1. Introduction
Thank you for choosing the ISUDAR 12.3-inch Digital Instrument Cluster. This product is designed to upgrade your BMW's dashboard with advanced features and a modern display. It offers a seamless integration with your vehicle's existing systems, providing enhanced functionality and a superior driving experience.
This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure you get the most out of your new digital instrument cluster.
2. Compatibility
This digital instrument cluster is compatible with the following BMW 5 Series models:
- BMW 5 Series E60, E61, E63, E64 (2003-2009)
- BMW 5 Series E60 (2005-2008) with CCC system
- BMW 5 Series E60 (2009-2010) with CIC system
3. Key Features
- Plug and Play Installation: No coding or programming required.
- Original Mileage Retention: Your vehicle's original mileage will continue to be displayed.
- Enhanced Vehicle Information: 3D animation display for door and tire information. Fuel, speed, and fuel consumption data are clearly presented.
- High-Definition Display: 12.3-inch blue light anti-glare IPS screen with 1920x720 Ultra HD resolution.
- Steering Wheel Control: Full support for existing steering wheel controls.
- Built-in WiFi: Enables Over-The-Air (OTA) system updates for continuous improvement.
- Smartphone Integration: Supports Wireless CarPlay, Android Auto, Auto Link, and AirPlay.
- Multilingual Support: Available in English, Japanese, Korean, German, Russian, Spanish, Portuguese, French, Italian, Turkish, Polish, Romanian, and Arabic.
- Advanced Driving Data: Includes G-force display, Compass, Gyroscope (Upgraded Version), and GPS timing (Upgraded Version).
4. Version Differences
The ISUDAR Digital Instrument Cluster is available in two versions: Basic and Upgraded. Refer to the table below for key differences:
| Feature | Upgraded Version | Basic Version |
|---|---|---|
| UI Quantity | 11 sets (3 colors) | 4 sets (3 colors) |
| GPS Antenna | Included (supports GPS timing & compass) | Not included |
| Gyroscope | Supported (vehicle posture display) | Not supported |
| G-Force Display | Supported (car acceleration & center of gravity force) | Not supported |
5. Setup and Installation
The ISUDAR Digital Instrument Cluster is designed for a quick and easy 10-minute plug-and-play installation. No complex coding or programming is required. It offers a perfect structural match and fully data connection with your vehicle.
5.1. Accessory Kit
Ensure all components are present before beginning installation:
- Dashboard Unit
- Outer Frame
- GPS Antenna (for Upgraded Version only)
- Screwdriver
Image: Accessory Kit components.
5.2. Installation Steps
- Preparation: Turn off the vehicle and disconnect the battery for safety.
- Remove Original Cluster: Carefully remove the trim around your original instrument cluster. Unscrew and detach the old cluster from the dashboard.
- Connect New Cluster: Connect the wiring harness from the new digital cluster to the vehicle's existing connectors. Ensure all connections are secure.
- Install GPS Antenna (Upgraded Version): If you have the Upgraded Version, connect the GPS antenna and route it to a suitable location (e.g., under the dashboard or near the windshield) for optimal signal reception.
- Secure New Cluster: Place the new digital instrument cluster into the dashboard opening. Secure it with screws.
- Install Outer Frame: Attach the provided outer frame around the new cluster.
- Reassemble Trim: Reinstall any removed dashboard trim pieces.
- Reconnect Battery: Reconnect the vehicle battery.
- Test Functionality: Start the vehicle and verify that the new digital instrument cluster powers on and displays all information correctly.
For a visual guide, please refer to the installation video provided by the seller or the user manual PDF.
Image: Before and After installation comparison.
6. Operating Instructions
The digital instrument cluster integrates seamlessly with your vehicle's controls, primarily using the BC button on your steering wheel for navigation and selection.
6.1. Basic Navigation
Use the steering wheel controls to navigate through menus and select options. Short press the BC button to change values or cycle through options, and long press to switch menus or confirm selections.
6.2. Displaying Vehicle Functions
The cluster displays essential vehicle information, which may vary depending on the situation:
- Battery Voltage
- Oil Pressure
- Engine Temperature
- Real-Time Speed Meter
- Altitude
- Air Pressure
- Remaining Range & Fuel
- Switchable Miles/Kilometers
- Car Model Changeable
- Driving Mode
- Outside Temperature
Image: Overview of vehicle function display.
6.3. Advanced Functions (Upgraded Version)
- Compass: Guides direction at any time.
- Gyroscope: Displays body posture and balance.
- GPS Time: Precisely synchronizes real-time.
- G-Force: Shows car acceleration and center of gravity force.
Image: Advanced functions display.
6.4. Function Collection Overview
The cluster offers a wide range of functions:
Image: Visual representation of available functions.
6.5. UI and Vehicle Customization
- UI Styles: Choose from multiple UI sets (11 for Upgraded, 4 for Basic) with 3 color options (Orange, Blue, Red Series).
- Car Color Options: Select from 6 car color options to match your vehicle.
- Vehicle Model Customization: Customize the display of your car's model and name on the dashboard based on your vehicle series and model.
Image: UI and color customization.
Image: Vehicle model customization.
