OBDPEAK K60 Pro

OBDPEAK K60 Pro Android AI Screen User Manual

Model: K60 Pro

Important Notes

  • Power Supply: You must use the power cable included in the package to connect the power supply. Using other chargers may cause the K60 Pro to malfunction.
  • Android Auto Compatibility: Android Auto is only available with Android version 11 or above. Huawei phones do not support Android Auto.
  • System Upgrade Caution: If the device is functioning normally without issues, it is not recommended to upgrade the system as it may cause system instability.
  • Physical Handling: Do not arbitrarily squeeze the dash cam.
  • Original Charger: Always use the original charger provided with the device.
  • Network Connectivity: This device only supports network connection through WiFi and does NOT support SIM cards or 4G networks.

1. Setup and Installation

1.1. Power Installation

Connect the Type-C port of the power cord from the packaging box to the machine. Insert the other end into the car cigarette lighter port.

Power connection diagram showing Type-C cable connected to the device and the other end to a car cigarette lighter.
Power connection diagram showing Type-C cable connected to the device and the other end to a car cigarette lighter.

Caution: Do not use standard data cables, mobile phone chargers, or other non-standard chargers. Non-standard voltage and current may prevent the machine from starting or cause damage.

1.2. GPS Installation

The GPS module must be installed facing upwards, typically above the windshield or at the front of the center console. Ensure it is unobstructed by any part of the car glass.

1.3. TF Card Installation

It is recommended to use a TF Card with 32GB-128GB capacity, Class 10/U3 or higher. Insert the chip into the smaller slot with the gold contacts facing upwards.

1.4. Rear Camera Installation (Optional)

If you have purchased the version with a rear camera, connect the red wire of the rear camera to the positive pole of the reversing light. When reversing, the screen will automatically display the rear camera feed.

Rear camera wiring diagram showing connection to the dash cam and car's reversing light.
Rear camera wiring diagram showing connection to the dash cam and car's reversing light.

1.5. Mounting

The K60 Pro comes with a standard mounting bracket. A 13.8cm short bracket is also provided as a gift for better compatibility. If your car dashboard is uneven or has a small area, you can use the short bracket for installation, ensuring compatibility with most car models.

Image showing the standard and short mounting brackets for the device.
Standard and short mounting brackets for the device.

2. Operating Instructions

2.1. Power Button Functions

  • On/Off: Long press the power button for 3 seconds to turn the device on or off.
  • Screenshot: Long press the power button for 3 seconds, then select the screenshot function.
  • Monitor Backlight: Short press the power button to enter sleep mode or wake up the screen.

2.2. Gesture Operation

The K60 Pro features full-screen gesture operation similar to a mobile phone:

  • Swipe from left to right: Return to the previous page.
  • Swipe from right to left: Switch interfaces or applications.
  • Swipe down from top: Display the navigation bar/status bar.
  • Swipe up from bottom: Return to the home page or recent taskbar interface.
Diagram illustrating full screen gesture operations on the K60 Pro screen.
Diagram illustrating full screen gesture operations on the K60 Pro screen.

2.3. Main Interface Overview

The main interface provides access to various functions:

  • Navigation: Click the navigation icon to enter the default map navigation. Long press to select your preferred navigation application.
  • Mirror Link: Click the Mirror Link icon to activate the wireless cast function (Airplay for iOS, Android Wireless Mirror for Android). This allows you to share your phone's screen on the device.
  • Carplay: Click the Carplay icon to access Apple Carplay features, enabling calls, music, messages, and navigation.
  • Android Auto: Click the Android Auto icon to access Android Auto features, enabling calls, music, messages, and navigation.
Screenshot of the K60 Pro main interface showing icons for Carplay and Android Auto.
Screenshot of the K60 Pro main interface showing icons for Carplay and Android Auto.

