1. Product Information
This manual provides detailed instructions for the WINXU FOC Sine Wave Brushless Motor Controller and TF-100 LCD Colour Display Set, designed for electric scooters and bicycles.
Product Overview
Image: The complete WINXU FOC Sine Wave Brushless Motor Controller and TF-100 LCD Display Set, showing the controller unit, LCD display, and various connection cables.
Specifications
| Attribute | Value |
|---|---|
| Product Name | Brushless Motor Controller for E-Bike |
| Type | Controller |
| Brand Name | WINXU |
| Model (Power) | 250W / 350W / 500W / 750W |
| Battery Voltage | 36V / 48V |
| Motor Power | 500W |
| Max. Current | 25A |
| Motor Type | Brushless motor (FOC Sine Wave) |
| LCD Model | TF100 Display-5pin |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 19 cm x 12 cm x 8 cm |
| Package Weight | 0.5 kg |
Controller Features
- FCO Sine Wave design for brushless motors with Hall sensors.
- Compatible with 3+5 wire or 3+6 wire brushless Hall motors.
- Self-learning function for high compatibility with almost all brushless motors.
- IPX6 waterproof design with waterproof rubber ring for controller safety.
- Pure aluminum alloy material with electroplated black design for stable heat dissipation.
TF-100 LCD Display Features
- 5-pin UART protocol color display.
- Integrated throttle.
- USB charging port for mobile devices.
Image: Close-up views of the controller, highlighting its IPX6 waterproof design and pure aluminum alloy construction for durability and heat dissipation.
2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Always disconnect the battery power supply before installing or working on the controller to prevent damage to the equipment.
- Ensure all connections are secure and correctly matched to avoid short circuits or damage.
- Do not work with the power on.
3. Setup & Installation
3.1 Pre-use Preparation
Before installing the controller, please disconnect the battery power supply. Do not work with the power on, as it may easily damage the equipment.
3.2 Understanding the Wiring Diagram
Before starting the installation, please be sure to carefully read the wiring diagram and fully understand the functions of all connectors before proceeding.
Image: Detailed wiring diagram for the WINXU FOC Sine Wave Brushless Controller, illustrating connections for Battery, Throttle, Power lock, LCD/LED Display (5p), PAS Sensor, Low level brake, Self-learning, Light power supply, Hall Sensor, and Motor U.V.W (3-phase wire).
3.3 Connector Function Introduction and Installation Steps
- Motor Phase Wires: Connect the three thick wires (yellow, green, blue) from the controller to the corresponding motor phase wires. Ensure a secure connection as these handle high current.
- Motor Hall Sensor: Connect the motor Hall sensor. This controller uses a 6-wire Hall sensor (red, yellow, blue for signal; red, black for working voltage; white for motor speed signal). If your motor has a 5-wire Hall sensor, ignore the white speed signal cable; the controller will automatically obtain the motor speed signal.
- LCD Display (TF-100): Connect the 5-pin LCD display cable. Red and black are for operating voltage, blue for controller power control, green for RX, and yellow for TX.
- Power Lock: Connect to your bicycle's key lock switch if applicable. This connector can be ignored if your bicycle does not have a key lock.
- Throttle: Connect the Hall throttle (thumb or twist). The throttle receives a signal voltage of 1.1-4.2V. Red and black are for operating voltage, and white is for the Hall signal. Ensure correct connection.
- PAS Sensor: Connect the magnetic pulse type PAS sensor. Red and black are power voltage wires, and blue is the pulse signal cable.
- Speed Limit: This connector is used for external speed limiting. When plugged in, the controller activates speed limit mode (15-27 km/h).
- Low-Level Brake: Connect the low-level brake. This system automatically cuts off motor power when the brake is applied. Black is the negative wire, and white is the brake signal cable.
- Light Power: This connector outputs battery voltage for devices like headlights, brake lights, horns, and USB chargers. Yellow is positive, black is negative.
- Battery: Connect the battery last. Ensure positive and negative terminals are connected correctly. Double-check for short circuits and reverse polarity before connecting.
3.4 Initial Motor Matching (Self-Learning)
After the first installation, use the self-learning cable to complete motor matching:
- Lift the motor hub off the ground.
- Plug in the self-learning connector. The motor will start driving.
- If the motor drives in the opposite direction, disconnect and reconnect the self-learning connector to change the driving direction.
- Once the motor drives in the correct direction and without vibration, disconnect the self-learning cable. You can then test riding normally.
3.5 Installation Demonstration Video
Video: A demonstration of the controller installation and testing process, including connecting wires and verifying motor function.