6.6. Wireless CarPlay / Android Auto
The cluster supports wireless CarPlay and Android Auto. To connect, ensure your phone's Bluetooth and Wi-Fi are enabled. Pair your phone with the cluster via Bluetooth, then follow the on-screen prompts to activate CarPlay or Android Auto.
Video: Demonstration of CarPlay/Android Auto connection and navigation.
6.7. System Settings (Using BC Button)
Navigate through the system settings using the BC button on your steering wheel. Short press to change values, long press to switch/confirm OK.
- Short Mileage Cleared: In 'TRIP Info', select 'Individual' and long press BC to reset.
- Maintenance Information: Access 'My Car' > 'Service' for maintenance details.
- Backlight Brightness: In 'System Settings' > 'General Settings', adjust 'Daytime Brightness' and 'Night Brightness'.
- Vehicle Color: In 'Vehicle Settings', select 'Vehicle color' and long press BC to switch.
- Background Color/Driving Mode: In 'Vehicle Settings', select 'Driving mode' and long press BC to switch.
- Overspeed Warning Switch: In 'System Settings' > 'General Settings', toggle 'SpeedWarnOnOff' and set 'Speed Alarm' value.
- Kilometer Setting: In 'Factory settings', adjust the kilometer value.
- Fuel Tank Capacity Setting: In 'Factory settings', adjust the fuel tank capacity.
- Vehicle Model Settings: In 'Factory settings', adjust the vehicle model.
- Mileage Unit: In 'System Settings' > 'Units', select 'Distance' to change the unit.
- Time Format Setting: In 'System Settings' > 'Date Time', select 'Time-Format' (e.g., 24H).
- Outside Temperature Unit: In 'System Settings' > 'Units', select 'Temperature' to change the unit.
- Car Door Display Reverse Setting: In 'Factory settings', adjust 'Rear door replacemen' or 'Front wheel replacem'.
- Fuel Tank Cap Direction Setting: In 'Factory settings', adjust 'Fuel Tank Position'.
- Version Information: In 'System Settings' > 'Version', view SN, App Ver, Plugins Ver, BT, and Protocol Ver.
- Maximum Speed per Hour/Rotational Speed Setting: In 'Factory settings', adjust 'Max Speed as 330 km' and 'Maximum speed 6000'.
- G-Force Calibration: In 'My Car' > 'G-Force Calibration', long press BC to reset.
- Right/Middle Information Settings: In 'Information Options', select 'Right/Middle information' to customize display options like 'Inst./Avg Fuel', 'Since Value', 'Gauge Information', 'G-Force Gauge'.
7. Maintenance
- Cleaning: Use a soft, lint-free cloth to clean the screen. Avoid abrasive cleaners or solvents that may damage the anti-glare coating.
- Software Updates: Regularly check for OTA (Over-The-Air) updates to ensure your system has the latest features and bug fixes. Connect to Wi-Fi and navigate to the system update section in settings.
- Environmental Conditions: Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.
8. Troubleshooting & FAQs
- No Audio: The unit does not have a built-in microphone or amplifier. Connect to your car's Bluetooth system to output audio.
- Car Model Display: The displayed car model is fixed and can only be changed in color on specific UI themes.
- Door Color: The car door animation color is fixed (black) regardless of whether the door is open or closed.
- Gaps After Installation: If there are small gaps after installation, gently tighten the screws. The frame is designed to be slightly malleable for easier installation.
- Third-Party Software Compatibility: Not all third-party vehicle detection software may be fully compatible. The unit is guaranteed to support factory information.
- Music Lists/Phone Books: Direct display of music lists or phone books on the cluster is not supported after installation.
- Touch Screen Functionality: The screen is not a touch screen. All controls are managed via the steering wheel buttons.
- Compatibility Check: To confirm compatibility with your specific vehicle, provide your car model, production year, and car number to the seller.
- Missing Installation Instructions: If you cannot find the installation video or user manual in the package, please contact the seller for assistance.
9. Specifications
| Attribute | Detail |
|---|---|
| Screen Size | 12.3 inches |
| Resolution | 1920 x 720 (Ultra HD) |
| Screen Type | IPS, Blue Light Anti-Glare |
| Material | Metal and Plastic |
| Item Weight | 1.6 kg |
| Special Features | CarPlay, G-force, OTA Update, Compass |
| Placement on Vehicle | Dashboard |
| Country/Region of Manufacture | China |
| Package Dimensions (L x W x H) | 41cm x 23cm x 23cm |
10. User Tips
- Many users have found the installation process straightforward and are very satisfied with the upgraded look and functionality.
- The device supports both Android Auto and Head-up Display (HUD), enhancing navigation and driver information.
- If you encounter any minor issues, the seller is generally responsive and helpful in resolving them.
11. Warranty and Support
11.1. Warranty
This product comes with a 2-year warranty from the date of purchase.
11.2. Technical Support
For any questions or technical assistance, please contact our support team:
- Email: victor@isudar.com
You can also refer to the official user manual PDF for more detailed information: ISUDAR Digital Instrument Cluster User Manual (PDF)
Manufacturer: Shenzhenshi Xinyingli Technology Co., Ltd.
Importer: OPBC GmbH