1. Introduction
The ATK V100 Pro is a high-performance mechanical keyboard designed for gamers and professionals seeking versatility and responsiveness. Featuring three-mode connectivity (2.4G wireless, Bluetooth 5.0, and wired USB-C), a durable CNC aluminum alloy upper cover, and hot-swappable mechanical switches, it offers a customizable and low-latency experience. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your ATK V100 Pro keyboard.
2. Setup Guide
2.1 Package Contents
Before you begin, please ensure all items are present:
- ATK V100 Pro Mechanical Keyboard
- USB-C to USB-A Cable
- 2.4G Wireless Receiver
- Keycap Puller / Switch Puller (may be combined)
- User Manual (this document)
2.2 Charging the Keyboard
The ATK V100 Pro is equipped with an 8000mAh battery for extended wireless use. To charge, connect the provided USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a wall adapter. The keyboard's indicator light will show charging status.
2.3 Connecting the Keyboard
The ATK V100 Pro supports three connection modes:
2.3.1 Wired Mode
- Connect the USB-C end of the cable to the keyboard and the USB-A end to your computer.
- Ensure the mode switch on the keyboard is set to 'Wired' (usually indicated by a cable icon or 'USB').
- The keyboard will be recognized automatically by your operating system.
2.3.2 2.4G Wireless Mode
- Insert the 2.4G USB receiver into an available USB port on your computer.
- Set the mode switch on the keyboard to '2.4G' (usually indicated by a wireless icon).
- The keyboard should connect automatically. If not, press and hold the Fn key + the 2.4G key (refer to keyboard layout for specific key) to initiate pairing.
2.3.3 Bluetooth Mode
- Set the mode switch on the keyboard to 'Bluetooth' (usually indicated by a Bluetooth icon or 'BT').
- On your computer or device, go to Bluetooth settings and search for new devices.
- The keyboard should appear as 'ATK V100 Pro' or similar. Select it to pair.
- You may need to press and hold Fn + a specific Bluetooth key (e.g., Fn+1, Fn+2, Fn+3) to enter pairing mode or switch between paired Bluetooth devices.
2.4 Software Installation (ATK HUB)
For advanced customization of lighting effects, key remapping, and macros, download and install the ATK HUB software from the official ATK website (refer to the 'Warranty & Support' section for the website address). This software allows one-stop management of multiple devices.
3. Operating Instructions
3.1 Basic Key Functions
The ATK V100 Pro features a 101-key layout. All standard alphanumeric and function keys operate as expected. The keyboard also boasts 1ms ultra-low latency for a responsive experience, especially in gaming.
3.2 Multimedia and Function Keys
Use the 'Fn' key in combination with other keys (typically F1-F12 or dedicated multimedia keys) to access multimedia controls (play/pause, volume up/down, mute) and other system functions. Refer to the keycap legends for specific combinations.
3.3 Backlight Control (ARGB)
The keyboard features customizable ARGB lighting with 16 million colors and various effects. You can adjust brightness, change lighting modes, and select colors directly from the keyboard using Fn key combinations, or through the ATK HUB software for more precise control.
3.4 Hot-Swappable Switches
The ATK V100 Pro supports full key hot-swapping, allowing you to change mechanical switches without soldering. This enables personalized DIY experiences and easy replacement of faulty switches.
3.5 Ergonomic Design
The keyboard is designed with two-stage foot support, allowing you to adjust the typing angle for improved comfort and reduced fatigue during long sessions.
4. Maintenance
4.1 Cleaning
- General Cleaning: Use a soft, dry cloth to wipe the keyboard surface. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the keyboard.
- Keycap Cleaning: Use the provided keycap puller to remove keycaps. Clean them with a mild detergent and water, then dry thoroughly before reattaching.
- Dust Removal: Use compressed air to blow out dust and debris from between the keycaps and switches.
4.2 Switch Replacement
Thanks to the hot-swappable design, individual switches can be replaced easily:
- Power off the keyboard or disconnect it from your device.
- Use the switch puller tool to carefully grip and pull out the desired switch.
