FLYDIGI B7, B8X

Contents

Flydigi B7/B8X Cooling Fan User Manual

Smart Frequency High-Efficiency Cooling Silent RGB Radiator for iOS, Android Phones & Tablets

1. Product Overview

The Flydigi B7 and B8X are advanced cooling fans designed to maintain optimal device temperature during intensive use, such as gaming or video streaming. Featuring intelligent frequency conversion and high-efficiency cooling, these radiators prevent overheating and condensation, ensuring stable performance and device longevity.

Flydigi B7/B8X Cooling Fan with RGB lighting

Flydigi B7/B8X Cooling Fan with RGB lighting, showcasing its compact design and cooling fins.

Key Features:

  • 27W Intelligent Frequency Conversion: Provides powerful and efficient cooling, automatically adjusting power based on device load.
  • FlyOC™ Inverter Temperature Control 3.0: Maintains device temperature around 25°C, effectively preventing condensation.
  • Innovative Air Suction Architecture: Inhales wind from all sides and exhausts hot air from the back, preventing heat from blowing onto your hands.
  • Ultra-Low Noise Operation: Operates at <35dB, ensuring a quiet user experience.
  • RGB Lighting (B7X) / Single Color Lighting (B7): Visualizes frequency conversion with dynamic lighting effects.
  • Compatibility: Supports iOS (iPhone 12 and above directly) and Android phones/tablets (with magnetic patch).

2. Package Contents

Please check the package for the following items:

  • Flydigi B7 or B8X Cooling Fan
  • USB Type-C to Type-C Cable
  • Magnetic Patch (for B8X/B7X, for use with non-iPhone 12+ devices)
  • User Manual (this document)

3. Setup Instructions

3.1 Power Requirements

  • The cooling fan requires a 30W or higher fast charger for full-power operation.
  • Ensure your charger supports the PD fast charging protocol for optimal performance.
  • Connect the cooling fan to the power source using the provided USB Type-C cable.
Fast charger requirement for Flydigi cooler

Image illustrating the requirement for a 30W or higher fast charger.

3.2 Attaching the Cooler to Your Device

For B7 (Back Clip Type):

  • The B7 model is a back clip type, designed for smartphones between 5.8 and 6.7 inches.
  • Gently extend the clip and attach it securely to the back of your smartphone, ensuring it does not obstruct cameras or buttons.
Flydigi B7 cooler with clip attachment

Flydigi B7 cooler, a back clip type, compatible with 5.8-6.7 inch phones.

For B8X/B7X (Magnetic Type):

  • iPhone 12 and above: The B8X/B7X can directly adhere magnetically to the back of your iPhone 12 or newer models. Ensure the phone surface is clean for optimal magnetic attachment.
  • Android Phones/Tablets & Other Devices: For devices without built-in magnetic attachment, use the complimentary magnetic patch.
  • Applying the Magnetic Patch: Clean the back surface of your device. Peel off the protective film from the magnetic patch and firmly press it onto the desired cooling area on your device. Allow it to set for a few minutes before attaching the cooler.
Magnetic attachment for Flydigi B8X/B7X cooler

Image demonstrating magnetic attachment for iPhone 12+ and magnetic patch use for Android/tablets.

4. Operating Instructions

4.1 Power On/Off

  • Locate the button power switch on the cooling fan.
  • Press the button to turn the cooler on. The lighting effects will activate.
  • Press the button again to turn the cooler off.

4.2 Intelligent Cooling Modes

The Flydigi cooler features intelligent frequency conversion, automatically adjusting its power output to optimize cooling and prevent overcooling and condensation.

  • Low Load Scenarios: When performing less demanding tasks (e.g., watching videos, browsing), the cooler automatically switches between 10-27W, displaying colorful lighting effects.
  • High Load Scenarios: During intense activities like gaming, the cooler maintains full 27W power operation, accompanied by warm color lighting effects.
Flydigi cooler low and high load modes

Illustration of low load (colorful lighting, 10-27W) and high load (warm lighting, full 27W) operation.

