FIREBAT R3 Mini PC User Manual

1. Important Information

Disclaimer

• Please use the original power supply. The company is not responsible for problems or failures caused by third-party adapters.
• Users may use third-party music videos, pictures, and software, but the company is not responsible for copyright issues or software failures.
• In case of product failure, the company will adhere to warranty terms but is not responsible for property damage or economic loss during use.
• The device comes with built-in software, tested for functionality. Deleting or not deleting software for compatibility or other issues does not affect the machine and is not a product quality issue.
• The company reserves the right to improve the product. Specifications and design are subject to change without prior notice. Refer to the actual product.

General Notes

• Be careful when performing operations that may cause file damage or loss.
• Use antivirus protection and a firewall.
• Turn off and disconnect power when the mini PC is not used for a long time.
• Avoid frequently turning the mini PC on and off. Allow at least 10 seconds, preferably 60 seconds, between starts.
• Keep the environment clean and sterile. Wipe dust with a dry soft cloth.
• Avoid direct strong light and strong magnetic fields.
• Do not drop liquids or food on the mini PC, and do not pull data or power cables.

2. Product Overview

The FIREBAT R3 Mini PC is a compact desktop computer designed for various uses, from multimedia to office tasks. It features AMD Ryzen processors, LPDDR4 RAM, and an SSD for fast performance.

Figure 2.1: Top view of the FIREBAT R3 Mini PC.

Figure 2.2: Front view showing USB-C, USB-A 3.2 Gen2, and Audio ports.

Figure 2.3: Rear view showing HDMI, DP 1.4, LAN, USB-A 3.0, and DC power input.

Packing List

3. Setup

Quick Installation

1. Connect the display device (monitor, TV) via HDMI, DP, or Type-C cable.
2. Connect the DC power adapter to the mini PC and a power outlet.
3. Connect your keyboard and mouse (self-provided) via the USB interface.
4. Connect to the Internet via an Ethernet cable or Wi-Fi. Note: Wi-Fi needs to be set up after turning on the device.

Figure 3.1: Diagram illustrating the quick installation steps.

VESA Bracket Installation

Some models include a standing bracket instead of a VESA mount bracket. Refer to the actual product for specific instructions.

Figure 3.2: VESA bracket installation for mounting the Mini PC behind a monitor.

4. Operating Instructions

How to Start

When starting your mini PC for the first time, the system will guide you through the Windows operating system configuration.

a. Power On

Press the power button to start your mini computer. Wait several minutes for the first startup until the installation interface appears.

1. Select Language/Country (Region).
2. Select "Input Method" and click "Confirm".
3. Select the second input method (you can "skip").
4. Network: Enter the password to connect after selecting WiFi, or plug in an Ethernet cable. The network will automatically update, which can extend startup time. It is strongly recommended to skip the network connection during initial setup.
5. Accept the License Agreement.
6. Set Username and Password. The desktop will appear after installation.

b. Connect to WiFi

Select the WiFi icon () from the taskbar to turn on Wi-Fi. Select an access point from the list of available Wi-Fi connections to start the network connection. You may be prompted to enter a security key.

c. Enter BIOS Setup

BIOS (Basic Input/Output System) is the first software loaded when the Mini PC starts. To enter BIOS, click the "Del" or "F2" key during startup. Default BIOS settings are usually optimal. Do not change default BIOS settings unless new system components require further setup or a BIOS update. Inappropriate BIOS settings may cause instability or failure to start. It is strongly recommended to change BIOS settings only with the help of technical service personnel.

5. Specifications

The FIREBAT R3 Mini PC offers robust performance in a compact form factor. Key specifications include:

• Processor: AMD Ryzen3 /5/7 (e.g., AMD Ryzen3 4300U, AMD Ryzen5 7430U, AMD Ryzen7 7730U)
• Memory Capacity: 16 GB LPDDR4 RAM
• Hard Drive Capacity: 512GB SATA SSD (with two M.2 SSD slots, one NVMe/SATA compatible, expandable up to 2 TB)
• Graphics Card Type: Integrated Card (Intel UHD Graphics)
• Type: Mini Desktop / Mini PC
• Use: Multimedia
• Connectivity: WiFi6, BT5.2
• Ports: USB-C, USB-A 3.2 Gen2, USB-A 3.0, Audio, HDMI, DP 1.4, LAN, DC power input
• Operating System: Windows 11
• Certification: CE, FCC, RoHS
• Origin: Mainland China

Figure 5.1: Internal view of the Mini PC, highlighting the M.2 SSD slot for flexible memory expansion.

6. Troubleshooting

Common Issues and Solutions

Q1: Why can't the machine be turned on?

