1. Setup Guide
This section will guide you through the initial setup of your A4tech G10-810 Air2 Wireless Mouse.
1.1 Package Contents
- A4tech G10-810 Air2 Wireless Mouse
- USB Receiver
- Type-C Adapter
1.2 Battery Installation
The mouse requires one No.5 battery (AA battery), which is not included in the package.
- Locate the battery compartment on the underside of the mouse.
- Open the battery compartment cover.
- Insert one No.5 (AA) battery, ensuring correct polarity (+/-).
- Close the battery compartment cover.
1.3 Connecting the Mouse
The A4tech G10-810 Air2 mouse uses a 2.4G wireless connection.
- Insert the USB Receiver: Plug the USB receiver into an available USB port on your computer.
- Using the Type-C Adapter (if needed): If your computer only has Type-C ports, connect the USB receiver to the provided Type-C adapter, then plug the adapter into a Type-C port on your computer.
- Power On: Locate the ON/OFF switch on the underside of the mouse and slide it to the 'ON' position.
- Your computer should automatically detect and install the necessary drivers.

Figure 1: USB Receiver and Type-C Adapter Connection Options

Figure 2: Mouse ON/OFF Switch Location
1.4 System Requirements
The mouse is compatible with Windows 7, Windows 8, Windows 8.1, Windows 10, and Windows 11 operating systems.
2. Operating Instructions
The A4tech G10-810 Air2 features dual-purpose operation for both desktop and 'Air' (over-the-air) use, offering enhanced multimedia control.
2.1 Desktop Use (Standard Features)
When the mouse is on a flat surface, it functions as a standard wireless mouse. The buttons perform their default actions:
- Left Click: Primary action.
- Right Click: Context menu.
- Scroll Wheel: Scroll up/down pages.
- Side Buttons: Typically for forward/backward navigation in browsers.
2.2 Air Operation (Multimedia Functions)
The mouse can be lifted off the surface to activate 'Air' mode, enabling multimedia control.

Figure 3: Air Desktop Dual-Purpose Operation
2.2.1 Enabling Multimedia Functions
To enable multimedia functions in Air mode:
- Lift the mouse off the surface.
- Long press the Left Button and the Right Button simultaneously for 5 seconds.
2.2.2 Air Mode Button Functions
Once multimedia functions are enabled in Air mode, the buttons perform the following actions:
- Scroll Wheel Up: Turn up the volume.
- Middle Key Wheel (Press): Mute/unmute music.
- Scroll Wheel Down: Turn down the volume.
- Right Mouse Button: Play/Pause media.
- Shift Key (Button 3, typically below scroll wheel): Open multi-media player.

Figure 4: Air Operation Function Details
2.3 DPI Adjustment (Optical Resolution)
The mouse supports four-stage speed regulation (DPI adjustment) to suit different display screens and tasks.
- Use the Shift Key (Button 3) to cycle through DPI settings: 1000 DPI, 1200 DPI, 1600 DPI, and 2000 DPI.

Figure 5: DPI Settings for Different Tasks
2.4 Anti-Sleep Function
To toggle the anti-sleep function:
- Lift the mouse.
- Long press the Left Button for 3 seconds. This will open or turn off the anti-sleep function.
2.5 Personalized Functions (One Key 8 Carving)
The mouse supports personalized functions for improved efficiency. To utilize these, you may need to download and install the official driver software.
- Download the driver from: www.a4tech.cn/driver
- Install the driver on your Windows 10/11 system.
- Hold down the right button and move the mouse in the direction of the arrow (as indicated in the software) to set up 8 kinds of personalized optional functions.
2.5.1 Screenshot Function
The driver software also enables a screenshot function (supports Windows 10/11 system platform only).
- Press the dedicated screenshot key (if configured).
- Select the screenshot method (e.g., rectangular, any, window, full screen).
- Pull the area to be captured with the left key.
- Save the screenshot to the clipboard or a file.

