UeeVii CPE451

Contents

UeeVii CPE451 5.8G Point to Point Wireless Bridge User Manual

Model: CPE451 | Brand: UeeVii

1. Introduction

The UeeVii CPE451 is a 5.8G outdoor wireless bridge designed for long-distance point-to-point or point-to-multipoint network data transmission. It utilizes wireless communication technology to extend network connectivity up to 2 kilometers, making it suitable for applications such as extending home networks to outbuildings (garages, barns, shops) or for wireless video surveillance systems. The device features a 12dBi high-gain antenna and supports a wireless transmission speed of up to 300Mbps, with a 100Mbps RJ45 LAN port for wired connections.

2. Product Overview

The CPE451 wireless bridge system consists of two units that establish a stable 5.8G wireless link. It is optimized for high-speed video transmission and offers enhanced anti-interference capabilities. The system supports 24V Power over Ethernet (PoE) for simplified installation and centralized management.

2.1 Package Contents

The standard package includes:

  • 2 x CPE451 Wireless Bridge Units
  • 2 x 24V PoE Adapters
  • 2 x Ethernet Cables
  • 2 x Metal Mounting Bands
  • 1 x User Manual (Quick Start Guide)
Package contents of UeeVii CPE451 Wireless Bridge, showing two bridge units, two PoE adapters, two Ethernet cables, two metal mounting bands, and a user manual.

Figure 1: UeeVii CPE451 Wireless Bridge Package Contents

3. Specifications

FeatureSpecification
ModelCPE451
BrandUeeVii
Wi-Fi Transmission Standard802.11ac
Wi-Fi Supported Frequency5G (5 GHz)
Wireless Transmission Rate (Bridge Link)Up to 300Mbps
Max. LAN Data Rate (Physical Port)100Mbps (1 x 10/100/1000Mbps WAN Port, 2 x LAN Ports)
Antenna TypeInternal 12dBi High Gain Antenna
Transmission DistanceUp to 2KM (Line of Sight)
Power Supply24V PoE Adapter
Supports WPSYes
Supports WDSYes
Support MeshNot Supported
Application EnvironmentOutdoor
CertificationCE

Note on data rates: The wireless link between the two bridge units supports up to 300Mbps. The physical RJ45 LAN ports on the bridge units support a maximum wired network speed of 100Mbps.

4. Setup and Installation

4.1 Initial Pairing

The CPE451 wireless bridges are designed for easy pairing. Follow these steps:

  1. Identify one unit as the "Master Bridge" and the other as the "Slave Bridge".
  2. On each unit, locate the H-C buttons.
  3. Set the H-C button on the Master Bridge to the "H" side.
  4. Set the H-C button on the Slave Bridge to the "C" side.
  5. Within one minute of setting the buttons, press the "RST" (Reset) button on both units.
  6. The pairing process should complete within 2 minutes.
Diagram showing two UeeVii wireless bridges. One is labeled 'Master Bridge' with its H-C button set to H, and the other is 'Slave Bridge' with its H-C button set to C. Both show a 'RST' button to be pressed for pairing.

Figure 2: Easy Pairing Process

4.2 Physical Installation and Mounting

The CPE451 is an outdoor device and should be mounted in a location that provides a clear line of sight between the two bridge units.

  • Use the provided metal mounting bands to securely attach each bridge unit to a pole or suitable outdoor structure.
  • Ensure the units are installed "face to face" with no physical obstructions (like walls, large trees, or buildings) between them to achieve the maximum transmission distance of 2KM.
Diagram illustrating two UeeVii wireless bridges positioned 2 KM apart, with a clear line of sight over a city landscape, emphasizing 'must install face to face, no wall blocking in between'.

Figure 3: Optimal Transmission Distance and Line of Sight

4.3 Power and Network Connection

Connect each CPE451 unit to its respective 24V PoE adapter using an Ethernet cable. The PoE adapter will provide both power and data connectivity to the bridge unit.

