VILCORN SZ-5005G

Contents

VILCORN SZ-5005G Wireless Gamepad User Manual

Model: SZ-5005G

1. Introduction

Thank you for choosing the VILCORN SZ-5005G Wireless Gamepad. This high-performance controller is designed to enhance your gaming experience across multiple platforms, including PlayStation 5, PlayStation 4, PlayStation 3, Nintendo Switch, PC, Android, iOS, and Steam Deck. Featuring advanced functionalities like a multi-function touchpad, adjustable RGB lighting, vibration feedback, 6-axis gyro sensor, Turbo burst, and macro programming, this gamepad offers precision control and immersive gameplay. Please read this manual carefully to ensure proper setup and optimal use of your new gamepad.

Video: Overview of the VILCORN SZ-5005G Wireless Gamepad features and multi-platform compatibility.

2. Package Contents

Please check the package carefully to ensure all items are present:

  • 1 x VILCORN SZ-5005G Wireless Gamepad
  • 1 x USB Receiver
  • 1 x USB Data Cable
  • 2 x Mushroom Caps (for joysticks)
Image showing the VILCORN SZ-5005G Wireless Gamepad, USB receiver, USB data cable, and two mushroom caps.

Image: Included components of the VILCORN SZ-5005G Wireless Gamepad package.

3. Setup and Connection

3.1 PS5 Wireless Connection

To connect your VILCORN SZ-5005G Wireless Gamepad to a PlayStation 5 console wirelessly:

  1. On your PS5 console, navigate to System Accessories Settings.
  2. Enter the Controller Connection Mode settings.
  3. Set the connection method to Use USB Cable (this is a temporary setting for initial pairing).
  4. Plug the provided USB receiver into a USB port on your PS5 console.
  5. Press and hold the receiver button for 3 seconds until its light changes from "slow flashing" to "fast flashing".
  6. Press and hold the SHARE + HOME buttons on your gamepad simultaneously for 3 seconds until its lighting effect is fixed, indicating a successful connection.

Note: You can play PS5 games through the receiver. Without the receiver, only PS4 games are supported on PS5. For computer, Switch, Android, and iOS, the receiver is not always required for wireless connection, depending on the device's native Bluetooth capabilities.

Diagram showing six steps for PS5 wireless connection: 1. Enter system accessories settings, 2. Enter controller connection mode, 3. Set to USB data cable connection, 4. PS5 console plugged into receiver, 5. Press and hold receiver button for 3 seconds, 6. Press and hold SHARE+HOME on gamepad for 3 seconds.

Image: Step-by-step guide for connecting the gamepad wirelessly to a PS5 console.

3.2 Multi-Platform Wireless Connection (PC, Android, iOS, Switch, Steam Deck)

The gamepad supports USB, Bluetooth, and 2.4G connections. Specific connection methods may vary slightly by platform:

  • PC (Windows): Connect via USB cable, or use the 2.4G receiver for wireless play. For Bluetooth, ensure your PC has Bluetooth capability and pair the device through Windows Bluetooth settings.
  • Android/iOS: Enable Bluetooth on your mobile device, then put the gamepad into pairing mode (usually by holding a combination of buttons, refer to specific device instructions if needed). Select the gamepad from your device's Bluetooth list.
  • Nintendo Switch: Go to "Controllers" -> "Change Grip/Order" on your Switch console. Then, put the gamepad into pairing mode.
  • Steam Deck: Connect via Bluetooth through the Steam Deck's system settings.

4. Operating Instructions

4.1 Multi-Function Touchpad

The integrated touchpad allows for various interactive operations. Slide your finger to perform actions such as menu selection, map zooming, and more. It can also be used for drawing and writing, adding versatility to your gameplay.

Diagram illustrating the multi-function touchpad with examples of drag and drag, slide touch, and multipoint gestures.

Image: Visual guide to using the multi-function touchpad.

4.2 Adjustable Colored Lights (RGB Lighting Joysticks)

Customize your gaming experience with adjustable RGB lighting around the joysticks. The gamepad features three lighting modes (breathing, flashing, and static color) and seven different colors. To adjust the light, press and hold the "L3" button (left joystick press) on the back of the game controller.

Diagram showing a black gamepad with RGB lighting around the joysticks, highlighting three lighting modes, seven different colors, and adjustable breathing light.

Image: Features of the adjustable colored lights on the gamepad.

4.3 3.5mm Stereo Audio Jack

Connect your headphones directly to the 3.5mm stereo audio jack on the gamepad to enjoy immersive game sound effects without disturbing others. Please note that microphone support is not available through this jack.

Diagram showing a black gamepad with a 3.5mm stereo audio jack, indicating headphone connectivity but no microphone support.

