AULA F2087 Pro

Contents

AULA F2087 Pro Tri-Mode Wireless Mechanical Gaming Keyboard User Manual

Model: F2087 Pro

1. Introduction

The AULA F2087 Pro is a high-performance mechanical gaming keyboard designed for versatility and customization. Featuring tri-mode connectivity (wired USB-C, 2.4G wireless, and Bluetooth), PBT keycaps, a Gasket structure for enhanced acoustics, hot-swappable switches, vibrant RGB backlighting, and a smart digital display with a multi-function knob, this keyboard offers a premium typing and gaming experience. This manual provides detailed instructions for setting up, operating, and maintaining your keyboard.

2. Features

  • Tri-Mode Connectivity: Seamlessly switch between wired USB-C, 2.4G wireless, and Bluetooth connections.
  • Gasket Structure: Five-layer sound-dampening design for a purer, more satisfying keystroke sound.
  • Hot-Swappable Switches: Easily change switches without soldering to customize your typing feel. Compatible with LEOBOG V3 and Star switches.
  • PBT Keycaps: Durable, oil-resistant keycaps with a premium texture.
  • Smart Digital Display & Multi-function Knob: Provides real-time information and intuitive control over settings like volume, backlight brightness, and connection mode.
  • Dynamic RGB Backlighting: 16 customizable backlight effects, 10 music rhythm effects, and approximately 16.8 million colors with custom definitions via software.
  • Side Lighting Effects: Additional RGB lighting on the sides of the keyboard for enhanced aesthetics.
  • Long Battery Life: Equipped with an 8000mAh (or 4000mAh option) rechargeable lithium battery for extended wireless use.
  • Two-Stage Adjustable Feet: Ergonomic design allows for preferred typing angles.

3. Package Contents

Please check the package for the following items:

  • AULA F2087 Pro Mechanical Gaming Keyboard
  • USB-C to USB-A Cable
  • 2.4G Wireless Receiver
  • Keycap Puller / Switch Puller (for hot-swappable models)
  • User Manual (this document)

4. Setup

4.1 Initial Charge

Before first use, it is recommended to fully charge the keyboard using the provided USB-C cable. Connect the USB-C end to the keyboard and the USB-A end to a powered USB port on your computer or a wall adapter.

4.2 Connection Modes

The keyboard supports three connection modes: Wired, 2.4G Wireless, and Bluetooth. Use the mode switch located on the top edge of the keyboard (near the USB-C port) to select your desired mode.

Keyboard mode switch, USB-C port, and 2.4G receiver slot

Image: Keyboard mode switch, USB-C port, and 2.4G receiver slot.

4.2.1 Wired Connection

  1. Set the mode switch to the 'Wired' position (usually indicated by a cable icon or 'USB').
  2. Connect the USB-C cable to the keyboard and your computer.
  3. The keyboard will be automatically recognized by your system.

4.2.2 2.4G Wireless Connection

  1. Set the mode switch to the '2.4G' position (usually indicated by a wireless icon).
  2. Take out the 2.4G USB receiver from its storage slot on the keyboard.
  3. Plug the 2.4G USB receiver into an available USB port on your computer.
  4. The keyboard should connect automatically.

4.2.3 Bluetooth Connection

  1. Set the mode switch to the 'BT' (Bluetooth) position.
  2. The keyboard will enter pairing mode. The smart display or an indicator light will show its status.
  3. On your device (PC, laptop, tablet, phone), open Bluetooth settings and search for new devices.
  4. Select 'AULA F2087 Pro' (or similar name) from the list of available devices to pair.
  5. Follow any on-screen prompts to complete the pairing process.

5. Operating Instructions

5.1 Smart Digital Display & Multi-function Knob

The smart display shows important information such as connection mode, battery level, and time. The multi-function knob allows for quick adjustments.

Close-up of smart display and multi-function knob showing light settings

Image: Smart display and multi-function knob interface.

  • Knob Function: Rotate to adjust volume (default) or backlight brightness. Press to cycle through functions displayed on the smart screen (e.g., volume, backlight settings).
  • Smart Display: Shows current time, battery percentage, connection status (wired, 2.4G, BT), and selected settings.

5.2 RGB Backlight Control

The keyboard features extensive RGB lighting customization using FN key combinations.

RGB backlight effects and control keys

Image: RGB backlight effects and control keys.

