1. Introduction and Overview
The Jikong JKBMS B1A8S10P-HC is an intelligent Battery Management System (BMS) designed for large-capacity series lithium battery packs. It provides comprehensive management and protection for LiFePO4, Li-ion, and LTO battery types, supporting 4S to 8S configurations.
Key features include high-precision voltage and current acquisition, 1A active balancing, overcharge, over-discharge, overcurrent, over-temperature, and short-circuit protection. It also integrates a coulomb meter, Bluetooth communication, GPS remote functionality, and an optional heating function. The BMS is compact, easy to operate, and suitable for various applications such as small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage, base station backup power supplies, and solar power stations.
The active balancing technology, based on proprietary energy transfer, ensures battery consistency, extends battery life, and delays aging by transferring energy from high-voltage cells to low-voltage cells.

Figure 1: JKBMS B1A8S10P-HC overview with key specifications.

Figure 2: Feature codes for JKBMS models (H=HEAT, C=CAN, R=RS485, P=Parallel, B=Buzzer).
2. Specifications
2.1. Basic Parameters
| Parameter | Value | Unit |
|---|---|---|
| Supply Voltage | 10-36 | V |
| Operating Power Consumption | <900 | mW |
| Operating Temperature | -30 to 70 | °C |
| Maximum Number of Collection Strings | 8 | String |
| Maximum Balancing Current | 1 | A |
| Maximum Charging Current | 100 | A |
| Maximum Discharge Current | 100 | A |
| Maximum Instantaneous Current | 200 | A |
| Maximum Internal Loop Resistance | 0.8 | mΩ |
| Protective Plate Size | 153.9 × 107 × 17.6 | mm |
| Finished Weight | 411 | g |
2.2. Default Parameters (Example for LiFePO4)
| Parameter | LiFePO4 Default | Unit |
|---|---|---|
| Balancing Initial Voltage | 3 | V |
| Maximum Balancing Current | 1 | A |
| Unit Overcharge Voltage | 3.6 | V |
| Single Overcharge Protection Recovery | 3.55 | V |
| Monomer Undervoltage Protection | 2.6 | V |
| Single Undervoltage Protection Recovery | 2.65 | V |
| Automatic Shutdown Voltage | 2.5 | V |
| SOC-0% Voltage | 2.6 | V |
| SOC-100% Voltage | 3.5 | V |
| Trigger Balancing Differential Pressure | 0.01 | V |
| Charging Overcurrent Protection Delay | 30 | S |
| Charge Overcurrent Protection Release Time | 60 | S |
| Discharge Overcurrent Protection Delay | 300 | S |
| Discharge Overcurrent Protection Release Time | 60 | S |
| Short-circuit Protection Delay | 1500 | uS |
| Charging Overtemperature Protection | 70 | °C |
| Charging Overtemperature Restore | 60 | °C |
| Discharge Overtemperature Protection | 70 | °C |
| Discharge Overtemperature Recovery | 60 | °C |
| Charging Low Temperature Protection | -20 | °C |
| Charging Low Temperature to Restore | -10 | °C |
| MOS Overtemperature Protection | 100 | °C |
| MOS Overtemperature Protection Recovery | 80 | °C |
| Device Address | 0 | / |
| Discharge Precharge Time | 0 | S |
3. Setup and Installation
3.1. Package Contents
Before installation, please verify that all components are present:
- JKBMS B1A8S10P-HC Protection Board
- NTC Temperature Sensor (40cm)
- Switch (50cm)
- Balance Wires (70cm)
- Operating Manual (PDF, refer to link below)
- Pack Box

Figure 3: JKBMS package contents including BMS, NTC, switch, wires, and manual.
3.2. Interface Definition
The JKBMS B1A8S10P-HC board features several interfaces for connection and control:

Figure 4: Detailed view of the JKBMS board with NTC, GPS, RS485/CAN, Parallel Interface, and Sampling ports labeled.
Balance and Acquisition Interface (XH-10AW-2.54)
- Pin 1 (B-): Total negative battery
- Pin 2 (B1): Positive pole of the first battery string
- ...
- Pin 9 (B8): Positive pole of the eighth battery string
- Pin 10 (B+): Protection board power supply, connected to the battery total positive.
Display Interface (A1254WF-6A)
- Pin 1 (VCC): Display power output
- Pin 2 (A): Display RS485 signal positive
- Pin 3 (B): Display RS485 signal negative
- Pin 4 (GND): Negative terminal
- Pin 5 (K+): Activate positive signal
- Pin 6 (K-): Activation signal negative electrode
Temperature Interface (HY2.0-4P)
- T1A/T1B: First temperature sensor pins
- T2A/T2B: Second temperature sensor pins
- T3A/T3B: Third temperature sensor pins (optional)
- T4A/T4B: Fourth temperature sensor pins (optional)
Buzzer Interface (A1254WF-2A)
- Pin 1 (VCC): Buzzer power supply positive
- Pin 2 (GND): Buzzer power negative
GPS Interface (1.25T-4PWT)
- Pin 1 (VGPS): Power output, voltage close to B+
- Pin 2 (TX): UART TX, 3.3V
- Pin 3 (RX): UART RX, 3.3V
- Pin 4 (GND): Power/signal ground
Communication Interface (A1254WF-4A, Optional)
- RS485 B: RS485 signal negative
- RS485 A: RS485 signal positive
- CAN H: CAN signal positive
- CAN L: CAN signal negative
Parallel Interface (A1254WF-3A, Optional)
- P-EN: Parallel module enable signal (output low level to turn on parallel module)
- P-status: Parallel module status signal
Heating Wire (16AWG-Orange-15CM, Optional)
- HT-: Heater element negative electrode
3.3. Wiring Instructions
The JKBMS B1A8S10P-HC is suitable for 3-8 series lithium battery packs. The specific wiring method depends on the number of cells in your battery pack. Always ensure correct connections to prevent damage.
General Wiring Steps:
- Connect the balance wires (sampling cables) to each cell's positive terminal, starting from B1 (first string positive) up to B8 (eighth string positive). The black cable (B0) connects to the total negative pole of the battery.
- Verify the balance wire connections using a multimeter. Measure the voltage between adjacent wires. If the voltage difference between the batteries in each string of wires is less than 1V, it indicates correct connection.
- Connect the P- cable from the BMS to the negative pole of the charger and load.
- Connect the total positive pole of the battery to the positive pole of the charger and load.
- Connect the GPS module (if applicable) to the GPS interface.
- Connect the switch button to the designated port.
Video 1: JIKONG BMS Wiring Tutorial. This video demonstrates the step-by-step process of connecting the balance wires, verifying connections, and connecting the main power cables to the BMS, battery pack, charger, and load.

Figure 5: Detailed wiring diagram showing connections for the battery pack, sampling cable, BMS, motor/load, and charger.

Figure 6: JKBMS B1A8S10P-HC with heating cable connected.
Important Safety Note: Before powering on the protection board, double-check all balance cable connections, and ensure P- and B- are correctly connected. The protection board must be securely fixed to the battery core. Incorrect wiring can lead to abnormal operation or damage to the components.
4. Operating Instructions
4.1. Device Activation
The JKBMS does not have a physical power-on switch. It is designed for charging activation mode. After the battery assembly is complete, connect the charger (charger voltage 2V higher than battery voltage) to activate the BMS. Alternatively, if you have a display screen and button, connect the cable to the display interface and press the button to activate.
4.2. APP Installation and Connection
The JKBMS features a mobile APP for Android and iOS systems, allowing you to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth.
- Download the APP: Scan the QR code below to download the mobile APP. Android version 7 or higher is required.
- Enable Bluetooth: Turn on Bluetooth on your mobile phone.
- Search and Connect: Open the APP, click the scan button (usually in the top left corner or labeled 'Scan') to search for available BMS devices. Select your device (e.g., 'JK_B2A24S15P') from the list.
- Enter Password: The default connection password is '1234'.
- Set Parameters (First Use): For the first startup, you will need to set basic parameters. The default parameter setting password is '123456'. Simply set the number of units (cell count) and battery type (Li-ion, LiFePO4, LTO).
- Monitor Data: After setting parameters, navigate to the real-time status page to check battery status. Ensure no error messages are displayed. The APP will show individual cell voltages, with the highest voltage typically highlighted in blue and the lowest in red.

