Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Coban BAANOOL GPS Tracker 401D. This device is designed for real-time tracking and management of motorcycles, small cars, and e-bikes, offering features such as GPS+LBS tracking, geo-fencing, and various alarms. Please read this manual carefully before using the product to ensure proper functionality and safety.
Image: The Coban BAANOOL GPS Tracker 401D with its packaging.
Package Contents
Upon opening the package, please verify that all the following items are included:
- GPS-401D Tracker x 1
- Remote Controller x 1
- Connector Wire (Wiring Harness) x 1
- Relay x 1
- User Manual x 1
- Product Box x 1
Image: All components included in the GPS Tracker 401D package.
Specifications
The following table details the technical specifications of the GPS Tracker 401D:
| Attribute | Value |
|---|---|
| Product Name | GPS TRACKER |
| Model | 401CD |
| Dimensions (DIM.) | 6.78 x 4.1 x 2.15 CM |
| Weight | 58g |
| Network | GSM/GPRS/LTE |
| Band 4G | B1/B2/B3/B4/B5/B7/B8/B28/B40 |
| Band 2G | 850/900/1800/1900Mhz |
| GPS Sensitivity | -165dBm |
| GPS Accuracy | 5m |
| Time To First Fix (Cold status) | 45s |
| Time To First Fix (Warm status) | 35s |
| Time To First Fix (Hot status) | 1s |
| Voltage of Power | 12V-24V |
| Battery | Chargeable 3.7V 90mAH Li-ion battery |
| Storage Temp. | -40°C to +85°C |
| Operation Temp. | -20°C to +45°C |
| Humidity | 5%--95% non-condensing |
Image: Detailed specifications table for the GPS Tracker 401D.
Setup and Installation
1. SIM Card Installation
The device requires a 4G SIM card for network connectivity. Ensure the SIM card is active and has sufficient data balance. Locate the SIM card slot on the side of the tracker, open the protective cover, and insert the SIM card as shown in the diagram. Close the cover securely to maintain the IP67 waterproof rating.
Image: Side view of the tracker with the SIM card slot exposed.
2. Wiring Diagram
Carefully follow the wiring diagram below for proper installation. Incorrect wiring can damage the device or the vehicle's electrical system. The tracker operates on a DC voltage range of 9-100V.
Image: Wiring diagram illustrating connections for power, ACC, SOS, alarm siren, and oil/power cut relay.
- Red Wire: Connect to positive power supply (IN 9-100V).
- Black Wire: Connect to negative power supply (-power).
- White Wire: Connect to ACC (Ignition).
- Yellow Wire: Connect to Oil and Power Cut (Relay).
- Violet Wire: Connect to SOS button.
- Pink Wire: Connect to Alarm Siren.
Ensure all connections are secure and insulated to prevent short circuits and water damage.
Operating Instructions
1. Power On and Initializing
Once correctly wired and the SIM card is inserted, the device will power on automatically when the vehicle's ignition is turned on. The tracker will then begin to acquire GPS and LBS signals. The Time To First Fix (TTFF) can vary:
- Hot status (re-acquiring signal): 1 second
- Warm status (recent signal): 35 seconds
- Cold status (first time or long off): 45 seconds
2. Real-time Tracking via Web Platform
The BAANOOL IOT web platform provides free real-time tracking services. You can access it via www.baanool.net.
- Open your web browser and navigate to www.baanool.net.
- If you are a new user, click "Click to register" to create an account. You will need to enter the IMEI number of your device, a username, password, and mobile phone number.
- Once registered, log in with your account credentials.
- The platform will display the real-time location of your tracker on a map.
Image: BAANOOL IOT Web Platform login and registration screen.
3. Real-time Tracking via Mobile App
A dedicated mobile application, "BAANOOL IoT", is available for both Android (Google Play) and iOS (App Store).
- Scan the QR code provided in the manual or search for "BAANOOL IoT" in your app store to download the application.
