JIKONG BD4A17S4P

Contents

JKBMS BD4A17S4P Smart BMS User Manual

Model: BD4A17S4P | Brand: JIKONG

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your JKBMS BD4A17S4P Smart Battery Management System. This BMS is designed for Lifepo4, Li-Ion, and LTO battery types, supporting 8S to 17S configurations with a 0.4A active balance and a 40A charge/discharge current. Please read this manual thoroughly before use to ensure proper and safe operation.

JKBMS BD4A17S4P Smart BMS module with key specifications

Figure 1: JKBMS BD4A17S4P Smart BMS Module

2. Package Contents

Verify that all items are present in your package:

  • JKBMS BD4A17S4P Smart BMS Module
  • NTC Temperature Sensor (40cm)
  • Switch (50cm)
  • Wiring Harness (70cm)
  • Operating Manual (this document)
  • Pack Box
Contents of the JKBMS package including the BMS, NTC, switch, wires, and manual

Figure 2: JKBMS Package Contents

3. Setup

3.1. Hardware Connection

Follow the wiring diagram carefully. Incorrect wiring can damage the BMS or battery pack.

  1. Connect Balance Wires:
    • Connect the black cable (B0) to the total negative pole of the battery pack.
    • Connect red cable B1 to the positive pole of the first string of battery.
    • Connect red cable B2 to the positive pole of the second string of battery.
    • Continue connecting red cables sequentially to the positive poles of each battery string (B3, B4, ..., B13).
    • The last red cable (B13 in a 13S example) is connected to the total positive pole of the battery.
  2. Verify Balance Wire Connections:
    • Use a multimeter to measure the voltage between adjacent wires on the balance connector.
    • If the voltage difference between the batteries in each string of wires is less than 1V, it indicates that the wires are connected correctly.
  3. Connect P- Cable: Connect the P- cable from the BMS to the negative pole of the charger.
  4. Connect Total Positive Pole: Connect the total positive pole of the battery to the positive pole of the charger.
  5. Connect Switch: Connect the provided switch to the designated port on the BMS.

Video 1: JIKONG BMS Wiring Tutorial - This video demonstrates the correct wiring procedure for the BMS to the battery pack and charger.

Detailed wiring diagram showing balance wires connected to battery cells and main power connections to the BMS.

Figure 3: BMS Wiring Diagram

3.2. Initial Startup

  1. Ensure the total voltage of the battery pack is greater than 20V (for default BMS) or 10V (for 4S BMS) before starting up.
  2. Press the switch button to start the BMS. You should hear a beep and see an indicator light.

3.3. App Download and Connection

  1. Turn on Bluetooth on your mobile phone.
  2. For iOS: Search for "JIKONG BMS" in the App Store.
  3. For Android: Search for "JK BMS" in the Google Play Store.
  4. Open the app, click on the top left corner to search for devices.
  5. Select your device (e.g., JK_B2A24S15P) from the list and click to connect. The default password is 1234.
Mobile app screenshots showing device list, password entry, and detected data for the JKBMS.

Figure 4: Mobile App Interface for JKBMS

3.4. Initial Parameter Settings

For the first startup, parameters need to be set:

  1. Navigate to the settings page within the app.
  2. Enter the default parameter setting password: 123456.
  3. Set the number of units (cell count) and battery type (Li-ion/LiFePo4/LTO) according to your battery pack configuration.
  4. Once parameters are set, return to the real-time status page to verify normal operation.

4. Operating the JKBMS

4.1. Smart Energy Working Modes

The JKBMS features several smart energy working modes:

  • Storage Mode: In transportation, offline, or wireless transmission off mode, the BMS enters storage mode, which does not consume battery pack current.
  • Normal Working Mode: When the charger is inserted in storage mode and off mode, the BMS immediately returns to normal working mode. All protection, equalization, and communication functions become active.
  • Shutdown: To prevent the BMS from wasting power for a long time and damaging the battery pack, the BMS has an automatic shutdown voltage. It automatically shuts down when a cell falls below this voltage.
  • Standby Mode: When the battery pack is in a static state (no charge or discharge current and no equilibrium current), the BMS will automatically enter standby state after a set time (1-30 days, configurable) is exceeded.
Diagram illustrating the smart energy working modes: Storage, Normal, Shutdown, and Standby, and transitions between them.

