Hippcron 7025

Contents

Hippcron 7-inch Wireless CarPlay/Android Auto Car Stereo Radio MP5 Player User Manual

Model: 7025 | Brand: Hippcron

1. Introduction

Thank you for purchasing the Hippcron 7-inch Wireless CarPlay/Android Auto Car Stereo Radio MP5 Player. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new car multimedia system. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage.

Hippcron 7-inch Car MP5 Wireless Radio with CarPlay interface

2. Safety Information

2.1. Preface: Important Instructions

To prevent injuries and fires, please pay attention to the following instructions:

  • To prevent short circuits, do not drop metal objects into the device.
  • If you detect smoke or a peculiar smell from the device, turn off the power immediately.
  • Do not subject the device to falling or strong collision.
  • Do not install the device in areas with strong sunlight, high temperature, high humidity, or excessive dust.
  • Replace fuses only with those of the same specification. Using a different specification fuse may cause device failure or fire. Always pull out the power wire when replacing a fuse.
  • To safely deal with changing road and traffic conditions, lower the volume when driving.
  • Do not allow the device to get wet when washing the car, as this may cause short circuits, fire, or other failures.

2.2. Warning

  1. Only connect the unit to a DC 12V power supply with negative grounding.
  2. Never install the unit where its operation for safety driving is restrained.
  3. Never use the video display function in the front while driving to prevent violation of laws and to reduce the risk of traffic accidents, except when using it for a rear view video camera.
  4. Never expose the unit, amplifier, or speakers to moisture or water to prevent electronic sparks or fires.
  5. Do not change the fuse in the power cord without professional guidance. An improper fuse may cause damage to this unit or even cause fire.

3. Product Overview

3.1. Front Panel Functions

The front panel provides easy access to essential controls:

Front Panel Functions diagram showing Power Key, Volume Increase, Volume Reduction, SD Card slot, AUX input, USB port, and IR sensor.
  • MIC: Microphone input.
  • RES: Reset button.
  • Power Key: Turns the unit on/off.
  • Volume Increase (+): Increases audio volume.
  • Volume Reduction (-): Decreases audio volume.
  • SD Card Slot: Supports TF card input for audio and video.
  • AUX: Auxiliary input for external audio devices.
  • USB: USB port for external audio/video input and charging.
  • IR: Infrared sensor for remote control.

3.2. Product Dimensions

Product dimensions showing 175mm (6.89inch) width and 100mm (3.94inch) height for the 7-inch display.

The unit features a 7-inch display with dimensions of approximately 175mm (6.89 inches) in width and 100mm (3.94 inches) in height.

3.3. Package Contents

Product List showing the main unit, remote control, optional 8 LED camera, wiring harness, and user manual.

The standard package includes:

  • Hippcron 7-inch Car Stereo MP5 Player
  • Remote Control
  • Wiring Harness
  • User Manual
  • Optional: 8 LED Camera (if purchased)

4. Specifications

4.1. General Features

  • Display: 7-inch TFT HD Touch Screen
  • Connectivity: Bluetooth, FM/TF/USB, Rearview Camera support
  • Video Format: 1080P
  • Audio Playback Formats: MP3/WMA/WAV/FLAC/OGG/APE
  • Video Playback Formats: RM/RMVB/DVD (VOB)/VCD (DAT)/MP1/MP2/DIVX/XVID/MP4/H263/H264/FLV/3GP/SWF/AVI/ASF/MJPEG, etc.
  • Amplifier: MOSFET amplifier: 45 watts x 4 max power output (Model 7388 High performance power amplifier chip).
  • FM Radio Range: 87.5MHz~108MHz (Europe)
  • Special Features: Remote Control, Power-off with auto-memory store function (radio or TF/USB mode), Clock Function, Mute Function, BT Function, Bass Treble, L&R channel stabilizer, Aux In Function, Rearview Camera Function, Video Input Function.
  • Chips: Built-in High-Speed Chips including 7388 High performance power amplifier chip and 8800 Wi-Fi 6 / Bluetooth 5.0 dual-mode single chip.
  • Backlight: Colorful Backlight Breathing Light.