2.4. Audio Output

The K60 Pro offers multiple audio output modes:

  • Native Audio: The device plays sound directly through its built-in speakers.
  • AUX Audio: Connect the provided AUX cable to your car's audio system. Ensure the car's audio system is correctly set up for AUX input.
  • Bluetooth (BT) Audio:
    • Carplay/Android Auto Mode: The device itself will not produce sound. Connect your phone to the device via Bluetooth, then reconnect your phone to your car's Bluetooth speaker. Audio will play through the car's speakers.
    • Android OS Mode: Connect the device to your vehicle's Bluetooth system.
Diagram showing various audio output options including native, AUX, FM, and Bluetooth.
Diagram showing various audio output options including native, AUX, FM, and Bluetooth.

2.5. Camera Function

Access the camera interface to view and manage recordings:

  • Switch Cameras: Click on the screen to switch between front and rear camera views.
  • Full Screen Mode: Double-click the screen to enter full screen mode.
  • Adjust View: In full screen mode, swipe up or down to adjust the camera's field of view.
  • Camera Settings: Click the gear icon to access settings:
    • Format SD Card: Resolve issues with TF card recording.
    • Streaming Switch: Turn on for streaming video (rear camera must be installed).
    • Lens Height Adjustment: Calibrate camera view.
    • Camera Horizontal Flip: Adjust camera orientation.
Image showing front and rear camera views in 1080P resolution.
Front and Rear 1080P camera views.

2.6. Playback Function

Click the Playback icon to view recorded videos and photos stored on the TF card.

2.7. Wallpaper Function

Click the Wallpaper icon to manage wallpapers. Note that only the secondary menu's wallpaper can be changed; the main interface wallpaper is fixed.

2.8. Music and Video Features

The device supports various media formats:

  • Video: MP4, MOV, 3GP, MKV, FLV, WMV, VOB, RMVB, MPG. (Does NOT support 2K and 4K resolution videos).
  • Music: MP3, OGG, AAC, FLAC, WAV. (Does NOT support WMA, APE).
  • Pictures: JPG, BMP.

2.9. More Applications

Scroll from right to left on the main interface to view all installed applications. You can also download and install more music and other apps via the Google Play Store.

2.10. Menu Language

To change the menu language, navigate to: Settings > System > Languages & input. Here you can add new languages and set your preferred language priority.

2.11. GPS Navigation

The K60 Pro offers two primary navigation methods:

  1. Via Carplay/Android Auto: Connect your phone via Carplay or Android Auto to use your phone's navigation program (e.g., Google Maps, Waze) in real-time on the 11.3-inch screen.
  2. Built-in Android System: Use the device's built-in Android system to download local map software from the Google Play Store. Connect to WiFi for online navigation.
Screenshot of the K60 Pro displaying GPS navigation on the 11.3-inch screen.
Screenshot of the K60 Pro displaying GPS navigation on the 11.3-inch screen.

2.12. Full Screen Reversing (with optional rear camera)

When reversing, the system automatically activates the high-definition rear camera, displaying a clear view of the area behind your car on the IPS screen. This assists in accurately assessing road conditions, even in adverse weather.

Image showing the K60 Pro screen displaying a full-screen reverse assist view with parking guidelines.
K60 Pro screen displaying a full-screen reverse assist view with parking guidelines.

2.13. GPS Tracking

After connecting the external GPS module, the DVR will display your current speed and record speed, coordinates, and track data.

Image showing the K60 Pro displaying GPS tracking information including coordinates, speed, and time.
K60 Pro displaying GPS tracking information including coordinates, speed, and time.

2.14. Loop Recording and G-Sensor

The device supports automatic seamless video recording in a loop. When the memory card reaches its maximum capacity, the oldest unlocked video clips will be overwritten. The G-Sensor automatically blocks recorded video files from being overwritten if a collision is detected.

Diagram illustrating loop recording and G-Sensor functionality.
Diagram illustrating loop recording and G-Sensor functionality.

