Todaair Smart WiFi Extender AC1200Mbps User Manual

1. Introduction

The Todaair Smart WiFi Extender AC1200Mbps is designed to expand your existing Wi-Fi network coverage, providing stable and high-speed internet access in outdoor and hard-to-reach areas. Featuring dual-band technology, IP65 weatherproof protection, and easy setup, this device ensures reliable connectivity for a wide range of devices.

2. Key Features

• Powerful Performance: The device includes an automatic network timing detection and repair function, ensuring continuous connectivity even during network disruptions. It is compatible with all major routers and supports both Repeater and Access Point (AP) modes. The integrated Ethernet port allows for wired connections to devices like computers or IP cameras.



• Weatherproof Design (IP65 Protection): Built with an IP65 waterproof housing, this extender is resistant to water, dust, frost, high temperatures, and corrosion. This robust design ensures stable operation in harsh outdoor environments and extreme climates, with an operating temperature range of -30°C to 65°C and humidity tolerance of 10% to 90% (non-condensing).





• Exclusive Super Coverage: Provides directional transmission to extend Wi-Fi coverage up to 300 feet (approximately 100 meters). It can connect up to 65 devices simultaneously, including laptops, smartphones, speakers, IP cameras, tablets, and IoT devices, effectively eliminating Wi-Fi dead zones in gardens, outdoor spaces, or backyards.





• Enhanced Security: Supports WPA-PSK/WPA2-PSK and WPA/WPA2 wireless security protocols to maximize network security and protect your personal data from unauthorized access.



• AC1200 Dual-Band Technology: Utilizes the IEEE802.11AC-Wave2 wireless protocol for improved stability and reduced signal attenuation. It offers a maximum speed of 867Mbps on the 5GHz band and 300Mbps on the 2.4GHz band.
• Versatile Applications: Suitable for various uses including smart garden appliances, intelligent visual door locks, outdoor surveillance IP cameras, general internet surfing, and multimedia streaming (e.g., projectors).

3. Specifications

4. Package Contents

The package typically includes the following items:

• Todaair Smart WiFi Extender AC1200Mbps Unit
• Power Adapter (specific plug type: EU Plug, US Plug, or UK Plug, depending on selection)
• Quick Installation Guide (or User Manual)
• Ethernet Cable (may vary by package)
• Mounting Accessories (for outdoor installation)

5. Setup Guide

Follow these steps for initial setup of your Todaair Smart WiFi Extender:

1. Placement: Place the WiFi Extender next to your main router for initial configuration.
2. Power On & Connect: Plug in the extender. Connect to the extender's default Wi-Fi network on your smartphone or computer.
3. Configuration: Open a web browser and navigate to the extender's setup page (refer to the Quick Installation Guide for the specific IP address or domain). Follow the on-screen instructions to connect the extender to your main router's Wi-Fi network. You will need to enter the correct password for your main router's Wi-Fi.
4. Set Repeater SSID and Password: Configure a new SSID (Wi-Fi network name) and password for the extended network. The extender features a one-time setting with a memory function, so once configured, it retains settings.
5. Installation: Once successfully configured, unplug the extender and move it to the desired location where you want to expand Wi-Fi coverage. Ensure it is within range of your main router's signal and provides adequate coverage to the target area.

For a visual guide, please refer to the official product video:

6. Operating Instructions

Once the extender is set up and installed in its final location, it will broadcast the extended Wi-Fi network. You can connect your devices to this network just as you would to any other Wi-Fi network.

• Connecting Devices: On your Wi-Fi enabled device (smartphone, tablet, laptop, etc.), scan for available Wi-Fi networks. Select the SSID you configured for the extender (e.g., "MyHome_Extended") and enter the password.
• Dual-Band Usage: The extender supports both 2.4GHz and 5GHz bands. For wider coverage and better penetration through walls, use the 2.4GHz band. For higher speeds and less interference in closer proximity, use the 5GHz band. Many modern devices can automatically switch between bands for optimal performance.
• Ethernet Port Usage: If you are using the extender in AP mode or simply need a wired connection, connect an Ethernet cable from the extender's Ethernet port to your wired device (e.g., a desktop computer, smart TV, or IP camera).

7. Maintenance

The Todaair Smart WiFi Extender is designed for durability, especially in outdoor conditions. Minimal maintenance is required:

• Cleaning: Periodically wipe the exterior of the device with a soft, damp cloth to remove dust or dirt. Do not use harsh chemicals or abrasive cleaners.
• Firmware Updates: Check the manufacturer's website periodically for firmware updates. Keeping the firmware updated ensures optimal performance, security, and compatibility.
• Physical Inspection: Occasionally inspect the device and its connections for any signs of damage, especially if installed outdoors. Ensure all cables are securely connected.

8. Troubleshooting

• No Internet Connection:
  • Verify that your main router has an active internet connection.
  • Check the extender's status indicators (LEDs) to ensure it is powered on and connected to your main router.
  • The extender features automatic network timing detection and repair. If a temporary disconnection occurs, the device will attempt to repair the network without manual intervention.
  • If the extender is powered off, your devices will lose connection. Ensure the power supply is stable.
• Weak Signal or Slow Speed:
  • Relocate the extender closer to your main router or to a more central location between your router and the desired coverage area.
  • Ensure there are no major obstructions (thick walls, large metal objects) between the extender and your devices.
  • Try connecting to the 5GHz band for higher speeds if your device is close to the extender, or the 2.4GHz band for better range.
• Unable to Access Setup Page:
  • Ensure your device is connected to the extender's Wi-Fi network (or via Ethernet directly to the extender).
  • Double-check the IP address or domain name for the setup page (usually found in the Quick Installation Guide).
  • Try clearing your browser's cache or using a different browser.
  • Perform a factory reset on the extender (refer to the Quick Installation Guide for instructions) and try the setup process again.

9. User Tips

• Optimal Placement: For best results, place the extender roughly halfway between your router and the area where you need improved Wi-Fi. Avoid placing it near large metal objects, microwave ovens, or cordless phones, which can cause interference.
• Security Best Practices: Always use strong, unique passwords for your Wi-Fi networks. Regularly change your Wi-Fi password for enhanced security.
• Wired Connections: Utilize the Ethernet port for devices that require a stable, high-speed connection, such as gaming consoles, smart TVs, or desktop computers, to free up wireless bandwidth for other devices.
• Regular Reboots: Occasionally restarting both your main router and the WiFi extender can help resolve minor connectivity issues and improve overall network performance.

10. Warranty and Support

Todaair provides professional technical team support for this Smart WiFi Extender. If you encounter any problems during installation or use, please contact the technical support team for assistance. They are available to help you resolve issues as soon as possible.

Please refer to your purchase documentation or the manufacturer's official website for specific warranty terms and contact information.