A1: First, confirm the machine is connected to the original power supply. If the power light is off and the machine is unresponsive, disassemble it (refer to disassembly video steps), unplug and replug the power cable on the motherboard, then try to turn it on again. If the issue persists, contact the FIREBAT team.

Q2: Why is the fan working and the light on, but it can't be turned on?

A2: This usually indicates a system problem preventing normal boot. Try unplugging and replugging the hard disk. For non-onboard machines, try unplugging and replugging the memory stick. If it still doesn't boot, download the image system from the FIREBAT official website and reinstall it.

Q3: How to solve a blue screen crash?

A3: Blue screens are often caused by driver incompatibility. Check the blue screen code to identify the incompatible driver. After entering the desktop, uninstall the driver and download the factory driver from the FIREBAT official website, or reinstall the system.

Q4: Why is the network slow or Wi-Fi connection keeps disconnecting?

A4: a. Check if it's a router issue or low bandwidth. Improve the network environment or increase bandwidth. Being too far from Wi-Fi or through a wall can weaken the signal; move the device closer to the signal source. b. Uninstall and reinstall the network card driver. c. If network and driver are fine, poor Wi-Fi contact might be the cause. Disassemble the machine and unplug the wires on the Wi-Fi network card.

Q5: How to change the operating system?

A5: Insert a U disk, press "Del" or "F2" to enter BIOS, select "startup", then "boot", and press "Enter" to enter the system priority boot menu. Set the U disk as the priority boot, then enter and save. (Note: Only pre-installed systems are supported for maintenance.)

Q6: Why can't the USB port be used?

A6: If USB ports are not working after booting, shut down the computer. Press and hold the power button for 30 seconds, repeat 3 times to discharge static electricity, then wait five minutes before turning on. If the issue persists, contact the FIREBAT team.

Q7: Why is it stuck in "Windows Preparing Automatic Repair"?

A7: This is usually due to internal system problems. a. Wait patiently for the repair to complete. b. If repair fails, download and reinstall the image system from the official website. c. Unplug the hard disk. If the issue persists, reinstall the system. For blue screen errors during automatic repair, disassemble and unplug the hard disk. If the blue screen persists, download and reinstall the image system from the official website.

Q8: How to solve video playback lag?

A8: a. Check for limited network speed or issues with the video website's transmission bit rate. b. If the computer is not under high load but keeps freezing, reinstall the system. If it still doesn't work, contact the FIREBAT team.

Q9: Why does the computer get very hot?

A9: Overheating can occur during high-load operation. It's normal for prolonged high-load use. Clean the cooling system (fan silicone grease) and improve cooling (e.g., using an external fan). Optimize processes and close unnecessary software to free up RAM.

Q10: How to fix the display not waking up after sleep?

A10: a. Open Device Manager, right-click the mouse, select "Properties", then "Power Management", and check "Allow the mouse to wake up the machine". b. Return to the previous level, right-click "Keyboard Property Management", then "Power Management", and check "Allow the keyboard to wake up the machine".

Q11: Why doesn't the computer reach the described pulse frequency?

A11: When idle, the CPU runs at its lowest frequency to save power. When working, the CPU speed gradually increases. Right-click the taskbar to open "Task Manager", switch to "Performance", and observe CPU status.

Q12: What to do if the mini-computer cannot shut down?

A12: Press and hold the power button for at least 4-6 seconds until your mini computer shuts down.

7. Maintenance

Cleaning and Maintenance

1. Turn off the product and unplug the power adapter before cleaning.
2. Wipe the product housing with a wet towel, avoiding interfaces and electrical components, then wipe it dry with a soft cloth. Do not use corrosive cleaning fluids.
3. Do not immerse the product in water or other liquids.
4. After cleaning, place it in a dry and ventilated environment to dry thoroughly before use or storage.

8. Warranty and Support

Warranty

We provide a one-year product quality warranty from the date of purchase and free lifetime product technical support. For normal faults or quality problems within the warranty period, we offer free replacement or repair services. For damage caused by manual operation, the cost of product parts for repair will be charged. Our technical support team is available 24 hours a day. If you encounter any problems during use, please feel free to contact us.

Contact Information

• Email: support@firebatpc.com
• Website: www.firebatpc.com
• Facebook: Firebat

9. User Tips

• For optimal performance, ensure your Mini PC has adequate ventilation and is not placed in an enclosed space.
• Regularly check for and install system updates to keep your Windows operating system secure and efficient.
• If experiencing slow network speeds, try connecting via an Ethernet cable for a more stable and faster connection.
• When troubleshooting, always start with the simplest solutions, such as checking power connections and restarting the device.

10. Product Video

Watch this video for an unboxing and overview of the FIREBAT R3 Mini PC, demonstrating its components and initial setup.