3. Maintenance

  • Factory Reset: Most software failures can be resolved by restoring the device to factory settings.
  • Mounting Adjustment: The base can be removed by unscrewing the three bottom screws. It can then be reinstalled in the opposite direction to achieve different viewing angles.
  • Suction Cup Bracket: If using a suction cup bracket, remove any protective sticker from the back of the machine before attachment.

4. Troubleshooting

  • Device Not Starting/Damaged: Ensure you are using the original power cable and not a non-standard charger or data cable.
  • System Instability After Upgrade: If the device was functioning normally before an upgrade, it is generally not recommended to upgrade the system as it may introduce instability.
  • Carplay/Android Auto Issues: Ensure your phone's operating system meets the minimum requirements (Android 11+ for Android Auto). Verify Bluetooth and WiFi connections are stable.
  • App Download Issues: Ensure the device is connected to a stable WiFi network for Google Play Store downloads.
  • No 4G/SIM Card Functionality: The K60 Pro does not support SIM cards or 4G networks; it relies solely on WiFi for internet connectivity.
  • Boot Logo Change: The ability to change the boot logo with a car logo is not a documented feature of this device.
  • Power Source: The device is designed for a standard car cigarette lighter port (typically 12V). There is no explicit mention of 24V compatibility or direct fuse box connection without an appropriate adapter.
  • General Issues: Many software issues can be resolved by performing a factory reset.
  • Further Assistance: If you encounter persistent issues, please contact the seller's customer service for support.

5. Specifications

FeatureDetail
Brand NameOBDPEAK
ModelK60 Pro
SystemAndroid 14 OS
Screen Size11.3 Inch IPS Touch Screen (2.5D)
RAM4GB
ROM64GB
CPU8-core (Allwinner Chipset)
Camera Resolution1920x1080 (Front), 1080P (Rear, optional)
Number of Lenses2 (Dual Lens)
View Angle170°
Video CodeH.264
Video FormatTS
Frames Per Second30
Max External Memory256G (TF Card, Class 10)
Power SourceCorded Electric
Built-in ScreenYes
Loop-Cycle RecordingYes
Audio RecordedYes
NightShot FunctionYes
Rear CameraYes (optional)
Touch ScreenYes
Screen Ratio4:3
Imaging SensorGC2053
Pixels1200Mega
OSD LanguageMulti-language support (Albanian, Arabic, Chinese, Dutch, English, Filipino, Finnish, French, German, Japanese, Korean, Portuguese, Russian, Slovenian, Spanish, Thai, Ukrainian, Vietnamese)
GPS LoggerExternal
BatteryBuilt-In
Assembly ModeRearview Mirror
InterfaceAV-In, Bluetooth, Wi-Fi, Micro SD/TF
CarplaySupport, wireless
Android AutoSupport, wireless
AUX OutputConnect Car AUX Audio
Mirror LinkSupport, Airplay + Android wireless mirror
Bluetooth AudioSupport
NetworkWiFi only (No SIM Card/4G Network Support)
CertificationCE
Package DimensionsLength: 29cm, Width: 17cm, Height: 10cm
Package Weight1.1 kg
Product comparison table for K2 Pro, K8 Pro, and K60 Pro, highlighting K60 Pro's Android 14 system, 1080P front camera, 4GB+64GB RAM/ROM, 8-core CPU, and Google Store support.
Product comparison table for K2 Pro, K8 Pro, and K60 Pro, highlighting K60 Pro's Android 14 system, 1080P front camera, 4GB+64GB RAM/ROM, 8-core CPU, and Google Store support.

5.1. Standard Packing List

Diagram showing the standard packing list: Dash Cam, Car Charger, Short Bracket, User Manual, Rear Camera (optional), GPS Module, AUX cable, Box.
Standard packing list: Dash Cam, Car Charger, Short Bracket, User Manual, Rear Camera (optional), GPS Module, AUX cable, Box.
  • K60 Pro AI Screen * 1
  • 13.8cm short bracket * 1
  • Charger (Type C) * 1
  • AUX Cable * 1
  • GPS Module * 1
  • User Manual * 1
  • Rear camera * 1 (optional, about 6M cable, included with Rear camera version)

6. Warranty and Support

6.1. Product Guarantees

  • Free Replacement: 1 Year Free Replacement.
  • Firmware Upgrades: Free Firmware Upgrade Service is supported.