4.3 APP Smart Hub (B8X/B7X)

For advanced control and monitoring, the B8X (and likely B7X) model can be connected to the Flydigi Game Center APP.

  • Download the Flydigi Game Center APP from your device's app store.
  • Pair your cooling fan with the APP.
  • Through the APP, you can adjust settings such as target temperature, fan speed, and lighting effects.
Flydigi APP smart hub interface

Screenshot of the Flydigi APP interface for smart control of the cooler.

5. Maintenance

  • Cleaning: Regularly check and gently clean the air intake and exhaust vents to prevent dust buildup, which can affect cooling performance and noise levels. Use a soft, dry cloth or a small brush.
  • Storage: When not in use, store the cooling fan in a cool, dry place away from direct sunlight and extreme temperatures.
  • Water Ingress Protection: The innovative cold and hot isolation structure is designed to prevent water ingress into the circuit board, enhancing durability. However, avoid exposing the device to excessive moisture or liquids.

6. Troubleshooting

Common Issues and Solutions:

  • Cooler Not Turning On:
    • Ensure the USB Type-C cable is securely connected to both the cooler and a power source.
    • Verify that the power source is a 30W or higher fast charger and is functioning correctly.
    • Press the power button firmly.
  • Insufficient Cooling Performance:
    • Confirm that you are using a 30W or higher fast charger. Lower wattage chargers may not provide sufficient power for optimal cooling.
    • Check if the air intake or exhaust vents are obstructed by dust or other objects. Clean if necessary.
    • Ensure the cooler is properly attached to the device, making good contact with the cooling area.
  • Condensation on Device:
    • The Flydigi cooler's intelligent temperature control is designed to prevent condensation. If condensation occurs, it might be due to extreme ambient humidity or a malfunction.
    • Ensure the cooler is operating in its intelligent frequency conversion mode.
    • If the issue persists, discontinue use and contact support.
  • Excessive Noise:
    • The cooler is designed for ultra-low noise operation (<35dB).
    • Check for any foreign objects obstructing the fan blades or air ducts.
    • Ensure the cooler is securely attached and not vibrating against the device.
  • Magnetic Cooler (B8X/B7X) Not Adhering:
    • For iPhone 12 and above, ensure the phone's back is clean and free of cases that might interfere with magnetic attachment.
    • For Android/tablets using the magnetic patch, ensure the patch is securely and cleanly applied to the device.

7. Specifications

FeatureFlydigi B7XFlydigi B7
Cooling TypeMagneticBack Clip
Power1-27W Smart Frequency Convertor
LightingRGB Frequency Conversion Light RingSingle Color Frequency Conversion Light Ring
Noise Level<=37dB (typically <35dB at full load)
SwitchButton Power Switch
Weight93g96g
Compatibility (B7)N/A5.8-6.7 inch smartphones
Compatibility (B7X/B8X)iPhone 12 and above (direct magnetic), Android/Tablet (with magnetic patch)
Cooling Fins36x36mm² Extra-large, 120 ultra-thin aluminum fin sheets
Temperature Sensors3 units, 300 readings/sec
Flydigi B7X vs B7 specifications comparison

Comparison table for Flydigi B7X and B7 models.

8. User Tips

  • Optimal Power: Always use a 30W or higher PD fast charger to ensure the cooler operates at its maximum efficiency and cooling capacity.
  • Magnetic Patch Application: For non-magnetic devices, ensure the magnetic patch is applied to a clean, flat surface on your device's back for the best adhesion and cooling contact.
  • Airflow Awareness: Position the cooler so that its air intake and exhaust vents are unobstructed to maximize cooling performance and minimize noise. The innovative air suction design ensures hot air is directed away from your hands.
  • APP Customization: Utilize the Flydigi Game Center APP (for B8X/B7X) to fine-tune temperature settings, fan speed, and lighting to match your specific usage scenario and preferences.

9. Warranty and Support

Flydigi products are manufactured to high-quality standards. For any issues or inquiries, please refer to the seller's return policy or contact Flydigi customer support through their official channels. Keep your purchase receipt for warranty claims.

© 2024 Flydigi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.