  • Master Bridge Connection: Connect the LAN port of the Master Bridge's PoE adapter to your main network source (e.g., a router or network switch).
  • Slave Bridge Connection: Connect the LAN port of the Slave Bridge's PoE adapter to the device you wish to provide network access to (e.g., a PC, IP camera, or another network switch).
Connection Topology diagram showing two scenarios: 1) A router connected via PoE to a Master Bridge, wirelessly linked to a Slave Bridge, which is connected via PoE to a PC. 2) An IP Camera connected via PoE to a Master Bridge, wirelessly linked to a Slave Bridge, which is connected via PoE to a switch, then to a DVR and monitor.

Figure 4: Connection Topology Examples

5. Operation

Once properly installed and powered, the UeeVii CPE451 wireless bridge system operates automatically to establish and maintain a 5.8G wireless link between the two units.

  • Network Extension: The system acts as a transparent bridge, extending your existing network from the Master Bridge side to the Slave Bridge side. Any device connected to the Slave Bridge's LAN port will receive network access as if it were directly connected to your main network.
  • High-Speed Transmission: The 5.8G frequency band provides a stable and less congested channel for wireless data transmission, supporting speeds up to 300Mbps between the bridge units. This is particularly beneficial for high-bandwidth applications like video surveillance.
  • Wired Connectivity: The 100Mbps RJ45 LAN ports on each bridge unit allow for reliable wired connections to end devices or network infrastructure.

6. Maintenance

The CPE451 wireless bridge is designed for low power consumption and high performance.

  • Centralized Management: The system supports AC management, allowing for centralized monitoring and maintenance of all paired bridge units.
  • Environmental Considerations: Regularly check the physical installation to ensure the line of sight between units remains clear and that the units are securely mounted. Keep the devices free from excessive dust or debris.
  • Reusability: The wireless bridge units can be easily relocated and reconfigured for new applications, offering flexibility and potential cost savings.

7. Troubleshooting

  • Check Power: Ensure both bridge units are properly powered via their 24V PoE adapters and that the adapters are plugged into working power outlets.
  • Verify Cables: Confirm all Ethernet cables are securely connected between the bridges, PoE adapters, and network devices (router, PC, IP camera).
  • Line of Sight: Ensure there are no new obstructions (e.g., growing trees, new buildings) blocking the direct line of sight between the Master and Slave bridges.
  • Re-Pairing: If the link is lost or unstable, try re-pairing the units by following the "Initial Pairing" steps in Section 4.1.
  • Reset: If issues persist, perform a factory reset on both units (refer to the full user manual for specific reset procedures, usually involves holding the RST button for an extended period).

7.2 Slow Network Speed

  • Line of Sight: Even partial obstructions can degrade performance. Ensure the line of sight is as clear as possible.
  • Interference: While 5.8G is generally less congested, other 5.8G devices or strong electromagnetic fields could cause interference. Try adjusting the mounting position slightly if possible.
  • Distance: Ensure the distance between the bridges is within the recommended 2KM limit. Performance may degrade significantly beyond this range or with poor line of sight.
  • Cable Quality: Ensure the Ethernet cables used are of good quality and not damaged.

8. User Tips

  • For optimal performance, always ensure a clear, unobstructed line of sight between the two bridge units. Even small obstacles can significantly impact signal strength and data rates.
  • When setting up, temporarily position the units closer to each other to confirm pairing and basic functionality before mounting them in their final long-distance locations.
  • Consider using a network cable tester to verify the integrity of your Ethernet cables if you suspect connection issues.

9. Warranty and Support

The UeeVii CPE451 Wireless Bridge comes with a 12-month manufacturer's limited warranty covering defective items from the date of receipt. This warranty does not cover damage resulting from misuse or unauthorized modifications.

For technical support, warranty claims, or further assistance, please contact your retailer or the manufacturer directly. Refer to the contact information provided with your purchase documentation.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.