1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your EPMAN 52mm (2-inch) 10 Color LED Digital Car Gauge. These gauges are designed to provide accurate and highly visible readings for various automotive parameters, enhancing your driving experience and vehicle monitoring capabilities. Please read this manual thoroughly before installation and use.
2. Features
- Gauge Diameter: 2 inches (52mm).
- Stealth Design: Black dial face when ignition is off.
- Customizable Backlight: 10 selectable backlight colors with memory function for day and night modes.
- Adjustable Brightness: 6 levels of brightness, with memory function for day and night modes.
- Buzzer Types: 3 selectable buzzer types (slowly, fast, all the time).
- Buzzer Levels: 4 selectable buzzer levels (silence to resounding).
- Open Ceremonies: 5 selectable variations for startup animation.
- Warning Function: Customizable warning value with 3 buzzer variations or option to turn off.
- Data Logging: Stores top values and warning values obtained during driving, with review and clear functions.
- High Visibility: Flat glass, high-definition scale, and long, narrow pointer for accurate indication.
- Responsive Movement: Utilizes a brushless stepping motor for smooth and instantaneous response.
- Durable Construction: Made from Aluminium + ABS with a silver housing and chrome bezel.
- Voltage: Designed for 12V vehicle systems.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | EPMAN |
| Product Name | 52mm Gauge |
| Manufacturer Part Number | EPXX701-EPXX709 |
| Material | Aluminium + ABS |
| Housing Color | Silver |
| Face Color | Black |
| Voltage | 12V |
| Diameter Size | 2" (52mm) |
| Special Features | universal, 10 colors backlight change, Waterproof Antifogging |
| Application | Car, Truck, Motorbike, Boat, Yacht |
| Item Weight | 0.6 kg |
| Country/Region of Manufacture | CHINA |
Gauge Specific Reading Ranges:
- Water Temperature Gauge (EPXX702): 20~120℃
- Tachometer Gauge (EPXX706): 0-9000 RPM
- Oil Press Gauge (EPXX704): 0-10 x100kpa (0-145 PSI)
- Oil Press Gauge (EPXX705): 0-140 PSI
- Volt Gauge (EPXX701): 10-15V
- Oil Temperature Gauge (EPXX703): 50~150℃
- Boost Gauge PSI (EPXX708): -30~+30 PSI
- Boost Gauge BAR (EPXX707): -1~2 x100kpa (-1 to 2 BAR)
- Exhaust Gas Temperature Gauge (EPXX709): 2-11 x100°C (200-1100°C)
4. Package Contents
Each gauge package typically includes the following components. Specific sensors and accessories vary by gauge type.
General Contents:
- 1 x EPMAN 52mm Digital Gauge (specific type as ordered)
- 1 x Mount Bracket Cup
- 1 x Meter Wire Harness
- 1 x Power Supply Wire Harness
- 1 x Double Sided Tape
- 2 x Buffer (for mounting)
- 1 x English Manual
Specific Sensor/Accessory Contents:
- Water Temperature Gauge (EPXX702): 1 x Temperature Sensor (1/8" NPT)
- Tachometer Gauge (EPXX706): 1 x Tachometer Signal Wire
- Oil Press Gauge (EPXX704/EPXX705): 1 x Oil Pressure Sensor (1/8" NPT), 1 x Sensor Wire
- Volt Gauge (EPXX701): No additional sensor
- Oil Temperature Gauge (EPXX703): 1 x Temperature Sensor (1/8" NPT)
- Boost Gauge PSI (EPXX708) / Boost Gauge BAR (EPXX707): 1 x Boost Sensor Wire, 1 x Three Way Joint (ID 4mm), 1 x Rubber Hose (ID 4mm)
- Exhaust Gas Temperature Gauge (EPXX709): 1 x Exhaust Temperature Sensor, 1 x Fitting (1/8" NPT)
5. Setup and Installation
Important Safety Warnings:
- Voltage Compatibility: This product is designed exclusively for 12V vehicle electrical systems. DO NOT install on vehicles with 24V systems, as this will cause damage to the gauge and potentially the vehicle's electrical system.
- Hot Components: Do not attempt installation immediately after the engine has been switched off. The engine and exhaust system components can be extremely hot and cause severe burns. Allow the vehicle to cool down completely before beginning installation.
- Professional Installation: Professional installation is highly recommended due to the complexity of automotive electrical and sensor systems. Incorrect installation can lead to vehicle damage or malfunction.
Wiring Instructions:
Ensure all connections are secure and properly insulated to prevent short circuits.
- White Wire: Connect to a 12V switched ignition source (ACC) that receives power only when the ignition is ON.
- Red Wire: Connect to a constant 12V battery source that provides power even when the ignition is OFF. This is for memory retention of settings.