6.2. OTA Remote Update

The device supports Over-The-Air (OTA) technology for remote updates. This allows for new features, timely bug fixes, and improved product experience without needing to return the device.

To perform an OTA update, you will need to send the device's IEMI number and current version number to customer service. They will then remotely provide the updated software.

Screenshot of the K60 Pro's OTA update interface, showing current version and update tips.
K60 Pro's OTA update interface, showing current version and update tips.

6.3. Customer Service

For any questions or issues not covered in this manual, please contact the seller's customer service. They are available to provide assistance and resolve any problems you may encounter.

7. User Tips

  • Secure Mounting: The unique mount is designed to securely hold the device, even during hard braking or aggressive turns. Ensure it is properly installed to prevent accidental dislodgement.
  • App Compatibility: The K60 Pro runs on Android 14 and supports the Google Play Store, allowing you to download a wide range of Android applications, including specialized car-related apps.
  • Customizing Viewing Angle: The device's base can be adjusted by removing three bottom screws and re-orienting it to achieve your desired viewing angle.
  • Dashboard Fit: If your car's dashboard is uneven or has limited space, utilize the provided 13.8cm short bracket for optimal fit and stability.

8. Product Video Demonstration

A video demonstration showcasing the OBDPEAK K60 Pro's 11.3-inch Android 14 AI Screen, including gesture operation, Google Maps navigation, online music playback, Carplay/Android Auto functionality, front and rear camera views, and automatic full-screen reverse display.

OBDPEAK K60 Pro 11.3 Inch Android 14 Car Display: Wireless CarPlay, Android Auto & FHD Camera Demo

OBDPEAK K60 Pro 11.3 Inch Android 14 Car Display: Wireless CarPlay, Android Auto & FHD Camera Demo

1:21 • 1280×720 • feature_demo

Related Documents - K60 Pro

Preview OBDPEAK 4G Android AI Screen User Manual
Comprehensive user manual for the OBDPEAK K50 4G Android AI Screen. This guide details installation, functions, remote monitoring, Mirror Link, Apple CarPlay, and Android Auto. Learn about GPS navigation, dual-lens camera features, system updates, and troubleshooting for an enhanced driving experience.
Preview OBDPEAK T30 Android AI Screen User Manual
Comprehensive user manual for the OBDPEAK T30 10.26-inch Android AI Screen. This guide covers product specifications, features like CarPlay, Android Auto, Mirror Link, installation, system updates, and troubleshooting for this car DVR and GPS navigation device.
Preview OBDPEAK Carplay & Android Auto Smart Screen User Manual
User manual for the OBDPEAK Carplay & Android Auto Smart Screen, detailing installation, functions, connectivity, and troubleshooting for seamless integration with your vehicle.
Preview 4G Android AI Screen User Manual - OBDPEAK K50
Comprehensive user manual for the OBDPEAK K50 4G Android AI Screen, detailing installation, functions, remote monitoring, screen mirroring (CarPlay, Android Auto), camera features with ADAS, audio output, wireless data, system updates, and troubleshooting. Available in English and Korean.
Preview OBDPEAK K2 Pro Smart Screen User Manual
User manual for the OBDPEAK K2 Pro Smart Screen, detailing installation, Carplay, Android Auto, screen mirroring, music, Bluetooth, audio output, system settings, and troubleshooting.
Preview OBDPEAK Android AI Screen User Manual
User manual for the OBDPEAK Android AI Screen, detailing installation, gesture controls, system features like Carplay and Android Auto, camera functions, audio output, and system updates.