Figure 6: Driver Software and Screenshot Functions
3. Maintenance
Proper maintenance ensures the longevity and optimal performance of your wireless mouse.
3.1 Cleaning
- Use a soft, dry cloth to wipe the exterior of the mouse.
- For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Avoid harsh chemicals.
- Do not allow liquids to enter the mouse.
- Clean the optical sensor periodically with a cotton swab to ensure accurate tracking.
3.2 Power Saving
The mouse is designed with power-saving features:
- It automatically enters different levels of power-saving mode after 0.2 seconds of rest.
- For extended periods of non-use (e.g., travel or storage), slide the ON/OFF switch on the underside of the mouse to the 'OFF' position to conserve battery life.

Figure 7: Power Saving Mode Indication
4. Troubleshooting
If you encounter issues with your A4tech G10-810 Air2 mouse, try the following troubleshooting steps:
4.1 Connectivity Issues
- Check Battery: Ensure the battery is correctly installed and has sufficient charge. Replace if necessary.
- Power Switch: Make sure the ON/OFF switch on the mouse is in the 'ON' position.
- Receiver Connection: Ensure the USB receiver (or Type-C adapter with receiver) is securely plugged into a working USB port on your computer. Try a different USB port.
- Re-pair: If the connection is lost, try unplugging and re-plugging the USB receiver. The mouse should automatically re-establish connection.
- Interference: Move the mouse closer to the receiver. Avoid using the mouse near other wireless devices that might cause interference.
4.2 Cursor Movement Issues
- Clean Sensor: Clean the optical sensor on the underside of the mouse to remove any dust or debris.
- Surface: Ensure you are using the mouse on a suitable surface. Highly reflective or uneven surfaces can affect tracking.
- DPI Setting: Adjust the DPI setting using the Shift Key (Button 3) to see if a different sensitivity resolves the issue.
4.3 Button Functionality Issues
- Driver Software: For advanced or personalized functions, ensure the A4tech driver software is installed and up-to-date.
- Air Mode Activation: If multimedia functions are not working in Air mode, ensure you have correctly enabled them by long-pressing the Left and Right buttons for 5 seconds while the mouse is lifted.
5. Specifications
| Feature | Specification |
|---|---|
| Brand | A4tech |
| Model | G10-810 Air2 (Internal Model: G10-810F) |
| Type | 2.4Ghz Wireless Mouse |
| Interface Type | USB (for receiver) |
| Power Type | Battery (1x AA / No.5 battery) |
| Battery Included | No |
| Number of Buttons | 7 |
| Number of Rollers | 1 |
| Hand Orientation | Right |
| Operation Mode | Opto-electronic |
| Optical Resolution | 2000 DPI (Adjustable: 1000-1200-1600-2000 DPI) |
| Wireless Distance | Up to 10 meters |
| Certification | CE |
| Package Type | Official standard configuration |
| High-concerned chemical | None |
| System Requirements | Windows 7/8/8.1/10/11 |
| Dimensions (L x W x H) | 24 cm x 14 cm x 6 cm (approximate package dimensions) |
| Weight | 0.256 kg (approximate package weight) |
6. User Tips
Maximize your experience with the A4tech G10-810 Air2 mouse with these helpful tips:
- Silent Operation: The mouse features comfortable mute buttons, making it ideal for quiet environments like libraries, offices, or dormitories.
- Versatile Use: Take advantage of the dual-purpose operation. Use it on your desk for precise work and lift it for multimedia control during presentations or casual browsing.
- Type-C Convenience: If you have a modern laptop or tablet with Type-C ports, remember to use the included Type-C adapter for seamless connectivity.
- Battery Conservation: Always switch the mouse to the 'OFF' position using the underside switch when not in use for extended periods to prolong battery life.
- Customize Your Experience: Download the official A4tech driver software to unlock and customize the 8 personalized functions and the convenient screenshot feature.
7. Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or contact the seller directly. A4tech products typically come with a manufacturer's warranty covering defects in materials and workmanship.
7.1 Driver and Software Support
Official drivers and software for enhanced functionality can be downloaded from the A4tech website:
Ensure you download the correct driver for your specific model (G10-810 Air2 / G10-810F) and operating system.