Introduction
This manual provides detailed instructions for the newstyle Motion Sensor LED Night Light, available in RGB Colorful Light (HL-016A) and Warm White Light (HL-016B) variants. This versatile light features magnetic mounting, human body sensing, and multiple lighting modes, making it suitable for various indoor environments.
Package Contents
- Smart Night Light ×1
- Mounting Accessories ×2 (Magnetic iron plates)
- User Manual ×1
- Type-C Charging Cable ×1
Setup
Magnetic Installation
- Clean the desired mounting surface to ensure it is dry and free of dust.
- Peel off the protective film from one side of the magnetic iron plate.
- Firmly press the adhesive side of the magnetic plate onto the wall or desired surface.
- Align the back of the night light with the magnetic plate on the wall. The light will securely attach magnetically.
Charging the Device
The night light is equipped with a built-in 1500mAh rechargeable lithium-ion battery. Use the provided Type-C charging cable to charge the device. A red indicator light will typically show during charging and turn off or change color when fully charged.
Operating Instructions
Power Switch and Modes
The night light features a push switch to select between three operating modes:
- OFF: The light is turned off.
- ON (Steady On Mode): The light remains continuously on.
- AUTO (Automatic Induction Mode): The light operates using its human body sensor and light sensor.
Motion and Light Sensing (AUTO Mode)
In AUTO mode, the night light combines human body sensing and light control sensing:
- The infrared sensor detects human movement within a range of 3-5 meters and a detection angle of 110-120 degrees.
- The light sensor ensures the light only activates in dark environments.
- When movement is detected in a dark environment, the light will automatically turn on for 15 seconds.
- If no further movement is detected, the light will automatically extinguish after 15 seconds.
Light Color Options
- Warm White Light (HL-016B): Provides a soft, warm illumination (3000K color temperature).
- RGB Colorful Light (HL-016A): Offers a colorful gradient light effect and illusion effect, allowing for dynamic ambient lighting.
Maintenance
Battery Life and Charging
The built-in 1500mAh high-capacity lithium battery, combined with a 0.2W low-power LED light source, provides ultra-long battery life. When fully charged, the light can be used for up to 4 months in automatic induction mode (assuming 15 seconds of illumination per activation).
Cleaning
To clean the night light, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the ABS material housing.
Troubleshooting
- Light not turning on in AUTO mode: Ensure the environment is dark enough. The light sensor prevents activation in bright conditions. Check if the battery is charged.
- Light not detecting motion: Verify the light is set to AUTO mode. Ensure there are no obstructions blocking the sensor. The effective sensing range is 3-5 meters.
- Light not charging: Confirm the Type-C cable is securely connected to both the light and a power source. Check the charging indicator light.
- Inconsistent light behavior: Ensure the light is securely mounted and not vibrating, which could trigger the motion sensor.
Specifications
| Feature | Specification |
|---|---|
| Model Number | HL-016A (RGB Colorful Light), HL-016B (Warm White Light) |
| Luminous Flux | 249-2000 Lumens |
| Nominal Voltage | DC 5V |
| Battery Voltage | 3.7 V |
| Rated Power | 0.2W |
| Color Temperature | 3000K (for Warm White Light) |
| Wattage | 6-10W |
| Light Source | LED bulbs (integrated) |
| Body Material | ABS |
| Power Source | Rechargeable Battery (Lithium Ion, 1500mAh) |
| Power Generation | Switch |
| Motion Sensor Angle | 110-120° |
| Motion Sensor Range | 3-5 meters |
| Auto-off Time | 15 seconds |
| Dimensions (RGB) | 110mm (Height) x 53mm (Width) x 50mm (Top Diameter) |
| Dimensions (Warm White) | 94mm (Height) x 53mm (Width) x 50mm (Top Diameter) |
| Certifications | CCC, CE, EMC, FCC, ROHS |
| Origin | Mainland China |
User Tips
- For optimal motion detection, mount the light in a clear area without obstructions.
- Consider the RGB version (HL-016A) for creating atmospheric lighting in living areas or bedrooms.
- The Warm White version (HL-016B) is ideal for functional lighting in hallways, staircases, or bathrooms.
- Regularly charge the device to ensure continuous operation, especially if used frequently in high-traffic areas.
Warranty and Support
For warranty information or technical support, please refer to the seller's policy or contact the newstyle Official Store directly through the platform where the product was purchased. Keep your purchase receipt as proof of purchase.