- Open the app and register a new account if you haven't already, using the same process as the web platform.
- Log in to view your device's real-time location and manage its features.
Image: BAANOOL IOT Mobile App registration screen.
4. SMS Commands and Alarms
The tracker supports SMS commands for various functions, including arming/disarming and querying location. Refer to the full user manual (if available) for a complete list of SMS commands.
The device features several alarm types:
- Movement Alarm: Notifies you if the vehicle moves from its parked location.
- Geo-fence Alarm: Alerts you when the vehicle enters or exits a predefined geographical area.
- Vibration Alarm: Triggers an alert if the device detects significant vibration.
- SOS Alarm: Activated by pressing the connected SOS button, sending an emergency alert.
- Overspeed Alarm: Notifies you if the vehicle exceeds a set speed limit.
These alarms can be configured via the web platform or mobile app, and some can be armed/disarmed using the remote controller.
Maintenance
To ensure the longevity and optimal performance of your GPS Tracker 401D, follow these maintenance guidelines:
- Keep Dry: Although the device has an IP67 waterproof rating, avoid prolonged submersion in water. Ensure all covers (e.g., SIM card slot) are securely closed.
- Clean Gently: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or solvents.
- Temperature: Operate and store the device within the specified temperature ranges (-20°C to +45°C for operation, -40°C to +85°C for storage). Extreme temperatures can affect battery life and device performance.
- Power Supply: Ensure the power supply to the tracker is stable and within the 9-100V DC range.
- Software Updates: The device supports remote software upgrades. Periodically check the BAANOOL IOT platform or app for available updates to ensure you have the latest features and security patches.
Troubleshooting
If you encounter issues with your GPS Tracker 401D, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on | Incorrect wiring; no power supply; blown fuse. | Check all wiring connections according to the diagram. Verify vehicle's power supply. Check for any blown fuses in the vehicle's circuit or the tracker's wiring. |
| No GPS signal / Inaccurate location | Device in an area with poor satellite reception (e.g., indoors, underground); GPS antenna obstructed; device not initialized. | Move the vehicle to an open area with a clear view of the sky. Ensure the tracker is not covered by metal objects. Allow sufficient time for the device to acquire a GPS fix (up to 45 seconds for cold start). |
| No network connection / Cannot send SMS | SIM card not inserted correctly; SIM card inactive or no balance; incorrect APN settings; poor cellular coverage. | Reinsert the SIM card correctly. Verify the SIM card is active and has data/SMS credit. Check APN settings (usually configured automatically, but may need manual setup if issues persist). Move to an area with better cellular reception. |
| Web platform/App not showing data | Device not connected to network; incorrect login credentials; server issues. | Ensure the device has a stable network connection (see "No network connection" above). Double-check your login details. Contact BAANOOL support if the issue persists across multiple devices/accounts. |
| Remote controller not working | Remote battery low; remote out of range; device not paired with remote. | Replace the remote controller battery. Ensure you are within the effective range of the remote. Refer to the full manual for remote pairing instructions if necessary. |
User Tips
- Optimal Placement: For best GPS signal reception, install the tracker in a location with minimal metallic obstruction, ideally under the dashboard or a non-metallic part of the vehicle.
- Secure Wiring: After installation, double-check all wiring connections and use electrical tape or heat shrink tubing to secure and insulate them, especially in areas exposed to moisture or vibration.
- Regular Monitoring: Regularly check the device's status and location via the web platform or mobile app to ensure it is functioning correctly.
- Geo-fence for Security: Set up geo-fences around frequently visited locations (home, work) to receive immediate alerts if the vehicle moves unexpectedly.
- Battery Backup: The internal 90mAH Li-ion battery provides backup power. Ensure the main power supply is consistently connected to keep this battery charged.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact BAANOOL directly through their official website or the contact information provided with your purchase. Keep your purchase receipt and device IMEI number handy when contacting support.
Manufacturer: BAANOOL
Web Platform: www.baanool.net
