AIMOS SW522

Contents

AIMOS USB-C HDMI DisplayPort KVM Switch Docking Station User Manual

Models: SW522 (1HDMI 1DP), SW521 (2HDMI), SW523 (2DP)

Brand: AIMOS

1. Introduction

The AIMOS KVM Switch Docking Station is a versatile device designed to enhance your workspace by allowing two computers (one laptop and one desktop) to share two monitors and multiple USB peripherals. This manual provides detailed instructions for the SW522 (1HDMI 1DP), SW521 (2HDMI), and SW523 (2DP) models, covering setup, operation, and troubleshooting to ensure a seamless user experience.

AIMOS KVM Switch Docking Station with key features
AIMOS KVM Switch Docking Station (SW522 model) highlighting 4K 120Hz, USB-C, 10Gbps USB 3.2, HDMI 2.0, and DP 1.4 features.

2. Setup Instructions

This section details the steps to connect your KVM Switch Docking Station to your computers and monitors. Ensure all devices are powered off before making connections.

2.1 Package Contents

  • KVM Switch Docking Station (SW522, SW521, or SW523 model)
  • USB-A 3.0 Cable (x1)
  • USB-C to C Cable (x1)
  • External Controller (x1)
  • DC 12V Power Adapter (x1)
  • User Manual (x1)

2.2 Connection Diagram (SW522: 1HDMI 1DP Model)

Detailed connection diagram for SW522 KVM Switch showing front and back panels with port labels and computer/monitor connections.
Front and Back Panel Diagram for SW522 KVM Switch. Note: The USB-C port on the front panel and back panel does not support PD charging. The front panel USB-C port is for data transfer only.

2.2.1 Connecting PC1 (Laptop with USB-C/Thunderbolt)

  1. Connect the provided USB-C to C cable from your laptop's Thunderbolt 3 (or higher) / USB-C port (which supports image output) to the 'PC1 IN' USB-C port on the KVM Switch.
  2. Connect your monitors to the 'OUT' HDMI A and DP B ports on the KVM Switch.
  3. Connect your mouse and keyboard to the USB 3.0 ports on the KVM Switch.
  4. Connect any additional USB devices (e.g., flash drives, hubs) to the USB 3.2 ports.
  5. Insert SD/Micro SD cards into the respective slots if needed.

2.2.2 Connecting PC2 (Desktop Computer)

  1. Connect an HDMI cable from your desktop's HDMI output to the 'PC2 IN HDMI A' port on the KVM Switch.
  2. Connect a DisplayPort cable from your desktop's DisplayPort output to the 'PC2 IN DP B' port on the KVM Switch.
  3. Connect the provided USB-A 3.0 cable from your desktop's USB port to the 'PC2 IN USB' port on the KVM Switch.
  4. Connect your monitors to the 'OUT' HDMI A and DP B ports on the KVM Switch.
  5. Connect your mouse and keyboard to the USB 3.0 ports on the KVM Switch.
  6. Connect any additional USB devices (e.g., flash drives, hubs) to the USB 3.2 ports.
  7. Insert SD/Micro SD cards into the respective slots if needed.

2.2.3 Power Connection

  1. Connect the DC 12V power adapter to the 'DC12V' port on the KVM Switch.
  2. Plug the power adapter into a wall outlet.

Important Notes for Setup:

  • Ensure your laptop's USB-C port supports video output for display functionality.
  • For desktop computers, both HDMI and DisplayPort inputs, along with the USB connection, are required for dual monitor and KVM features.
  • It is recommended that the total length of both input and output cables does not exceed 3 meters (10 feet) to ensure optimal resolution and signal integrity.
  • The USB-C port on the front panel, labeled 'Data', is for data transfer only and does not support Power Delivery (PD) charging or video transfer.
Example setup of two computers sharing two monitors via the KVM Switch.
Typical setup showing a laptop and a desktop connected to the KVM Switch, sharing two monitors.

3. Operating Instructions

3.1 Switching Between Computers

The KVM Switch offers two convenient methods for switching between connected computers:

  1. Button Switch: Press the 'Select' button on the front panel of the KVM Switch. The LED indicator will show which computer (PC1 or PC2) is currently active.
  2. External Control: Use the provided wired external controller. This allows you to place the KVM Switch out of sight for a cleaner desktop while maintaining easy access to the switching function.
Diagram showing the two switching modes: button switch on the device and external control button.
Two switching modes: direct button press on the device or using the external wired controller.

Note: Keyboard shortcuts (hotkeys) are not supported for switching.

3.2 Display Modes

The KVM Switch supports various display modes depending on your operating system:

  • Windows: Supports both Mirror (duplicate) and Extend (MST/SST) display modes. This allows the two monitors to display two different images simultaneously.
  • macOS: Due to limitations of the macOS system, only Mirror display mode is supported. The two monitors will display identical images. macOS does not support USB-C MST (Multi-Stream Transport) for extended display mode through this device.
Diagram illustrating multiple display modes for Windows (extended and mirrored) and macOS (mirrored only).
Multiple Display Modes: Windows supports various extended and mirrored configurations, while macOS is limited to mirrored displays.

3.3 Data Transfer

The KVM Switch acts as a 13-in-1 docking station, providing multiple ports for high-speed data transfer:

  • USB 3.2 Ports (10Gbps): Two USB 3.2 ports on the front panel for connecting high-speed USB devices.
  • USB-C Data Port (10Gbps): One USB-C port on the front panel for data transfer. (Does not support PD charging or video).
  • USB 3.0 Ports: Two USB 3.0 ports, typically used for mouse and keyboard, also backward compatible with USB 2.0.
  • SD/Micro SD Card Slots: Dedicated slots for convenient data transfer from SD and Micro SD cards.
Image showing the KVM Switch with USB 3.2 ports and SD card slots, emphasizing high-speed data transfer.
USB 3.2 High-Speed Data Transfer capabilities for various file types.