Figure 5: Smart Energy Working Mode Switching

4.2. App Interface Functions

The JKBMS app provides comprehensive monitoring and control:

  • Temperature Sensor Interface: All JKBMS models are equipped with temperature sensors for monitoring.
  • RS485 Interface: All JKBMS models are configured with RS485 function by default for communication.
  • LCD Interface: All JKBMS models are equipped with an LCD interface by default for local display.
  • CAN Interface: Available only for configurations with "CAN" in the model name.
  • Heating Interface: Available only for configurations with "Heat" in the model name.
Screenshots of the JKBMS mobile app showing detailed battery parameters, settings, and control options.

Figure 6: Intelligent JKBMS App - More Parameters

5. Maintenance

The JKBMS is designed for durability and minimal maintenance. Key features include:

  • Six Security Protections:
    • Overcharge Protection: Prevents over-charging, which affects battery life.
    • Short Circuit Protection: Automatic protection when a short circuit occurs.
    • Overcurrent Protection: Prevents the current from exceeding the battery range.
    • Over-temperature Protection: Prevents the battery from overheating.
    • ALL-IN Protection: Prevents cable drop or poor contact.
    • Prevents Battery from Running Out: Ensures safe discharge limits.
  • Regular Monitoring: Periodically check battery status via the mobile app to ensure all parameters are within normal operating ranges.
  • Physical Inspection: Ensure all connections are secure and free from corrosion or damage.
Diagram illustrating six security protection features of the JKBMS: Overcharge, Short Circuit, Overcurrent, Over-temp, ALL-IN, and Prevent Battery Running Out.

Figure 7: Six Security Protection Features

6. Troubleshooting

6.1. BMS Does Not Turn On

  • Ensure that the last B+ line of the cable has been connected to the positive pole of the battery.
  • Start up after charging and ensure that the charger voltage is greater than 4V of the battery pack voltage.
  • Check whether the charger has voltage output.

6.2. Inaccurate Voltage Readings

  • Measure the actual total voltage of the battery pack with a multimeter.
  • Fill the actual total voltage in the "voltage calibration" field on the parameter setting page within the app.

6.3. Inaccurate Current Readings

  • The B- and P- terminals of the protection board use two 7AWG wires; both need to be connected in parallel, otherwise it will lead to current error.
  • Measure the actual current of the battery pack with a clamp meter.
  • Fill the actual current into the "current calibration" field on the parameter setting page. The larger the actual current, the higher the calibration accuracy.

6.4. Inaccurate Capacity Readings

  • An initial capacity is estimated according to the monomer voltage when the protection board is powered on for the first time, which may be inaccurate.
  • After the protection board is discharged to the cut-off voltage and then fully charged, the capacity is calibrated. The charging process cannot be interrupted during calibration.

6.5. Designed String Number Inconsistent with Actual String Number

  • Check whether the "unit quantity" in the parameter setting is set correctly.
  • If there is no voltage in two or more strings in the middle, check whether the acquisition cable has fallen off.

7. Specifications

AttributeValue
Brand Namejikong
JKBMS-typeBD4A17S4P
Handware or SmartSMART BMS
Battery Strings8S-17S
Battery TypeLi-ion/LiFePo4/LTO
Balance FunctionActive Balanced BMS
Charging Current40A
Charge and Discharge PortCommon Port BMS
FunctionOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
Temperature sensorYes
Active BalanceYes
CommunicationRS485/BT
Usage ScenarioPower BMS, Energy Storage BMS, 3C Digital BMS
CertificationCE, FCC, RoHS
OriginMainland China

8. User Tips

  • Always double-check all wiring connections before powering on the BMS to prevent damage.
  • For optimal performance, ensure your battery pack's total voltage meets the minimum requirement before initial startup.
  • Regularly update the mobile app to access the latest features and improvements.
  • If experiencing persistent issues, consult the detailed instructions available at https://github.com/JIKBMS/files/tree/main and the BMS protocol at https://github.com/syssi/esphome-jk-bms.

9. Support

For further assistance or inquiries, please contact JIKONG OVERSEA Store customer support. Refer to the product packaging or the seller's platform for specific contact details.

© 2024 JIKONG. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.