Introduction
The Douk Audio P2-FM is a versatile audio device that combines the functionalities of a preamplifier, a headphone amplifier, a sound level indicator with captivating 6E2 tubes, an FM radio, and a digital clock with a Pomodoro timer. It is designed to enhance your audio experience with its rich sound performance and blend of vintage aesthetics with modern technology.
Features
- Vivid Music Spectrum: The VFD screen and two 6E2 tubes dynamically display audio levels in sync with the music rhythm, whether from MIC or line input.
- Enhanced Audio Style: Functions as both a preamplifier and a headphone amplifier, delivering rich sound and blending vintage fluorescence with modern technology.
- Handy FM Radio: Features manual input, auto-scan, and storage for up to 10 favorite FM stations. Includes a high-gain antenna for strong signal reception. The line output jack allows for private listening.
- Digital Clock for Bedroom: Provides accurate timekeeping (within ±1 minute per year) with customizable font and animation styles. An integrated Pomodoro timer supports productivity with a 30/5 minute work cycle.
- User-Friendly Design: Supports three selectable FM frequency bands for global coverage. Offers adjustable tube gain and 7 levels of VFD brightness for personalized settings.
Packing List
Please check the contents of your package upon receipt:
- 1x P2-FM Preamplifier Unit
- 2x 6E2 Tubes
- 1x DC 12V Power Adapter
- 1x FM Antenna
- 1x Set of Feet
- 1x Screwdriver
- 1x User Manual (this document)

Figure 2: P2-FM Packing List and Dimensions
Setup Instructions
- Install the 6E2 Tubes: Carefully insert the two 6E2 tubes into their respective sockets on the top of the unit. Pay close attention to the 'R' (Right) and 'L' (Left) channel markings on the tubes and ensure they are inserted into the correct sockets. Do not force the tubes.
- Attach the Feet: Peel off the adhesive backing from the included set of feet and attach them to the bottom corners of the P2-FM unit for stability.
- Connect the FM Antenna: Screw the provided FM antenna into the 'ANT' interface at the rear of the unit. For optimal reception, extend the antenna fully.
- Connect Audio Input (Optional):
- AUX Input: Connect your audio source (e.g., smartphone, CD player) to the 'AUX IN' 3.5mm jack on the rear panel using an audio cable.
- Microphone Input: The unit has a built-in microphone for sound level display. No external connection is needed for this function.
- Connect Audio Output (Optional):
- Line Output: Connect the 'LINE OUT' 3.5mm jack on the rear panel to your active speakers or other audio equipment.
- Headphone Output: Plug your headphones into the 3.5mm headphone jack on the front panel. Note that the headphone jack has priority; if headphones are connected, the LINE OUT will be muted.
- Connect Power: Connect the DC 12V power adapter to the 'DC 9V-14V IN' port on the rear panel, then plug the adapter into a power outlet.

Figure 3: P2-FM Interfaces and Controls
Operating Instructions
- Power On/Off: After connecting the power, the unit will display "Power ON" and then enter FM Radio mode by default. To turn off, press and hold the 'MIC/AUX' button.
- Mode Selection: Press the 'MODE/SET' button on the front panel to cycle through the display modes: Sound Level, FM Radio, and Clock.
- Volume Adjustment: Rotate the 'VOL/ADJ' knob on the top panel to adjust the output volume.
- FM Radio Operation:
- Tuning: In FM Radio mode, use the 'VOL/ADJ' knob to manually tune to desired frequencies.
- Auto-Scan & Save: The unit supports auto-scanning for stations and can save up to 10 favorite stations. Refer to the detailed PDF manual for specific steps.
- Frequency Bands: The P2-FM supports three selectable FM frequency ranges: 87.0MHz-108.0MHz, 76.0MHz-90.0MHz, and 65.0MHz-74.0MHz. These can be selected via settings.
- Sound Level Display: In Sound Level mode, the VFD screen and 6E2 tubes will visually represent the audio input level. This works with both AUX input and the built-in microphone.
- Clock Functions:
- Setting Time: In Clock mode, use the 'MODE/SET' and 'MIC/AUX' buttons in conjunction with the 'VOL/ADJ' knob to set the time.
- Customization: The clock allows for customizable font and animation styles.
- Pomodoro Timer: The integrated Pomodoro timer can be activated for a 30-minute work cycle followed by a 5-minute break.
- Adjusting Tube Gain: The 'GAIN' adjustment points for the 6E2 tubes are located on the top panel (refer to Figure 3). Use the included screwdriver to fine-tune the gain for each tube (L/R) to achieve desired visual effect.
- Adjusting Tube Bias: The 'BIAS' adjustment points for the 6E2 tubes are located on the top panel (refer to Figure 3). Use the included screwdriver to fine-tune the bias for each tube (L/R).
- VFD Brightness: The VFD screen brightness can be adjusted through 7 levels via the unit's settings.

