Introduction
Thank you for choosing the INSE P30 Pet Grooming Kit. This all-in-one professional grooming system is designed to provide a comfortable and efficient grooming experience for your pets while keeping your home tidy. It features a powerful vacuum to collect pet hair, an ultra-low noise design, and a variety of versatile tools for grooming, clipping, and cleaning.
Safety Information
Please read all safety instructions carefully before using the appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ensure the appliance is unplugged before cleaning or performing maintenance.
- Do not operate the appliance with a damaged cord or plug. If the cord or plug is damaged, contact customer support.
- Keep the appliance away from water or other liquids. Do not immerse the main unit in water.
- This appliance is intended for household pet grooming only. Do not use it for any other purpose.
- Supervise children and pets when the appliance is in use.
- Do not block the air inlets or outlets during operation.
- Ensure the dust cup is properly installed before use.
- Do not use the appliance on wet pets or in wet environments.
- Avoid direct contact of the clipper blades with your skin or your pet's sensitive areas.
Product Components and Setup
What's in the Package
The INSE P30 Pet Grooming Kit includes the following components:

Figure 1: All components included in the INSE P30 Pet Grooming Kit.
- Main Vacuum Unit (with 4.5L Dust Cup)
- Flexible Hose
- Accessory Holder
- Grooming Brush
- Dematting Tool
- Electric Clipper
- Guard Combs (3/6mm and 9/12mm)
- Cleaning Brush
- Crevice Nozzle
- Slicker Brush
Assembly Instructions
- Connect the Hose: Insert one end of the flexible hose into the suction port on the main vacuum unit until it clicks into place. Attach the desired grooming tool (e.g., grooming brush, clipper, crevice nozzle) to the other end of the hose. Ensure a secure connection.
- Attach Guard Combs (for Electric Clipper): If using the electric clipper for trimming, select the appropriate guard comb (3/6mm or 9/12mm) and slide it onto the clipper head until it locks.
- Power Connection: Plug the power cord into a suitable 120V AC outlet.
Video 1: Demonstration of the INSE P30 Pet Grooming Kit's assembly and various functions.
Operating Instructions
Powering On/Off and Suction Adjustment
- After assembly, turn the rotary speed control switch on the main unit to the 'ON' position to power on the device.
- Adjust the suction power by rotating the speed control switch. Start with a lower setting and gradually increase it to a level comfortable for your pet.
- To turn off the device, rotate the switch to the 'OFF' position.

Figure 2: Adjustable suction and 4.5L extra-large collector for efficient grooming.
Using Grooming Tools
- Grooming Brush: Use this brush to remove loose hair and dander, keeping your pet's coat healthy and shiny. The vacuum suction collects the hair directly.
- Dematting Tool: This tool is designed to gently remove tangles, knots, and loose undercoat. Use it with care, especially on matted areas, to avoid pulling your pet's skin.
- Electric Clipper: Attach the desired guard comb (3/6mm or 9/12mm) for the preferred hair length. Turn on the main unit and the clipper. Gently move the clipper against the direction of hair growth to trim. The vacuum will collect the trimmed hair.
- Crevice Nozzle & Cleaning Brush: These tools are ideal for cleaning up stray pet hair from furniture, carpets, and hard-to-reach areas after grooming.

Figure 3: One-click hair removal from the grooming brush for easy cleaning.

Figure 4: The dematting tool helps manage knots and loose undercoat.

Figure 5: Electric clipper with interchangeable guard combs for various hair lengths.

Figure 6: Crevice nozzle and cleaning brush for versatile household cleaning.
Maintenance
Emptying the Dust Cup
- Ensure the main vacuum unit is turned off and unplugged.
- Press the 'One-Button Dust Dumping' release button to detach the dust cup from the main unit.
- Empty the collected pet hair and debris into a trash bin.
- Reattach the dust cup securely to the main unit.

Figure 7: The 4.5L super-large dust container minimizes the need for frequent emptying.
Cleaning Filters
The INSE P30 features a 5-stage cyclone technology and includes a HEPA filter. Regular cleaning or replacement of the HEPA filter is crucial to maintain strong suction power.
- After emptying the dust cup, carefully remove the internal filters.
- Tap the filters gently to dislodge any trapped dust and hair.
- If necessary, rinse the washable filter components under running water. Ensure they are completely dry before reassembling.
- Replace the HEPA filter as recommended by the manufacturer or when suction power noticeably decreases.
Cleaning Grooming Tools
- Remove any accumulated hair from the grooming brush, dematting tool, and slicker brush after each use.
- Use a small brush or cloth to clean the electric clipper blades. Do not rinse the electric clipper directly with water.
- Wipe down the exterior of the main unit and accessories with a damp cloth.
Cord Storage
The power cord can be conveniently stored at the bottom of the main unit to keep it tidy and prevent tangles.

Figure 8: Convenient power cord storage at the base of the unit.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not plugged in; Power outlet malfunction; Unit not switched on. | Ensure power cord is securely plugged in; Test outlet with another device; Turn the rotary switch to 'ON'. |
| Low suction power | Dust cup full; Filters clogged; Hose or tool blocked; Suction setting too low. | Empty dust cup; Clean or replace filters; Check hose and tools for blockages; Increase suction setting. |
| Clipper not cutting effectively | Blades dull or dirty; Hair tangled in blades; Guard comb incorrectly attached. | Clean clipper blades; Remove tangled hair; Reattach guard comb securely; Consider replacing blades if dull. |
| Excessive noise | Blockage in hose or tools; Dust cup not properly sealed; Unit vibrating on uneven surface. | Check for and remove blockages; Ensure dust cup is securely attached; Place unit on a stable, flat surface. |
Specifications
| Feature | Specification |
|---|---|
| Brand Name | INSE |
| Model | P30 |
| Dust Box Capacity | 4.5L |
| Weight | 3 - 6 KG |
| Voltage | 120V AC 50/60Hz |
| Noise Level | <59 dB |
| Power Cord Length | 4.5 M |
| Hose Length | 2 M |
| Product Size | 11.62 x 8.38 x 9.48 inches |
| Dust Storage Type | Dust Bucket (Bagless) |
| Special Suction Nozzle | Pet Brush |
| Function | Dry |
| Remote Control | No |
| Origin | Mainland China |
User Tips
- Introduce Slowly: For pets new to grooming vacuums, start with the lowest suction setting and allow them to get used to the sound and sensation before increasing intensity.
- Positive Reinforcement: Use treats and praise during grooming sessions to create a positive association with the device.
- Regular Cleaning: Empty the dust cup and clean filters regularly to maintain optimal suction and prevent odors.
- Check Blades: Periodically check clipper blades for sharpness and cleanliness to ensure smooth, snag-free trimming.
- Cord Management: Utilize the integrated cord storage to keep the power cord tidy and prevent tripping hazards when not in use.
Warranty and Support
The INSE P30 Pet Grooming Kit comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
For any product-related concerns, technical support, or warranty inquiries, please contact INSE customer support. Contact information can typically be found on the product packaging or the official INSE website.