3.4 EDID Emulation

The KVM Switch features EDID (Extended Display Identification Data) emulation. This function prevents desktop window rearrangement after switching between computers, ensuring a consistent and efficient workflow.

Comparison diagram showing desktop changes without EDID emulator versus stable desktop with EDID emulator.
Benefit of EDID Emulation: Prevents desktop rearrangement when switching between computers.

4. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the KVM Switch. Avoid using liquid cleaners or solvents.
  • Power Supply: The device is powered by a DC 12V/1.5A adapter. Ensure a stable power source. The docking station does not consume power from your computer and cannot supply power to connected devices, which helps protect your computer's power system.
  • Physical Care: The KVM Switch features a durable metal casing and non-slip rubber feet for stability. Handle with care to prevent drops or impacts.
Images highlighting the metal body, non-slip rubber mat, and SD/Micro SD card slots of the KVM Switch.
Product features: Robust metal body, stable non-slip rubber mat, and convenient SD/Micro SD card slots.

5. Troubleshooting

ProblemPossible CauseSolution
No display or incorrect resolution
  • Incorrect cable connections
  • Cables too long or low quality
  • Laptop USB-C port does not support video output
  • Desktop not fully connected (HDMI+DP+USB)
  • Monitor/cable does not support desired resolution
  • Verify all HDMI, DisplayPort, and USB-C cables are securely connected to the correct ports.
  • Use high-quality cables, ensuring total length does not exceed 3 meters (10 feet).
  • Confirm your laptop's USB-C port supports video output.
  • Ensure your desktop PC is connected with both HDMI, DisplayPort, and USB cables to the KVM Switch.
  • Check that your monitors and cables are rated for the desired resolution (e.g., 4K@60Hz or 4K@120Hz).
macOS only shows mirrored displaysmacOS system limitation (does not support USB-C MST for extended displays)This is a limitation of the macOS operating system, not the KVM Switch. The device will function in mirror mode for macOS.
Desktop windows rearrange after switchingEDID emulation not functioning or not supported by the specific setup.The KVM Switch includes EDID emulation to prevent this. Ensure all connections are stable. If the issue persists, it might be a specific software or driver interaction.
USB devices (mouse/keyboard/flash drive) not working
  • Loose USB connection
  • Incorrect USB port used
  • Driver issues
  • Ensure USB cables are firmly connected to the KVM Switch and your devices.
  • Verify that the USB-A 3.0 cable from your desktop is connected to the 'PC2 IN USB' port.
  • For the front USB-C port, remember it's for data only, not charging or video.
  • Try connecting the USB device directly to the computer to rule out device issues.
No power to the KVM SwitchPower adapter not connected or faultyEnsure the DC 12V power adapter is securely connected to the KVM Switch and a working power outlet.

6. Specifications

FeatureDescription
BrandAIMOS
Model NumbersSW522 (1HDMI 1DP), SW521 (2HDMI), SW523 (2DP)
TypeUSB-C HDMI DisplayPort KVM Switch Docking Station
CertificationCE, FCC, RoHS
OriginMainland China
Weight0.65 kg
Dimensions (LxWxH)15 x 8 x 5 cm
External Power SourceYes (DC 12V/1.5A)
Plug TypeEU Plug (US option available)
AmplifierNo
High-Concerned ChemicalNone
Connector A (Inputs)USB, Type-C, HDMI-Compatible, Mini DisplayPort (Mini DP)
Connector B (Outputs)DP/Mini DP, Type-C (Data), DC5521, USB, Card Reader, HDMI-Compatible
Video Resolution (SW522)HDMI: Up to 4K@60Hz; DisplayPort: Up to 4K@120Hz
Video Resolution (SW521)HDMI: Up to 4K@60Hz (Dual HDMI)
Video Resolution (SW523)DisplayPort: Up to 4K@120Hz (Dual DisplayPort)
USB Data Transfer SpeedUSB 3.2 Gen2: Up to 10Gbps; USB 3.0: Up to 5Gbps
Card ReaderSD Card Slot, Micro SD Card Slot
Display ModesWindows: MST (Extended), SST (Mirrored); macOS: Mirrored Only
Switching MethodsPanel Button, External Wired Controller
MaterialAluminum Metal

7. User Tips

Based on common user experiences and product features, here are some tips for optimal use:

  • Cable Quality and Length: Always use high-quality cables for video and data connections. Keep cable lengths as short as possible, ideally under 3 meters (10 feet), to maintain signal integrity, especially for high resolutions like 4K@120Hz.
  • Laptop USB-C Compatibility: For laptop connections, ensure your USB-C port supports video output (DisplayPort Alternate Mode or Thunderbolt). Not all USB-C ports have this capability.
  • Desktop PC Connections: For desktop computers, it is crucial to connect all three inputs to the KVM Switch: HDMI, DisplayPort, and the USB-A 3.0 cable. Missing any of these will result in incomplete functionality (e.g., no video or no KVM control).
  • macOS Display Behavior: Be aware that macOS systems will only support mirrored displays through this KVM Switch due to system limitations regarding MST over USB-C.
  • Front USB-C Port: The USB-C port on the front panel is strictly for data transfer (e.g., connecting a USB-C flash drive) and does not support power delivery (charging) or video output.
  • No Hotkey Switching: This KVM Switch does not support hotkey switching via keyboard commands. Use the physical button on the device or the external wired controller.

8. Warranty and Support

AIMOS provides 12 months of technical support for this product. If you encounter any issues or have questions regarding the setup, operation, or performance of your KVM Switch Docking Station, please contact our professional technical support team for assistance. Refer to your purchase documentation for contact details.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.