4.2. Detailed Specifications

AttributeValue
Brand Namehippcron
Model Name7025
Display Size7 inch
Resolution1024*600
Out Power60W (Max 4*45W)
Voltage12 V (11 - 16V)
Item Weight0.69 kg
Material TypePlastic
PlacementIn-Dash
OSD LanguageEnglish, German, French, Italian, Portuguese, Russian, Spanish, Turkish, Arabic, Japanese, Korean, Chinese, etc.
Radio Response Bandwidth87.5-108 MHz
CertificationCE
SNR65dB
Frequency Response20Hz-20KHz
Loudspeaker Impedance4Ω-8Ω
FM Sensitivity25dB
FM Selectivity60dB
FM Separation35dB
Transmitter Frequency2468MHz
Power Output (Transmitter)100mW
Video In/OutPAL / NTSC composite video signal
Working Temperature-20°C to 70°C
Receiver Sensitivity-93dbm

5. Setup & Installation

5.1. General Installation Steps

For security, install the unit by referring to the following diagram description:

  1. Place the unit in the proper location, connect the unit according to the wiring diagram, and test if it works correctly.
  2. Wrap the connection lines with insulation tape to ensure complete wiring after successful testing.
  3. Bend the hook of metal 1 (mounting bracket) and insert the metal into the instrument panel, then fix it.
  4. Put the unit into the metal hook until it locks securely.

5.2. Wiring Diagram

Carefully follow the wiring diagram below. If the color of cables does not exactly match the picture, please refer to the paper manual included with your product.

Detailed wiring diagram for the car stereo. Labels include: 1. Parking Brake Cable, 2. Reversing Camera, 3. Power Supply +12V (+), 4. Steering Wheel Control, 5. Illuminate, 6. Radio Antenna, 7. Ground wire B (-), 8. Ignition Switch +12V (+), 9. Rear Right Horn (+), 10. Rear Right Horn (-), 11. Front Right Horn (+), 12. Front Right Horn (-), 13. Front Left Horn (+), 14. Front Left Horn (-), 15. Rear Left Horn (+), 16. Rear Left Horn (-).

Important: Check the speaker line carefully before installation. If any grounding or touching occurs, reconnect, or the unit may be damaged.

5.3. Removing Protective Film

Retaining the plastic film on the back of the unit will affect the machine's heat dissipation performance. Please remove the protective film before installation.

Image showing a hand peeling off a blue protective film from the back of the car stereo unit, with a warning to remove it for proper heat dissipation.

6. Operating Instructions

6.1. Basic Operation

  • Reversing Rear View Function: When using the reversing rear view function, the reversing video signal from the corresponding port input connection will automatically switch the display to the reversing visual state.
  • Audio/Video Input (Optional): Connect audio/video lines. Press the 'Mode' button to select the AUX-2 state.
  • Bluetooth Function: This function is only available for units with Bluetooth. After connecting your mobile phone, the Bluetooth symbol will turn green, indicating a successful connection. When calls come in, the unit will automatically enter the Bluetooth interface. Press the green phone icon to answer, and the red phone icon to hang up.
UI Interface Show demonstrating Bluetooth, FM Radio, Sound Equalization, PhoneLink, CarPlay, and Android Auto options.

6.2. Wireless CarPlay

The unit supports both wired and wireless Apple CarPlay.

  1. Wired Connection: Simply connect your iPhone to the USB data cable, and the CarPlay interface will automatically launch.
  2. Wireless Connection (First Time):
    1. Ensure Bluetooth and Wi-Fi functions are enabled on your mobile phone.
    2. On the car stereo, go to the Wireless CarPlay connection steps.
    3. On your iPhone, search for the car stereo's Bluetooth name (e.g., CAR-XTD-BT_21F7) and connect.
    4. Enter the PIN code (e.g., 0000) if prompted.
    5. A pop-up window will prompt you to use CarPlay. Select 'Use CarPlay'.
  3. Wireless Connection (Subsequent Times): The connection should be instant after the first successful pairing.

Note: The CarPlay signal is transmitted via Wi-Fi. Even if Bluetooth is turned off, it will transmit normally. If Wi-Fi is turned off, CarPlay will be disconnected.

Image showing both wireless and wired CarPlay and Android Auto connections with smartphones.

Video: Demonstration of Wireless CarPlay connection, music playback, making calls, map navigation, Wireless Android Auto connection, Mirror Link, and Reverse Camera functionality.

6.3. Wireless Android Auto

The unit supports both wired and wireless Android Auto. This feature may not be supported in all countries, and Google Play services need to be available locally.

  1. Prerequisites:
    1. Download and install "Android Auto" software from Google Play.
    2. A mobile phone with Android 6.0 or higher must be used.
    3. A valid data cable connection is required for wired connection.
  2. Wired Connection: Connect your Android phone to the USB data cable, and the Android Auto interface will automatically launch.
  3. Wireless Connection:
    1. First, turn on the Bluetooth and Wi-Fi functions on your mobile phone.
    2. Connect your phone to the car stereo's Bluetooth.
    3. The Android Auto interface will automatically launch.

