1. Introduction
The vilnason TB-001 Presotherapy Device is a pneumatic compression system designed to provide a powerful and dynamic air pressure massage for your legs and feet. This system aids in lymphatic drainage, muscle recovery, and overall circulation improvement. It features 6 independent air bags and multiple massage modes to deliver a comprehensive and customizable massage experience.
Regular use can help promote blood circulation, eliminate edema, relieve fatigue, prevent thrombosis and varices, and improve endocrine function and immunity.

2. Product Components
Before setup, ensure all components are present:
- Control Unit (Mainframe)
- Leg Cuffs (2 units)
- Air Connecting Tubes (various lengths, Y-connector)
- Power Adapter (a.c.100-240V, 50-60Hz output d.c.12.6V/4A)

3. Setup Instructions
- Place the Control Unit: Position the control unit on a stable, flat surface near a power outlet.
- Connect Air Tubes to Cuffs: Identify the air inlets on each leg cuff. Connect the individual air tubes from the Y-connector to these inlets. Ensure a secure connection.
- Connect Air Tubes to Control Unit: Connect the main air tube from the Y-connector to the designated air outlet port on the control unit. The device has six output channels (CH1-CH6) for the air bags.
- Wear the Leg Cuffs: Wrap the leg cuffs around your legs, ensuring they are snug but comfortable. Use the powerful magic paste buckles and smooth zippers for a secure fit.
- Connect Power: Plug the power adapter into the control unit's power input port, then plug the adapter into a suitable electrical outlet. Ensure your hands are dry when handling power connections.

4. Operating Instructions
The control unit features a large screen and LED digital display for easy operation.

4.1. Power On/Off
- Press the ON/PAUSE button to turn the device on.
- Press the ON/PAUSE button again to pause the massage.
- To turn off the device, press and hold the ON/PAUSE button for a few seconds.
4.2. Setting Time
- Use the Time + and Time - buttons to adjust the massage duration.
- The time can be set from 10 to 90 minutes, with 1-minute increments.
4.3. Setting Pressure
- Use the Press + and Press - buttons to adjust the air pressure.
- The pressure range is 30 mmHg (3.99 kPa) to 260 mmHg (34.66 kPa), adjustable in 5 mmHg increments.
4.4. Selecting Massage Modes
The device offers four distinct pressure modes (A, B, C, D). Press the corresponding button (A, B, C, or D) on the control panel to select your desired mode.

| Mode | Description |
|---|---|
| Mode 1 (A) | Pressure starts from the first cavity and is continuous. Moves to the 6th cavity, then moves in a circle from the first cavity. |
| Mode 2 (B) | Pressure starts from the first cavity, and each cavity is superimposed to the 6th cavity, then unifies gas blow off, then starts from the first cavity. Cyclic addition. |
| Mode 3 (C) | Pressure starts from the first and second cavities, and each second cavity moves continuously to the 3rd and 4th cavities, the 5th and 6th cavities, and then from the first. 1, 2 cavity starts circulating movement. |
| Mode 4 (D) | After superposition into the 3rd and 4th cavities, another gas blow off will be placed in the 5th and 6th cavities. Circulation from the first and second cavity to start circulating superposition. |

4.5. Cavity Closure (Skip Care Function)
The device allows you to close or open individual air bags (cavities) at any time. This is useful for optimizing treatment to specific muscles or areas, or to avoid sensitive areas or wounds.
- The six chambers (CH1-CH6) can be switched on and off.
- Press the corresponding CH button (CH1 to CH6) to close or open that specific chamber.
- When a chamber is closed, its indicator light will be off, and it will not inflate.


4.6. Product Demonstration Video
This video demonstrates the Presotherapy Device in operation, showing the inflation and deflation of the leg cuffs.
5. Maintenance
5.1. Cleaning
- Always unplug the device from the power outlet before cleaning.
- Wipe the control unit and leg cuffs with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Ensure the cuffs are completely dry before storing.
5.2. Storage
- Store the device and its components in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid placing heavy objects on the device or cuffs.
- Keep the air tubes free from kinks or sharp bends to prevent damage.
5.3. General Care
- Handle the device and its components with care to prevent damage.
- Do not use sharp objects near the cuffs, as this may puncture the air bags.
- Regularly check air connections for any signs of wear or leaks.

6. Troubleshooting
- Device not turning on: Ensure the power adapter is securely plugged into both the device and a working electrical outlet. Check if the power outlet is functional.
- No pressure or uneven pressure:
- Verify that all air connecting tubes are securely attached to both the cuffs and the control unit.
- Check the 'Cavity Closure' settings (CH1-CH6 buttons) to ensure that desired chambers are not accidentally turned off.
- Inspect air tubes and cuffs for any visible damage or leaks.
- Abnormal noise: A working noise of ≤60dB(A) is considered normal. If you experience unusually loud or different noises, discontinue use.
- Feeling abnormal or painful during use: Immediately stop using the product. Consult a healthcare professional if discomfort persists.
- General malfunction: Do not attempt to open or repair the device yourself. This may cause fire, electric leakage, or other dangers. Contact customer support for assistance.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | vilnason |
| Model Number | TB-001 |
| Item Type | Massage & Relaxation |
| Application | Leg |
| Material | Non-woven |
| Color | Black |
| Certification | CE |
| Pressure Range | 30 mmHg (3.99 kPa) - 260 mmHg (34.66 kPa) adjustable (Step 5 mmHg) |
| Time Setting | 10 to 90 minutes (Step 1 minute) |
| Working Noise | ≤60dB(A) |
| Input Power | 29.7W |
| Power Supply | a.c.100-240V, 50-60Hz output d.c.12.6V/4A |
| Output Channels | Six |
| Pressure Modes | Four (A, B, C, D) |
| Ambient Temperature | 5℃~40℃ |
| Relative Humidity | ≤85% |
| Atmospheric Pressure | 80kPa-106kPa |
| Mainframe Net Weight | 1.35kg |
| Instrument Size (L*W*H) | 210mm*130mm*86mm |
8. User Tips
- First-time use: For your initial session, do not exceed 20 minutes. Start with approximately 5 minutes to gauge your comfort level, then gradually increase the duration as appropriate.
- Comfort is key: Always ensure the leg cuffs are snug but not uncomfortably tight. Adjust pressure settings to a level that feels beneficial without causing pain.
- Consistency: Regular use, such as 30 minutes a day, can contribute to better results in relieving aches and improving circulation.

9. Warranty and Support
For any questions regarding product operation, troubleshooting, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase records for reference.