1. Introduction
Thank you for choosing the DOOYA DC1653 Electric Curtain Smart Home Transmitter. This single-channel, wireless remote control is designed for convenient operation of your electric curtains. Its wall-sticker design allows for easy placement and integration into your smart home system. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.
2. Package Contents
Please check the package carefully for the following items:
- 1 x DOOYA DC1653 Wireless Remote Control
- 1 x Mounting Base (for wall attachment)
- 1 x Insulating Partition Paper (pre-installed in battery compartment)
Note: This product does not include batteries. You will need to purchase a 3V battery separately.
3. Specifications
| Feature | Detail |
|---|---|
| Product Brand | DOOYA |
| Product Name | DC1653 |
| Model Number | DC1653 |
| Wattage / Voltage | 3V |
| Transmission Frequency | 433MHz |
| Controllable Range | 60M |
| Supports Motor Types | Dooya built-in motor (excluding Dooya V1 motor), SUNFlower built-in motor |
| Dimensions | 86mm x 86mm |
| Battery Included | No |
| Certification | CE |
| Origin | Mainland China |
| Package Weight | 0.15 kg |
| Package Dimensions | 10cm x 10cm x 4cm |
4. Setup
4.1 Battery Installation
- Locate the battery cover plate on the back of the remote control (refer to Figure 4).
- Gently slide or pry open the battery cover.
- Insert the required 3V battery, ensuring correct polarity (+/-).
- Remove the insulating partition paper if it is still present.
- Replace the battery cover plate securely.
4.2 Mounting the Remote Control
The DC1653 features a wall-sticker design for easy installation:
- Choose a clean, dry, and flat surface on your wall for mounting.
- Peel off the protective film from the adhesive backing of the remote's base.
- Firmly press the remote control onto the desired wall location for a few seconds to ensure good adhesion.
4.3 Pairing with Electric Curtain Motor
To control your electric curtains, the remote control must be paired with the motor. The exact pairing procedure may vary slightly depending on your specific Dooya or SUNFlower motor model. Please refer to your motor's instruction manual for precise pairing steps. Generally, the process involves:
- Ensure the electric curtain motor is powered on.
- Locate the pairing button or function on your motor (often a small button on the motor head or a specific power cycle sequence).
- Activate the pairing mode on the motor.
- Within a short timeframe (usually a few seconds), press and hold a specific button on the DC1653 remote control (e.g., the 'Stop' button or a dedicated pairing button if available) until the motor responds (e.g., jogs slightly, beeps, or LED flashes).
- Test the remote control to ensure successful pairing.
5. Operation
The DC1653 remote control features intuitive buttons for controlling your electric curtains:
- Up Key (^): Press to open the curtains.
- Down Key (v): Press to close the curtains.
- Stop Key (o): Press to stop the curtains at any desired position.
- Channel Selection Buttons (+ / -): Use these buttons to cycle through different control channels if your motor supports multi-channel operation or if you have multiple curtain motors paired. The current channel number will be displayed on the LCD screen.
6. Maintenance
6.1 Cleaning
To clean the remote control, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these may damage the surface or internal components.
6.2 Battery Replacement
When the remote control's range decreases or it becomes unresponsive, it's likely time to replace the battery. Follow the battery installation steps in Section 4.1 to replace the 3V battery. Ensure proper disposal of old batteries according to local regulations.
7. Troubleshooting
- Remote not responding:
- Check if the battery is correctly installed and has sufficient power. Replace if necessary.
- Ensure the remote is within the 60M controllable range of the motor.
- Verify that the remote is paired with the correct motor and channel. Re-pair if unsure.
- Curtains not moving smoothly:
- This is likely an issue with the motor or curtain track, not the remote control. Consult your curtain motor's manual.
- LCD display is blank or dim:
- Replace the battery.
8. User Tips
No specific user tips are available from customer reviews or Q&A for this product at this time. For best performance, ensure the remote is mounted in a central location within the controllable range of your curtain motor(s).
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or the DOOYA customer service directly. Keep your purchase receipt as proof of purchase.