Image: Location and function of the 3.5mm stereo audio jack.

4.4 Vibration Feedback & 6-Axis Gyro Sensor

Experience realistic in-game feedback with the powerful vibration system and precise 6-axis gyro sensor. The controller will vibrate according to in-game events, such as collisions, explosions, or vehicle movements, enhancing immersion. The gyro sensor allows for motion control in compatible games, responding to tilts and rotations of the gamepad.

Diagram illustrating vibration feedback and 6-axis gyro sensor, showing joystick tilt left and right in a racing game scenario.

Image: Visual representation of the vibration feedback and gyro sensor in action.

4.5 Turbo Burst Function

Activate the Turbo burst function for rapid, continuous firing in arcade or action games. This feature provides a competitive edge in fast-paced combat scenarios. Refer to the specific game's controls or the gamepad's advanced settings for Turbo button assignment.

Diagram showing the Turbo burst function with rockets emanating from the trigger button on a white gamepad.

Image: Illustration of the Turbo Burst function.

4.6 M1/M2 Macro Programming

The gamepad features customizable M1/M2 macro programming buttons, allowing you to set personalized command sequences for smooth combos and improved operational efficiency. Consult the gamepad's advanced settings or accompanying software (if applicable) for detailed instructions on programming macros.

Diagram showing the M1/M2 macro programming buttons on the back of a white gamepad, with an example of a complex button sequence being mapped to a single macro.

Image: Location and function of the M1/M2 macro programming buttons.

5. Charging and Battery Life

The VILCORN SZ-5005G Wireless Gamepad is equipped with a built-in 1000mAh high-performance battery and intelligent power-saving design. This provides approximately 8-10 hours of usage time on a full charge. Charging takes only 2-3 hours using the provided USB data cable.

  • Internal Battery: 1000 mAh
  • Charging Time: 2-3 Hours
  • Usage Time: 8-10 Hours
Diagram showing a white gamepad with battery specifications: 1000 mAh internal battery, 2-3 hours charging time, and 8-10 hours usage time.

Image: Battery capacity and performance details.

6. Specifications

FeatureDetail
Brand NameVILCORN
Model NumberSZ-5005G
TypeGamepads
Interface TypeUSB, Bluetooth, 2.4G
Compatible PlatformNintendo Switch, PlayStation, PC, Android, iOS, Steam
Compatible Sony ModelPS5 Slim, PlayStation 4, PlayStation 3, PS5, PS4 Pro, PS4 Slim
Trigger Button TypeHall-Linear
Hall EffectYes
RGB Lighting JoysticksYes
Wear-resistant JoysticksYes
High-concerned chemicalNone
CertificationCE
Product Dimensions (approx.)15.5 cm (6.1 inch) x 10.3 cm (4.06 inch) x 6.4 cm (2.52 inch)
Package Weight (approx.)0.318 kg
Diagram showing the product dimensions of the VILCORN SZ-5005G Wireless Gamepad: 15.5 cm (6.1 inch) length, 10.3 cm (4.06 inch) height, and 6.4 cm (2.52 inch) width.

Image: Product dimensions of the gamepad.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the gamepad. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the gamepad in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the gamepad regularly, even if not in use for extended periods.
  • Avoid Drops: Protect the gamepad from drops and impacts, which can damage internal components.

8. Troubleshooting

  • Gamepad not connecting:
    • Ensure the gamepad is charged.
    • For PS5, verify the USB receiver is properly plugged in and its light is fast flashing, and the gamepad's light is fixed after pressing SHARE+HOME.
    • For Bluetooth connections, ensure Bluetooth is enabled on your device and the gamepad is in pairing mode.
    • Try restarting both the gamepad and the console/device.
  • Buttons not responding:
    • Check if the gamepad is properly connected.
    • Ensure the gamepad is charged.
    • If using a wired connection, try a different USB port or cable.
  • Vibration not working:
    • Check in-game settings to ensure vibration is enabled.
    • Some games may not support vibration feedback.
  • Audio jack not working:
    • Ensure headphones are fully plugged into the 3.5mm jack.
    • Remember that microphone support is not available through this jack.

9. User Tips

  • Multi-Platform Versatility: Take advantage of the gamepad's wide compatibility to use it across your PS5, PC, Switch, and mobile devices for a consistent gaming experience.
  • Macro Programming: Experiment with M1/M2 macro programming to create custom button sequences for complex moves in your favorite games, giving you an edge.
  • RGB Customization: Personalize your gamepad's look by adjusting the RGB lighting modes and colors to match your setup or mood.
  • Wired vs. Wireless: For competitive gaming on PC or PS5, consider using a wired connection for minimal latency, though the wireless connection is generally robust for most gameplay.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the VILCORN Official Store directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.