1. Introduction
This manual provides detailed instructions for the installation and operation of the WRWD Wireless CarPlay & Android Auto Interface. This module is designed to upgrade your original Audi car screen with modern smartphone integration features, offering enhanced navigation, communication, and entertainment capabilities.
The system integrates seamlessly with your car's existing controls, including the central control knob and steering wheel buttons, for a familiar and intuitive user experience.

2. Product Information
2.1 Package Contents
- CarPlay Module (Dimensions: 135mm x 70mm x 20mm)
- LVDS cable (1 pcs)
- Power cable
- WI-FI antenna

2.2 Compatible Models
This interface is compatible with the following Audi models with 3GMMI systems:
| Model | Screen Size | Years |
|---|---|---|
| A4/A5/Q5/S4/S5 | 6.5 inch | 2009-2011 |
| A4/A5/S5 | 6.5 inch ~ 7 inch | 2012-2015 |
| Q5 | 6.5 inch ~ 7 inch | 2012-2018 |
| A6L/A7 | 8 inch (Telescopic) | 2012-2015 |
To confirm compatibility, check your car's MMI version. For Audi A6L/A7 (2012-2015), ensure the model shown in the picture can be used. You can find MMI version information in your car's setup menu.

3. Function Statement
3.1 CarPlay/Android Auto Features
The built-in vehicle machine interaction system allows seamless integration of your iPhone or Android device. It utilizes the central control knob and steering wheel buttons for voice commands and control of phone functions, information, navigation, and music. The system supports both wireless and wired CarPlay connections.

3.2 Reversing Video Input
The smart module can decode video signals and supports rear-view video input, allowing for the installation of a rear-view camera.
4. Specifications
- Operating Voltage: 9-16V
- Operating Temperature: -30 ~ +75°C
- Stored Temperature: -30 ~ +85°C
- Environment Humidity: ≤98% (at 45°C), 65±5% (rated)
- Power Consumption: 500mA (rated), 3A (Max)
- Shutdown Current: 3 mA (Clock is on)
- Quiescent Current: less than 3 mA
- Charging Current: ≤2A. When the USB charging current > 1A, the host should activate the circuit protection function to control the current below 1.5A to avoid burning the product.
5. Installation
5.1 DIP Switch Configuration
CAUTION: Please ensure the CarPlay POWER is disconnected when adjusting the DIP switches. Once the DIP switches are set, then connect CarPlay POWER.
The DIP switches configure the module for your specific Audi model and screen size. For MMI systems with an INFO button, DIP switch 4 must be set to ON.
Example: For an Audi A6 with an 8-inch screen, set DIP switches 3 and 8 to ON, and others to OFF.

5.2 Identifying the Video Cable Port
Locate the correct video cable port on your car's head unit for connection.

5.3 Wiring Connection
Follow the wiring diagram carefully. Ensure all connections are secure.
- Power: Yellow (B+), Red (ACC), Black (GND)
- Camera Power: Blue wire
- Reserve Detect: Brown wire
- 360-RX: White and Black wires
- MIC: Extra Mic port
- Rear-CVBS: Rear view input
- Front-CVBS: Front view input
- AUX: Audio output
- USB: Connect phone, USB disk, software update
Note: Antennas cannot be attached to hardware surfaces. When plugging in the host end, check if the connection is securely fastened.

6. Operation
6.1 Switching Between Systems
To switch between the original car interface and the CarPlay/Android Auto interface, long press the "BACK" button on your car's controls.
6.2 Wireless CarPlay Connection
- On your phone, enable Wi-Fi and Bluetooth.
- On the CarPlay interface, navigate to Settings > Wireless CarPlay Settings > Discover and connect devices.
- Select the Bluetooth device name starting with "CX_BT....." from the list and pair your phone.

6.3 Wireless Android Auto Connection
- On your phone, enable Wi-Fi and Bluetooth.
- On the Android Auto interface, navigate to Settings > Wireless Android Auto Settings.
- Select the Bluetooth device name starting with "CX-BTXXXX" from the list and pair your phone.

6.4 Audio Settings
For optimal audio, connect your phone to the original car's Bluetooth and select both call and media options. Then, select the original car audio on the Bluetooth stereo interface. Alternatively, switch the original car sound channel to the AUX channel.
In the interface settings, navigate to Setup > Audio Settings and ensure "Use the original Bluetooth audio" is set to OFF. Also, ensure "Original multimedia selection aux" is enabled.

6.5 Reversing Camera Settings
If a reversing camera is installed, ensure it is connected to the camera power (blue wire) and the REAR-CVBS/AHD720P input. The interface should automatically detect and display the reverse camera feed when engaged.

6.6 Video Demonstration
Watch this video for a demonstration of the CarPlay connection process and basic operation:
7. Maintenance
To ensure the longevity and optimal performance of your WRWD CarPlay/Android Auto interface, follow these general maintenance guidelines:
- Keep the module and connections free from dust and moisture.
- Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.
- Do not use harsh chemicals or abrasive cleaners on the unit or your car's screen. Use a soft, dry cloth for cleaning.
- Ensure all cables are securely connected and not pinched or strained.
8. Troubleshooting
If you encounter any issues, please refer to the following troubleshooting steps:
- Screen not displaying normally: Check the LVDS cable connection and verify the DIP Switch settings are correct for your car model and screen size.
- Sound problems: Ensure the Multimedia and install system settings of the original car are correctly configured for audio output (e.g., AUX input selected). Verify your phone's Bluetooth is properly connected to the car's original Bluetooth for both calls and media.
- Install mainframe's pilot lamp not working: Check the power cable connection and ensure the fuse is normal and intact.
9. User Tips
- Compatibility Check: Always double-check the compatibility table and your car's MMI version before installation to ensure the correct module is selected.
- Rear Camera: If you plan to connect a rear camera, ensure it is compatible with the module's input specifications (REAR-CVBS/AHD720P).
- Audio Setup: For the best audio experience, ensure your phone is paired with the car's original Bluetooth for media playback, and the car's audio source is set to AUX.
10. Warranty & Support
For any technical support or warranty inquiries, please contact us via email:
E-mail: renwoda2022@163.com