Figure 7: Intelligent JKBMS APP interface showing real-time data and settings. Download via Google Play or App Store.

Figure 8: Mobile APP page display supporting active balancing and various settings.

Figure 9: Mobile APP link QR code for Jikong JKBMS.
4.3. Smart Energy Working Modes
The BMS supports different working modes to optimize battery management:
- Storage Mode: In transportation, offline, or wireless transmission off mode, the BMS enters storage mode, which does not consume battery pack current.
- Normal Working Mode: When the charger is inserted in storage mode and turned off, the BMS immediately returns to normal working mode, and all protection, equalization, and communication functions resume.
- Shutdown: To prevent the BMS from wasting power for a long time and damaging the battery pack, the BMS has an automatic shutdown voltage. It automatically shuts down when a cell falls below this voltage.
- Standby Mode: When the battery pack is in a static state (no charge/discharge current and no equilibrium current), the BMS automatically enters standby state after a set time (1-30 days, configurable).

Figure 10: Diagram illustrating the smart energy working mode switching logic.
4.4. Functional Features
- Active Equalization: Transfers energy from high-voltage cells to low-voltage cells with a continuous 1A balance current. The balance trigger pressure difference (mV) can be set via the APP.
- GPS & Display Interface: Reserved ports for optional GPS modules (for battery location) and display screens (for viewing battery information).
- Heating Function (Optional): Heats the battery at low temperatures using a resistance heater or heating film to maintain battery activity. Designed heating current is 4A. A temperature control switch (45-65°C normally closed) is recommended for secondary protection.
- Alarm Function: Provides external alerts when the BMS detects safety risks such as overtemperature, overcharge, or over-discharge.
- Battery Pack Parallel Function (Optional): Supports parallel connection of battery packs for energy storage applications, requiring synchronous use with parallel modules and disabling 'charging current limiting' in the APP.
- Charge Overvoltage Protection & Recovery: Standard feature. Users can set single overcharge protection voltage and recovery voltage via the APP. Charging is cut off if any cell exceeds the set voltage and resumes when all cells are below the recovery voltage.
- Discharge Undervoltage Protection & Recovery: Standard feature. Users can set battery undervoltage protection voltage, recovery voltage, and automatic shutdown voltage via the APP. Discharge is cut off if any cell falls below the set voltage and resumes when all cells are above the recovery voltage. The BMS automatically shuts down if any cell falls below the automatic shutdown voltage.
- Charge Overcurrent Protection & Recovery: Standard feature. Users can set continuous charging current, delay, and release time via the APP. Charging is cut off if current exceeds the set value for the specified delay and resumes after the release time.
- Discharge Overcurrent Protection & Recovery: Standard feature. Users can set continuous discharge current, delay, and release time via the APP. Discharge is cut off if current exceeds the set value for the specified delay and resumes after the release time. (Max continuous discharge current should not exceed 100A).
- Overtemperature Protection & Recovery: Standard feature for charge and discharge. Users can set protection and recovery temperatures via the APP. Charging/discharging is cut off if temperature exceeds the set value and resumes when it falls below the recovery value.
- Low Temperature Protection & Recovery: Standard feature for charging. Users can set protection and recovery temperatures via the APP. Charging is cut off if temperature falls below the set value and resumes when it rises above the recovery value. Heating function is recommended for extremely cold areas.
- Short Circuit Protection & Recovery: Standard feature. Users can set short circuit protection delay (us) and recovery time (S) via the APP. Protection is triggered by high peak currents during charger startup or load connection.
- Discharge Precharge Function (Optional): Default precharge time is 5S. Users can enable or disable precharge via the APP.