4. Operation
4.1 TF-100 LCD Display Overview
Image: The TF-100 LCD display, showing its screen, power and mode buttons, and a USB charging port for mobile devices.
4.2 Basic Operation
- Power On/Off: Press the power button on the TF-100 LCD display to turn the system on or off.
- Changing Gears: Use the "Mode" button on the TF-100 LCD display to cycle through different gear settings (e.g., Gear 1, 2, 3) to adjust speed.
- Throttle Control: The integrated throttle on the TF-100 LCD allows for speed acceleration.
- Brake Function: Pulling the brake lever will cut off the controller's power output, ensuring safety.
4.3 Accurate Speed Display Settings (P06 & P07)
To ensure accurate speed display on the LCD:
- Enter the LCD setting mode.
- Set your motor wheel diameter in P06 (in inches).
- Set the speed magnet in P07. A common starting value is 23.
- Test the real-time speed using a map navigation app.
- If the LCD speed is higher than the navigation app, reduce the P07 parameter.
- If the LCD speed is lower than the navigation app, increase the P07 parameter.
- Adjust P07 until the LCD displays an accurate speed.
4.4 Throttle Test Video
Video: A demonstration of the TF-100 Colour LCD throttle test, showing gear changes and power output when the brake is pulled.
5. Maintenance & Storage
5.1 Cleaning
- Turn off the device before cleaning.
- Use a soft, lint-free cloth to clean the controller and display.
5.2 Storage
- Store the device in a dry place at room temperature (15°C - 35°C).
- For long-term storage, if not used for a long time, charge the device to 50% every 3 months to maintain battery health.
6. Troubleshooting
6.1 LCD Error Code Explanation
| Error Code | Description |
|---|---|
| E02 | Brake fault |
| E03 | PAS sensor fault |
| E04 | 6KM/H cruise mode |
| E05 | Real-time cruise |
| E06 | Battery undervoltage |
| E07 | Motor failure |
| E08 | Throttle fault |
| E09 | Controller failure |
| E10 | Communication signal reception failure |
| E11 | Communication signal transmission fault |
| E12 | BMS communication fault |
| E13 | Headlight fault |
6.2 Resolving E07 Motor Failure Error
The E07 error code indicates that the device has not completed motor matching and parameter detection. To resolve this:
- Perform the initial motor matching process using the self-learning cable as described in Section 3.4.
- After motor matching, use the throttle and high-speed gear to drive the motor at high speed.
- The controller will detect the motor parameters and status. If no fault is detected, the E07 error code will automatically be removed.
- If E07 persists, it may indicate insufficient driving speed, a fault with the motor, or a motor Hall sensor. Check these components.
7. User Tips
- Motor Compatibility: This controller is designed for brushless motors only. It is not suitable for brush motors. Ensure your motor is a brushless type.
- TF-100 LCD and E-bikes: The TF-100 LCD is primarily designed for scooters and does not support the PAS (Pedal Assist System) function for E-bikes. If PAS functionality is required, this kit is not suitable.
- Integrated Throttle: The TF-100 LCD has a built-in throttle. Therefore, it does not support installing an external throttle. Any throttle connector on the controller should be ignored if using the TF-100.
- Initial Setup: Always perform the motor parameter test using the self-learning wires the first time the controller is installed.
- Hall-less Motors: If you are using a Hall-less motor, this kit is not recommended as the LCD will display an E07 error code. Consider using an S810 kit for Hall-less motors.
- Reverse Motor Direction: If the motor runs in reverse after initial installation, short-connect the self-learning wire to change the motor's initial direction.
- Universal Voltage: The controller is universal for 36V and 48V systems. It automatically adjusts to the connected battery voltage.
- Sine Wave Controller: This is a sine wave controller, providing smooth and quiet motor operation.
8. Warranty & Support
8.1 Manufacturer Information
Manufacturer: ShenZhne Winxu Technology Co., Ltd
Address: No.118, Building B, Yongxing Office Building, No. 68, Tianyun Road, Songgang Street, Baoan District, Shenzhen, China
E-mail: Winxutech@163.com
Tel: +86-15814065441
8.2 EU Authorized Representative
Name: Vermilion Bird OU
Address: Tartu mnt 67/1-13b, Kesklinna linnaosa, 10115 Tallinn Harju maakond, Estonia
E-mail: vermilionbird.eu@outlook.com
8.3 Technical Support
The seller provides technical support. If you encounter any technical problems or have questions about the product, please leave a message to consult. Most issues can be resolved through correct LCD settings or wiring adjustments.
For further details, you may refer to the official user manual PDF: User Manual (PDF)
9. Disposal & Recycling
This product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.