Figure 4: P2-FM Multi-Function Controls and Features
Video 1: Demonstration of Douk Audio P2-FM features including power on, FM radio tuning, VU meter, and clock display.
Maintenance
- Tube Longevity: It is recommended to turn off the 6E2 tubes when the unit is primarily used for displaying time for extended periods to prolong their lifespan.
- Cleaning: Use a soft, dry cloth to clean the unit. Avoid using harsh chemicals or abrasive materials.
- Tube Replacement: If a 6E2 tube malfunctions or its glow diminishes significantly, it can be replaced. Ensure the unit is powered off and unplugged before attempting to replace tubes.
Troubleshooting
- No Sound/Display: Ensure the DC 12V power adapter is correctly connected and plugged into a working power outlet. Check that the 6E2 tubes are properly inserted into their sockets according to the R/L markings.
- No Line Output Sound: If using the LINE OUT, ensure no headphones are plugged into the front 3.5mm headphone jack, as it has priority and will mute the line output.
- Poor FM Reception: Ensure the FM antenna is securely connected to the 'ANT' port and fully extended. If reception is still poor, try repositioning the antenna or using an audio cable connected to the 'LINE OUT' or 'AUX IN' as an alternative antenna.
- VFD Display Issues: When AUX input is plugged in, the VFD can only display clock/sound level modes. In Radio mode, the VFD will only display the radio frequency. If the display is blank or erratic, try cycling through modes or power cycling the unit.
- One Channel Not Working: Check the insertion of both 6E2 tubes, ensuring they are firmly seated and in the correct R/L channels. Verify all audio cables are securely connected. If the issue persists, it may indicate a faulty component, and further support may be needed.
Specifications
| Parameter | Value |
|---|---|
| Brand | Douk Audio |
| Model | P2 FM |
| Audio Input | 3.5mm AUX / Microphone / FM |
| Audio Output | 3.5mm AUX / 3.5mm Headphone Jack |
| Display Mode | Sound Level / FM Radio / Clock |
| Input Impedance | 20KΩ |
| Output Impedance | 10Ω |
| SNR | ≥98dB |
| THD | 0.003% |
| Matched Headphone Impedance | 32-200Ω |
| Headphone Output Power | 50mW@32Ω |
| FM Frequency Range | ① 87.0MHz-108.0MHz ② 76.0MHz-90.0MHz ③ 65.0MHz-74.0MHz |
| Working Voltage | DC 9-14V |
| Dimensions (W*D*H) | 105*106*38mm / 4.13*4.17*1.50in |
| Net Weight | 402g / 0.89lb |
| Package Weight | 800g / 1.76lb |
User Tips
- The P2-FM is well-constructed and visually appealing, making it a great addition to any audio setup.
- Many users enjoy the nostalgic experience of having a radio integrated into their system again, especially with the visual appeal of the 6E2 tubes.
- The P2-FM can be connected to other Douk Audio devices, such as the ST01 PRO, via its AUX IN or LINE OUT ports to integrate radio functionality into your existing hi-fi system.
Warranty and Support
For detailed warranty information and technical support, please refer to the official Douk Audio website or contact your retailer. A comprehensive user manual in PDF format is available for download at Douk Audio P2-FM User Manual (PDF).
