Dongcheng DCMY165

Contents

Dongcheng DCMY165 Cordless Circular Saw User Manual

Model: DCMY165

1. Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Dongcheng DCMY165 Cordless Circular Saw. Please read this manual thoroughly before using the tool and keep it for future reference.

The Dongcheng DCMY165 is a powerful 20V brushless cordless circular saw designed for cutting wood and various board materials. It features adjustable cutting depth and angle for versatile applications.

2. Safety Instructions

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools.

  • Wear appropriate personal protective equipment (PPE): Always wear safety glasses, hearing protection, and gloves. A dust mask is recommended when cutting wood.
  • Keep work area clean and well-lit: Cluttered or dark areas invite accidents.
  • Secure workpiece: Always clamp or otherwise secure the material being cut to prevent movement during operation.
  • Avoid accidental starting: Ensure the switch is in the off-position before inserting the battery pack, picking up or carrying the tool. The tool is equipped with a protection switch to prevent false starts.
  • Maintain proper footing and balance: Do not overreach. Proper footing and balance enable better control of the power tool in unexpected situations.
  • Use the right tool for the job: Do not force the tool. It will do the job better and safer at the rate for which it was designed.
  • Inspect the blade: Before each use, check the saw blade for sharpness, cracks, or damage. Replace damaged blades immediately.
  • Keep hands away from cutting area: Never reach under the workpiece or near the rotating blade.

3. Product Components

Familiarize yourself with the main parts of your circular saw:

  • Motor Housing (Brushless)
  • Handle with Protection Switch
  • Base Plate / Shoe
  • Blade Guard
  • Depth Adjustment Lever
  • Angle Adjustment Lever
  • Spindle Lock Button
  • Saw Blade
  • Guide Ruler
  • Battery Pack (sold separately for bare tool models)
Dongcheng DCMY165 Cordless Circular Saw with key specifications

Figure 1: Overview of the DCMY165 Cordless Circular Saw.

4. Setup and Assembly

4.1 Installing/Removing the Saw Blade

  1. Ensure the battery pack is removed from the tool.
  2. Press and hold the spindle lock button (often located near the blade housing).
  3. Using the provided wrench, loosen the arbor bolt by turning it counter-clockwise.
  4. Remove the outer washer and the old saw blade.
  5. Clean the inner and outer washers and the arbor.
  6. Place the new saw blade onto the arbor, ensuring the teeth are pointing in the direction of rotation indicated by the arrow on the blade guard.
  7. Replace the outer washer and tighten the arbor bolt securely by turning it clockwise with the wrench while holding the spindle lock button.

Video 1: Demonstration of blade installation and cutting operations.

Close-up of blade installation process

Figure 2: Detailed view of securing the saw blade.

4.2 Adjusting Cutting Depth

The cutting depth can be adjusted from 0mm to 59mm to match the thickness of your workpiece.

  1. Loosen the depth adjustment lever.
  2. Raise or lower the saw base to the desired cutting depth.
  3. Tighten the depth adjustment lever firmly to secure the setting.
Diagram showing adjustable cutting depth from 0-59mm

Figure 3: Illustration of the cutting depth adjustment mechanism.

4.3 Adjusting Cutting Angle (Bevel)

The saw allows for angle adjustments from 0 to 50 degrees for bevel cuts.

  1. Loosen the angle adjustment lever.
  2. Tilt the saw base to the desired angle (0-50 degrees).
  3. Tighten the angle adjustment lever firmly to secure the setting.
Diagram showing adjustable cutting angle from 0-50 degrees

Figure 4: Illustration of the cutting angle adjustment mechanism.

4.4 Attaching the Guide Ruler

For straight and precise cuts, attach the guide ruler to the saw base.

  1. Slide the guide ruler into the slot on the saw base.
  2. Adjust the ruler to the desired measurement for your cut.
  3. Tighten the locking screw to secure the guide ruler in place.
Close-up of the guide ruler attachment for precise cuts

Figure 5: Detail of the guide ruler for operation and observation.

5. Operating Instructions

Before starting, ensure all adjustments are secure and the battery is fully charged.

  1. Power On: Press the protection switch (safety lock) and then squeeze the trigger switch to start the saw. The protection switch prevents accidental starting.
  2. Cutting:
    • Place the front edge of the saw's base plate on the workpiece, ensuring the blade is not touching the material.
    • Start the saw and allow the blade to reach full speed.
    • Slowly guide the saw into the workpiece, maintaining a steady and controlled pace.
    • For straight cuts, use the guide ruler or a straight edge.
    • For bevel cuts, ensure the angle is set correctly before starting.
  3. Power Off: Release the trigger switch to stop the saw.
Close-up of the protection switch on the saw handle

Figure 6: The protection switch helps prevent false starts.

User operating the DCMY165 circular saw to cut wood

Figure 7: Proper grip and operation of the DCMY165 during cutting.

6. Maintenance

Regular maintenance ensures optimal performance and extends the life of your tool.

  • Cleaning: After each use, clean the tool with a soft, dry cloth. Remove any sawdust or debris from the blade guard, motor vents, and base plate. Do not use harsh chemicals or abrasive cleaners.
  • Blade Inspection: Periodically inspect the saw blade for wear, damage, or dullness. Replace worn or damaged blades promptly.
  • Battery Care: Store battery packs in a cool, dry place away from direct sunlight. Do not expose batteries to extreme temperatures. Follow the battery manufacturer's instructions for charging and storage.
  • General Inspection: Check all screws and fasteners for tightness. Tighten any loose components.

7. Troubleshooting

If you encounter issues with your circular saw, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Saw does not startBattery not charged or improperly inserted; Protection switch not engaged; Faulty switch.Ensure battery is charged and correctly inserted. Press the protection switch before the trigger. If problem persists, contact support.
Poor cutting performance / Rough cutsDull or damaged blade; Incorrect blade for material; Improper cutting depth/angle; Forcing the saw.Replace with a sharp, appropriate blade. Adjust cutting depth and angle. Allow the saw to work at its own pace.
Excessive vibrationLoose blade; Damaged blade; Loose components.Check blade for proper installation and damage. Tighten any loose parts.

8. Specifications

FeatureSpecification
Model NumberDCMY165
Brand NameDongcheng
Saw TypeCircular Saw
Motor TypeBrushless
Power SourceDC (Cordless)
Rated Voltage20V
No-Load Speed5000rpm
Blade Diameter165x20mm
Max. Cutting Depth (90°)59mm
Max. Cutting Depth (45°)43mm
Max. Cutting Depth (50°)39mm
Angle Adjustment0-50 Degrees
Weight (bare tool)3.1Kg
CertificationCE
OriginMainland China
ApplicationWood Saw (Commercial Manufacture Use)

Note: The "Frequency: 50/60HZ" specification is typically for AC-powered tools. As this is a DC cordless tool, this specification may refer to the charger or general product line information and is not directly applicable to the tool's operation.

DCMY165-9 bare tool package showing saw, blade, and wrench

Figure 8: Example of a bare tool package (No Battery and Charger included).

9. User Tips

  • For optimal battery life and performance, always use genuine Dongcheng 20V battery packs and chargers.
  • When making long cuts, ensure your guide ruler or straight edge is securely clamped to prevent deviation.
  • Allow the saw to cool down during extended use to prevent overheating and prolong motor life.
  • Keep the blade sharp; a dull blade can cause kickback and strain the motor.

10. Warranty and Support

For warranty information, service, or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.