- Emergency Switch: Standard feature. When activated via the APP, the BMS will enable charge and discharge for 30 minutes, allowing emergency use even if protection conditions are met (e.g., low cell voltage).
- Intelligent Sleep: Standard feature. The BMS enters sleep mode if charge/discharge current is less than 1A for 26 consecutive hours, reducing power consumption. It can be reactivated by pressing the button or connecting a charger.
- Communication Function (Optional): Supports CAN/RS485. Users can set the address and communication protocol via the APP. Refer to the Jikong Protection Board communication protocol document for details.
5. Maintenance
Regular maintenance of your JKBMS involves ensuring proper connections and monitoring battery health through the mobile APP. Keep the BMS clean and free from dust and moisture.
- Connection Check: Periodically inspect all wiring for secure connections, especially the balance wires and main power cables. Loose connections can lead to inaccurate readings or system malfunctions.
- Firmware Updates: Check the Jikong official website or APP for any available firmware updates to ensure optimal performance and access to new features.
- Parameter Review: Occasionally review the parameters set in the APP to ensure they align with your battery's current state and usage requirements.
- Environmental Conditions: Operate the BMS within its specified temperature range (-30°C to 70°C). If operating in extreme cold, utilize the heating function to protect battery cells.
6. Troubleshooting
If you encounter issues with your JKBMS, refer to the following common troubleshooting steps:
- BMS Not Activating: Ensure the total battery pack voltage is above 20V (or 10V for 4S BMS). Connect a charger (with voltage 2V higher than battery voltage) to activate the BMS. If using a display and button, ensure it's connected and the button is pressed.
- Incorrect Voltage Readings: Verify all balance wire connections are correct and secure. Use a multimeter to check the voltage between adjacent wires; differences should be less than 1V.
- Overcurrent/Short Circuit Protection Triggering: If protection is triggered during charging, it might be due to a high peak current from the charger. Increase the short circuit protection delay in the APP. If triggered during discharge, ensure external wiring to the load has no short circuits and consider increasing the discharge short circuit protection delay.
- Battery Imbalance: Ensure the active equalization function is enabled in the APP and parameters like balance trigger differential pressure are set appropriately.
- APP Connection Issues: Ensure Bluetooth is enabled on your phone and the BMS. Try restarting the APP or the BMS. Verify the correct password ('1234') is entered.
- Heating Function Not Working: Check if your BMS model supports heating (look for 'Heat' in the model name). Ensure the heating film or charger is correctly connected. Verify that the battery temperature is below the low-temperature protection threshold for charging.
7. User Tips
- For optimal battery longevity, regularly monitor individual cell voltages via the APP to ensure they remain balanced.
- When setting up for the first time, carefully double-check all wiring before connecting the main power to avoid potential damage.
- If you experience frequent protection triggers, review your APP settings for current and voltage thresholds, ensuring they are appropriate for your battery and load.
- In cold environments, utilizing the heating function can significantly improve battery performance and extend its lifespan.
8. Product Certification
The Jikong BMS products are certified to international standards, ensuring quality and safety.

Figure 11: Jikong BMS has RoHS, FCC, and CE certifications.
9. Support and Further Information
For detailed information, including the full user manual and communication protocols, please refer to the official documentation:
- User Manual (PDF): A comprehensive PDF manual is available for download. View User Manual (PDF)
- Instructions & BMS Protocol: Additional resources can be found on GitHub:
- Instructions: https://github.com/JIKBMS/files/tree/main
- BMS Protocol: https://github.com/syssi/esphome-jk-bms