1. Product Overview
The Baofeng UV-21 PRO V2 is a versatile multi-band amateur radio designed for reliable two-way communication. It features a 1.77-inch color display, a wide frequency range, and various advanced functions to enhance your communication experience.


2. Setup and Assembly
Follow these steps to set up your Baofeng UV-21 PRO V2 radio for first use.
- Unboxing: Carefully remove all components from the packaging. The package should contain the radio body, Li-ion battery pack, SMA-Female dual band antenna, desktop charger with adapter, USB-C charging cable, belt clip, handstrap, and an English manual.
- Battery Installation: Insert the 7.4V 1800mAh Li-ion battery pack into the back of the radio body, ensuring it clicks securely into place.
- Antenna Attachment: Screw the SMA-Female dual band antenna onto the antenna connector at the top of the radio until it is finger-tight.
- Belt Clip Attachment: Attach the belt clip to the back of the radio using the provided screws and a screwdriver.
- Initial Charging: Before first use, fully charge the battery. You can use the desktop charger or the USB-C charging cable.

3. Operating Instructions
This section details the various functions and how to operate your Baofeng UV-21 PRO V2 radio.
3.1 Basic Operation
- Power On/Off: Rotate the power/volume knob clockwise to turn on the radio. Rotate counter-clockwise until it clicks to turn off.
- Volume Adjustment: Rotate the power/volume knob to adjust the audio level.
- Frequency/Channel Selection: Use the keypad to directly input frequencies or navigate through channels using the up/down arrow buttons. The 1.77" TFT color screen displays current frequency and channel information.
- PTT Button: Press and hold the Push-To-Talk (PTT) button on the side of the radio to transmit. Release to receive.

3.2 Advanced Functions
- Multi-Band Operation: The radio supports a wide range of frequencies including FM (65-108MHz for commercial radio), AM (108-136MHz for air band receive), VHF (136-174MHz, 200-260MHz), and UHF (350-390MHz, 400-480MHz, 480-520MHz).
- 999 Memory Channels: Store up to 999 channels for quick access to your most used frequencies.
- Wireless Copy Frequency: Easily copy a channel's frequency from another radio wirelessly.
- Scrambler: Activate the scrambler function for enhanced privacy during transmissions.
- VOX Function: Voice-operated transmission allows hands-free communication. Adjust VOX sensitivity in the menu.
- Scanning: The radio supports Channel Scan, Frequency Scan, and CTCSS/DCS Scan with three recovery methods: Time-Operated (TO), Carrier-Operated (CO), and Search-Operated (SE).
- NOAA Weather Broadcast: Access U.S.A/CA NOAA Weather Broadcast channels for real-time weather updates.
- Repeater Offset Programmable: Configure repeater offsets for extended range communication.
- DTMF Encoder and Manual Dial: Use DTMF tones for various control functions or manual dialing.
- 1000/1450/1750/2100Hz Tone: Access various tones for repeater access or selective calling.
- Roger Beep: An audible tone indicating the end of your transmission.
- Dual Watch/Dual Reception/Dual Band: Monitor two frequencies simultaneously.
- Stopwatch Function: Built-in stopwatch for timing activities.
- High Illumination Flashlight: Use the integrated flashlight for illumination in low-light conditions.












4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your radio.
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
- Battery Care: Store the battery in a cool, dry place when not in use. Avoid overcharging or completely draining the battery frequently to prolong its lifespan.
- Antenna Care: Ensure the antenna is securely attached. Avoid bending or forcing the antenna, as this can damage the connector.
- Environmental Protection: Keep the radio away from extreme temperatures, direct sunlight, dust, and moisture. The radio is not waterproof.
5. Troubleshooting
If you encounter issues with your radio, refer to the following common problems and solutions.
- Radio not transmitting signal:
- Check if the battery is sufficiently charged.
- Ensure the antenna is properly connected.
- Verify that you are on a valid transmit frequency and that the power output is set correctly.
- Check for any activated functions like Scrambler or VOX that might interfere with normal transmission if not configured correctly.
- No audio or weak audio:
- Adjust the volume knob.
- Check the squelch level (SQL) in the menu. A high squelch level might block weak signals.
- Ensure no external audio accessories are connected or that they are functioning correctly.
- Display not working:
- Ensure the radio is powered on and the battery is charged.
- If the issue persists, try resetting the radio (refer to the full English manual for reset procedures).
6. Specifications
Detailed technical specifications for the Baofeng UV-21 PRO V2 radio.

| Attribute | Value |
|---|---|
| Channel Capacity | 999 |
| Channel Spacing | 25.0KHz/12.5KHz |
| Input Voltage | 7.4VDC |
| Current Drain: Standby | 45mA |
| Current Drain: Receive | 380mA |
| Current Drain: Transmit | ≤1.6A (High power), ≤1.2A (Low power) |
| Operating Temperature | -10°C to 60°C |
| Antenna Impedance | 50 ohm |
| Radio Dimensions | 147mm*53mm*35mm (Antenna Not included) |
| Radio weight | 260g (with Li-ON battery) |
| Output Power(w) | 3w-5w |
| Battery Capacity(mAh) | 1800 |
| Waterproof / Water-Resistant | No |
| Material | Plastic |
| Is_Display | Yes |
| Maximum Range | 3km-5km |
| Origin | Mainland China |
| Certification | CE, FCC |
| Attribute | Value |
|---|---|
| Frequency Range (TX) | 136-174MHz & 220-260MHz & 400-480MHz |
| RF Output Power | 5 Watt |
| Modulation | 16K ΦF3E/11K ΦF3E |
| Spurious Emission | -16dBm < 1GHz, -16dBm > 1GHz |
| Frequency Stability | ±2.5ppm |
| Audio Distortion | ≤5% |
| FM Hum & Noise | 40dB |
| Attribute | Value |
|---|---|
| Frequency Range (RX) | FM: 65-108MHz (RX) AM: 108-135.99750MHz (RX) VHF1: 136-174MHz (RX) VHF2: 200-260MHz VHF3: 350-390MHz UHF: 400-520MHz |
| Sensitivity: 12dB SINAD | -120dBM |
| Adjacent Channel Selectivity | -60dBm |
| Intermodulation and rejection | -70dBm |
| Rated Audio Power Output | 0.75 Watts 16ohm |
| Rated Audio Distortion | ≤5% |
Note: All specifications are subject to change without prior notice.
7. User Tips
Here are some helpful tips from other users to enhance your experience with the Baofeng UV-21 PRO V2:
- Explore the Menu: The radio has a rich menu system. Take time to explore all settings to customize it to your preferences.
- Channel Memory: Utilize the 999 memory channels to save frequently used frequencies for quick access, especially for local repeaters or emergency channels.
- Battery Life: To maximize battery life, consider using the low power output setting when communicating over short distances.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official Baofeng website. Keep your purchase receipt as proof of purchase.