- Yellow Wire: Connect to a 12V source that receives power when the small lamps (headlights/parking lights) are ON. This allows the gauge to switch to night mode brightness settings.
- Black Wire: Connect to a reliable vehicle ground point.
Sensor Wiring: Connect the specific sensor wire (e.g., temperature sensor, pressure sensor, boost sensor, tachometer signal wire) to its designated input on the gauge and to the corresponding sensor on your vehicle. Refer to the specific gauge's diagram for precise sensor connection points.
General Installation Steps:
- Mounting Location: Choose a suitable location for the gauge that does not obstruct your view of the road or interfere with vehicle controls. Use the provided mount bracket cup and double-sided tape for secure placement.
- Sensor Installation: Install the appropriate sensor for your gauge type into the vehicle. This may involve tapping into existing lines (e.g., boost/vacuum lines) or installing new sensors (e.g., water/oil temperature, oil pressure, EGT). Ensure all sensor connections are leak-free and properly sealed.
- Wire Routing: Carefully route all wiring from the gauge and sensors to the vehicle's electrical system, ensuring wires are protected from heat, sharp edges, and moving parts.
- Electrical Connections: Make all electrical connections as described in the "Wiring Instructions" section. Double-check all connections before applying power.
- Test Functionality: Turn on the vehicle's ignition and lights to test the gauge's functionality, including backlight, readings, and warning features.
6. Operation
Common Button Operation:
The gauge features a button on its backside for various settings and data review.
- Short Press: Used to switch between different function settings (e.g., backlight color, brightness level, buzzer type, warning value).
- Long Press: Press and hold the button until a buzzer sounds to enter the setting mode for the currently displayed function. The gauge will return to normal status if the button is released after 5 seconds without further input.
Adjustable Settings:
- Backlight Colors: Cycle through 10 available colors. The selected color will be remembered for both day and night modes.
- Brightness Levels: Select from 6 different brightness levels. The chosen level will be saved for both day and night modes.
- Buzzer Settings: Choose from 3 buzzer types (slowly, fast, all the time) and 4 buzzer levels (from silence to resounding).
- Open Ceremonies: Select one of 5 different startup animations for the gauge.
- Warning Value: Set an arbitrary warning value. When the reading exceeds this value, the gauge will trigger a warning buzzer. You can select from three buzzer variations or turn the warning buzzer off.
- Data Review: The gauge stores the top (peak) value and warning value achieved during driving. Use the button to review these stored values. You can also clear the stored top value.
- Offset Adjustment: Some gauges may offer an offset adjustment feature for fine-tuning readings. Refer to the specific gauge's manual for details on this function.
7. Maintenance
- Cleaning: Clean the gauge face and housing with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the display or finish.
- Wiring Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion. Ensure wires are not exposed to excessive heat or physical damage.
- Sensor Check: Inspect sensors for any damage, leaks, or blockages. Ensure they are securely mounted and functioning correctly.
- Software Updates: No user-performable software updates are typically available for these gauges.
8. Troubleshooting
- Gauge Not Powering On:
- Check the 12V ignition (white wire) and constant 12V battery (red wire) connections.
- Verify the ground connection (black wire).
- Check for blown fuses in the vehicle's electrical system.
- Incorrect Readings or No Reading:
- Ensure the sensor is correctly installed and connected to the gauge.
- Check the sensor wiring for breaks or poor connections.
- Verify the sensor itself is functioning correctly (may require specialized tools or replacement).
- For boost gauges, check for leaks in the vacuum/boost lines.
- Backlight Not Changing Colors/Brightness:
- Ensure the yellow wire is correctly connected to the vehicle's small lamp circuit.
- Verify button functionality for changing settings.
- Buzzer Not Functioning:
- Check buzzer settings via the button to ensure it's enabled and at an audible level.
- Verify warning value is set correctly if troubleshooting warning buzzer.
If you encounter persistent issues not resolved by these steps, professional assistance is recommended.
9. User Tips
- Optimal Placement: Consider mounting the gauge in a location that is easily visible but does not distract from driving. A pillar mount or dashboard pod can be effective.
- Wiring Best Practices: Use heat-shrink tubing or electrical tape to insulate all wire connections. Secure loose wires with zip ties to prevent them from interfering with pedals or other moving parts.
- Sensor Thread Sealant: When installing sensors with NPT threads, use an appropriate thread sealant (e.g., PTFE tape or liquid sealant) to ensure a leak-free connection.
- Initial Setup: Take time to familiarize yourself with the button operations for setting backlight, brightness, and warning values before driving.
10. Warranty and Support
For any questions regarding your EPMAN Digital Car Gauge, or for technical support, please contact the seller or manufacturer directly. Keep your purchase records for warranty claims. Professional installation is strongly recommended to ensure proper function and to avoid voiding any potential warranty due to incorrect installation.