- Align the pins of the new switch with the holes on the PCB and gently push it in until it clicks into place. Ensure the pins are not bent.
- Replace the keycap.
4.3 Battery Care
- Avoid exposing the keyboard to extreme temperatures (hot or cold).
- Do not allow the battery to fully discharge frequently, as this can reduce its lifespan.
- If storing the keyboard for an extended period, charge it to about 50-70% before storage.
5. Troubleshooting
5.1 Keyboard Not Connecting/Responding
- Wired Mode: Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- 2.4G Wireless Mode: Ensure the 2.4G receiver is properly inserted and the keyboard is switched to 2.4G mode. Check battery level. Try re-pairing (Fn + 2.4G key).
- Bluetooth Mode: Ensure Bluetooth is enabled on your device and the keyboard is in Bluetooth mode. Check battery level. Try re-pairing or switching to a different Bluetooth profile (Fn+1/2/3).
- All Modes: Ensure the keyboard is charged. Restart your computer.
5.2 Keys Not Responding or Double-Typing
- Remove the keycap and check for any debris or obstruction around the switch.
- If the issue persists, the switch might be faulty. Utilize the hot-swappable feature to replace the problematic switch.
5.3 Backlight Issues
- Ensure the backlight is turned on and brightness is adjusted using Fn key combinations.
- Check the ATK HUB software for any conflicting settings or to reset lighting profiles.
5.4 Lag or High Latency
- In 2.4G or Bluetooth mode, ensure there are no strong interfering signals (e.g., other wireless devices, microwaves) nearby.
- For critical gaming, consider using the wired connection for the most stable and lowest latency performance.
- Ensure the keyboard's battery is sufficiently charged.
6. Specifications
| Feature | Specification |
|---|---|
| Product Name | ATK V100 Pro Mechanical Keyboard |
| Keyboard Standard | 101 Keys |
| Operation Style | Mechanical |
| Connection Mode | Wired (USB-C), Wireless 2.4G, Bluetooth 5.0 |
| Switches Hot Swap | Yes |
| Backlight Type | MULTICOLOR (ARGB, 16 million colors, lower lamp position) |
| Battery Capacity | 8000 mAh |
| Upper Cover Material | CNC Aluminum Alloy |
| Latency | 1ms Ultra-low latency |
| Application | Desktop, Laptop |
| Language | English |
| Origin | Mainland China |
| Certification | CE |
| Keyboard Structure | E-sports Gasket (PC Positioning Plate, Sandwich Cotton, IXPE/PET Sound Superior Pad, Silicone Sound Silicone Bottom Pad, PORON PCB, Sound Silencer Shaft Seat Cotton) |
6.1 Key Switch Specifications
| Switch Type | Description | Trigger Stroke | Total Stroke | Trigger Pressure |
|---|---|---|---|---|
| Aniya Axis | Advance Linear Axis, Material Pivot Sound HiFi | 2.0±0.2mm | 3.2±0.2mm | 40±10gf |
| Dream Fei Axis | Linear mechanical axis, Soft touch, stable and smooth | 1.8±0.5mm | 4.0±0.4mm | 54gf ± 10gf |
| Blueberry Ice Cream Shaft | Linear axis, Strong rebound bottoms out ahead of schedule | 1.0±0.4mm | 3.5±0.3mm | 40±10gf |
7. User Tips
- Experiment with Switches: Take advantage of the hot-swappable design to try different switch types that best suit your typing or gaming preferences.
- Customize RGB Profiles: Use the ATK HUB software to create and save multiple RGB lighting profiles for different applications or games.
- Keep Firmware Updated: Regularly check the official ATK website for firmware updates to ensure optimal performance and access to new features.
- Optimize Wireless Performance: For the best wireless experience, keep the 2.4G receiver close to the keyboard and avoid placing large metal objects between them.
8. Warranty & Support
For product support, technical assistance, or warranty inquiries, please contact your seller or visit the official ATK website. For services such as product driver download, please visit https://ATK.PRO.
