunderbolt 3 or higher.
  • Desktop PC2 Input: For desktop connections, ensure all three cables (HDMI, DP, USB-A) are connected to the 'PC2 IN' ports.
  • Cable Quality/Length: Use high-quality cables. The total length of input and output cables should ideally not exceed 3 meters (10 feet).
  • Graphics Card DP Version: For extended display (MST) on Windows, your desktop's graphics card must support DisplayPort version 1.2 or higher.
  • Intermediate Devices: Avoid connecting any intermediate devices (e.g., adapters, extenders) between your computer and the docking station, as this can cause compatibility issues and prevent extended mode.

8.2. Peripherals Not Working (Mouse/Keyboard)

  • Ensure the mouse and keyboard are connected to the dedicated USB 3.0 ports on the rear panel.
  • Try connecting the peripherals to different USB ports on the docking station.
  • Verify that the active computer input is correctly selected on the docking station.

8.3. Data Transfer Issues

  • Ensure USB storage devices are properly connected to the USB 3.2 ports.
  • Remember that the USB-C port on the front panel is for data transfer only and does not support PD charging or video output.

8.4. Switching Not Working

  • Confirm the DC 12V power adapter is connected and the device is powered on.
  • Try using both the front panel 'Select' button and the external controller.
  • Note that hotkey switching via keyboard is not supported by this device.

8.5. EDID Emulation

The docking station features an EDID copy function, which helps maintain your desktop window arrangement when switching between computers. This means you should not need to rearrange your desktop windows after switching inputs.

Comparison of display behavior without and with EDID Emulator, showing desktop rearrangement prevention.
Figure 8.1: EDID Emulator Functionality.

9. Specifications

FeatureSpecification
BrandAIMOS
Model NumbersSW522 (1HDMI+1DP), SW523 (2DP), SW521 (2HDMI)
TypeUSB Adapter / KVM Docking Station
CertificationCE, FCC, RoHS
PC1 Input (Laptop)1 x USB-C (Thunderbolt 3 or higher, supports video transmission)
PC2 Input (Desktop)1 x HDMI, 1 x DisplayPort, 1 x USB-A
Video Output (SW522)1 x HDMI 2.0 (up to 4K@60Hz), 1 x DisplayPort 1.4 (up to 4K@120Hz)
Video Output (SW523)2 x DisplayPort 1.4 (up to 4K@120Hz)
Video Output (SW521)2 x HDMI 2.0 (up to 4K@60Hz)
USB Data Ports2 x USB 3.0 (5Gbps), 2 x USB 3.2 Gen2 (10Gbps), 1 x USB-C (10Gbps, data only)
Card Slots1 x SD Card, 1 x Micro SD Card
Power InputDC 12V Power Adapter (Please check adapter for specific voltage range, typically 100-240V universal)
Dimensions (Approx.)5.55 inches (L) x 2.95 inches (W) x 1.5 inches (H)
Weight (Approx.)0.65 kg
MaterialAluminum Metal

10. User Tips

  • Laptop USB-C: Always confirm your laptop's USB-C port supports video output (DP Alt Mode) and is Thunderbolt 3 or higher for optimal performance.
  • macOS Display: Be aware that macOS systems are limited to mirror display mode; extended display is not supported.
  • Windows Extended Display: For extended display on Windows, ensure your graphics card supports DisplayPort 1.2 or newer for MST (Multi-Stream Transport).
  • Front USB-C Port: The front USB-C port is for data transfer only. It does not support Power Delivery (PD) charging or video output.
  • Switching Method: This docking station does not support hotkey switching via keyboard commands. Use the front panel button or the external controller.
  • Desktop PC2 Setup (SW521): For the SW521 model, ensure your desktop PC has two HDMI ports for proper dual monitor setup.
  • Power Adapter: The device uses a DC 12V power adapter. While many adapters are universal (100-240V), always check the specific input voltage range printed on your adapter.

11. Warranty and Support

The manufacturer provides 12 months of technical support for this product. If you encounter any issues or have questions regarding the operation or functionality of your AIMOS KVM Docking Station, please contact the seller or manufacturer's support team for assistance. They aim to respond within 24 hours to help resolve your concerns.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.