  • FN + INS: Cycle through 16 backlight effects (e.g., flowing, breathing, static, ripple).
  • FN + DEL: Change backlight color.
  • FN + ↑ (Up Arrow): Increase backlight brightness.
  • FN + ↓ (Down Arrow): Decrease backlight brightness.
  • FN + ← (Left Arrow): Decrease backlight speed.
  • FN + → (Right Arrow): Increase backlight speed.

5.3 Side Lighting Effects

Control the side RGB lighting independently.

  • FN + Right Shift: Switch side light mode.
  • FN + /?: Switch side light color.
  • FN + Right Alt: Cycle side light brightness.
  • FN + Right Ctrl: Cycle side light speed.

5.4 Adjustable Feet

The keyboard features two-stage adjustable feet on the underside to allow you to set your preferred typing angle for comfort.

Two-stage adjustable feet on the keyboard

Image: Two-stage adjustable feet.

6. Maintenance

6.1 Cleaning

  • Disconnect the keyboard from your computer before cleaning.
  • Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
  • For deeper cleaning, use the provided keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
  • Do not use harsh chemicals or abrasive materials.

6.2 Switch Replacement (Hot-Swappable)

The F2087 Pro features hot-swappable switches, allowing for easy replacement without soldering.

Close-up of hot-swappable switch sockets

Image: Hot-swappable switch sockets.

  1. Using the switch puller, carefully grip the switch from the top and bottom (where the clips are located).
  2. Gently pull the switch upwards until it detaches from the PCB.
  3. Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight.
  4. Press the new switch firmly into place until it clicks. Do not force it if it doesn't go in easily; check pin alignment.

7. Troubleshooting

7.1 Keyboard Not Responding

  • Wired Mode: Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
  • 2.4G Wireless Mode: Ensure the 2.4G receiver is plugged in and the keyboard is set to 2.4G mode. Try re-pairing by unplugging and replugging the receiver.
  • Bluetooth Mode: Ensure the keyboard is in Bluetooth mode and successfully paired with your device. Check your device's Bluetooth settings. Try unpairing and re-pairing.
  • Battery: Check the battery level on the smart display. If low, connect the keyboard to charge.

7.2 RGB Backlight Not Working/Incorrect

  • Ensure the backlight is not turned off (check brightness settings using FN + ↑/↓).
  • Cycle through different effects using FN + INS.
  • If using custom software, ensure settings are correctly applied.

7.3 Keys Not Registering

  • If a specific key is not working, try replacing its switch (if hot-swappable).
  • Ensure the keycap is properly seated.
  • Clean any debris around or under the affected key.

8. Specifications

Product specifications table

Image: Product specifications.

FeatureDetail
ModelF2087 Pro
Dimensions366.10 × 138.51 × 41.94 ± 0.1mm
Weight~1011g (without cable/receiver), ~1060g (with cable/receiver)
ConnectivityUSB-C (Wired), 2.4G Wireless, Bluetooth
Battery Capacity8000mAh rechargeable lithium battery (4000mAh option available)
Rated VoltageDC 3.7V (Full 4.2V)
Charging InterfaceUSB-C
Keycap MaterialPBT
Operation StyleMechanical
SwitchesLEOBOG V3 (Linear), LEOBOG Star Switch (Linear)
Rated Current200mA (default light) / 10mA (all lights off) @ 3.7V
System SupportWindows (XP, 7, 8, 10, 11), Mac (with Bluetooth BLE4.0/5.0), Android, iOS

8.1 Switch Specifications

LEOBOG V3 and Star switch specifications

Image: LEOBOG V3 and Star switch specifications.

Switch TypeLEOBOG V3 (Linear)LEOBOG Star Switch (Linear)
Stem MaterialPOMPOM
Initial Pressure28gf Min32gf Min
Total Travel3.7 ± 0.3mm3.5 ± 0.3mm
Conduction Travel1.3 ± 0.3mm1.8 ± 0.3mm
Conduction Pressure34 ± 3gf40 ± 3gf
Bottom-out Pressure45 ± 3gf55 ± 3gf

9. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. General tips for mechanical keyboards include:

  • Experiment with different switch types if you utilize the hot-swappable feature to find your preferred typing feel.
  • Regularly clean your keyboard to prevent dust and debris from affecting performance.
  • Utilize the customizable RGB lighting to match your setup or mood.
  • Keep the 2.4G wireless receiver in a clear line of sight to your computer for optimal signal strength.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.