Note: The Android Auto signal is transmitted via Wi-Fi. Even if Bluetooth is turned off, it will transmit normally. If Wi-Fi is turned off, Android Auto will be disconnected.

Mirror Link allows you to display your smartphone screen on the car stereo. This feature supports both iOS (OS Phone) and Android devices.

Mirror Link feature showing an iPhone and an Android phone connected via USB, mirroring their screens to the car stereo display.

To use Mirror Link, connect your smartphone to the car stereo via a USB cable. The car stereo will then mirror your phone's display.

6.5. FM Radio Operation

FM Radio interface showing frequency tuning, preset stations (P1-P6), and options for LOC/DX, EQ, Stereo, Intro, AS/PS.

The radio interface allows you to tune to FM stations, save presets, and adjust settings like LOC/DX (local/distance), EQ (equalizer), and stereo mode.

6.6. Music Playback

Music playback interface showing current song, playlist, and controls for play/pause, skip, repeat, and shuffle.

Access your music files from USB or SD card. The music playback interface displays track information and provides controls for play/pause, skipping tracks, and adjusting volume.

6.7. Photo Viewing

Photo viewing interface showing a list of image files (bmp1, bmp12, etc.) and controls for zoom, rotate, play slideshow.

View images stored on your USB or SD card. The photo viewer allows you to browse files and perform basic operations like zooming and rotating.

6.8. Reversing Camera

The unit supports automatic switching to the rearview camera display when the vehicle is put into reverse gear (R gear).

Reversing Camera feature showing the car stereo display automatically switching to the reverse image with parking guidelines when in R gear. An optional IP67 waterproof 8 LED camera is shown.

Ensure the pink wire is correctly connected to the positive pole of the power supply and the reverse camera is properly connected for this function to work.

6.9. Steering Wheel Controls

Steering Wheel Controls showing an infrared remote attached to a steering wheel for wireless connection and easy control.

The unit supports external infrared steering wheel controls for convenient operation while driving. This allows for wireless control of various functions.

6.10. Remote Control

The included remote control provides access to various functions of the car stereo.

Remote control button layout with descriptions for each key.
No.Function
1Switch button (Power)
2Function conversion (Mode)
3USB/TF card play switch
4Automatic search/band conversion (BAND/AMS)
5Menu key
6Next song
7Volume +
8Answer key
9Hang up key
10The last one (Previous track)
11The volume (Volume -)
12Play/Pause
13Sound mode selection (EQ)

7. Troubleshooting

If you encounter issues with your car stereo, please refer to the following common troubleshooting steps:

  • No Power: Check all power connections, especially the +12V (yellow) and Ignition +12V (red) wires, and ensure the fuse is intact and of the correct specification.
  • No Sound: Verify speaker connections are secure and not short-circuited. Check volume levels and mute settings.
  • Bluetooth Connection Issues: Ensure Bluetooth is enabled on both the stereo and your phone. Try unpairing and re-pairing the devices. Make sure Wi-Fi is also enabled on your phone for wireless CarPlay/Android Auto.
  • CarPlay/Android Auto Not Connecting: For wireless connections, ensure both Bluetooth and Wi-Fi are active on your phone. For wired connections, try a different USB cable. Ensure the Android Auto app is installed and updated on Android devices.
  • Rearview Camera Not Displaying: Check the connection of the reversing camera and ensure the pink wire is correctly connected to the +12V power supply that activates when reverse gear is engaged.
  • Unit Freezes/Unresponsive: Use the RES (Reset) button on the front panel to restart the unit.

If problems persist, consult a professional installer or contact customer support.

8. User Tips

  • For optimal performance of wireless CarPlay and Android Auto, ensure your phone's Wi-Fi and Bluetooth are both active.
  • Always use high-quality USB cables for wired connections to avoid connectivity issues.
  • Regularly check for and remove any protective films on the unit, especially on the back, to ensure proper heat dissipation and longevity.
  • Familiarize yourself with the remote control functions for safer operation while driving, reducing the need to interact directly with the touch screen.
  • When installing the rearview camera, double-check the pink trigger wire connection to ensure automatic display switching.

9. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the unit's screen and exterior. Do not use abrasive cleaners or solvents.
  • Temperature: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
  • Fuse Replacement: If a fuse blows, replace it only with a fuse of the same amperage and type. Consult the wiring diagram for fuse locations and specifications.
  • Software Updates: Check the manufacturer's website periodically for any available software or firmware updates to ensure optimal performance and compatibility.

10. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.

A PDF version of the user manual may be available for download. Please check the product page or contact customer support for the link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.