1. Introduction
The Aula S87 Pro is a high-performance mechanical keyboard designed for e-sports gaming and office use. It features a versatile three-mode connection (wired USB-C, 2.4G wireless, and Bluetooth 5.0), full-key hot-swappable switches, vibrant RGB lighting, and a comfortable gasket structure. This manual provides detailed instructions to help you get the most out of your keyboard.

2. Setup and Connection
The S87 Pro supports three connection modes: wired, 2.4G wireless, and Bluetooth. Ensure the keyboard is charged before initial use.
2.1 Charging the Keyboard
Connect the provided USB-C cable to the keyboard's charging port and the other end to a USB power source (e.g., computer USB port, wall adapter). The display screen will indicate charging status.
2.2 Connection Modes
The keyboard features a switch on the side to select between connection modes.

2.2.1 Wired Connection
- Ensure the mode switch on the keyboard is set to 'Wired' (usually indicated by a cable icon or 'USB').
- Connect the USB-C cable from the keyboard to your computer's USB port.
- The keyboard will be automatically recognized and ready for use.
2.2.2 2.4G Wireless Connection
- Locate the 2.4G USB receiver (usually stored in a slot on the keyboard).
- Plug the 2.4G USB receiver into an available USB port on your computer.
- Set the mode switch on the keyboard to '2.4G'.
- On the keyboard, press
Fn+~(tilde key) to enter 2.4G pairing mode. The display screen will show '2.4G Pairing'. - Once connected, the display screen will show '2.4G Paired'.
2.2.3 Bluetooth Connection
- Set the mode switch on the keyboard to 'BT' (Bluetooth).
- On the keyboard, press
Fn+1,Fn+2, orFn+3to select a Bluetooth channel. The display screen will show 'BT1 Pairing', 'BT2 Pairing', or 'BT3 Pairing'. - On your device (computer, tablet, phone), open Bluetooth settings and search for new devices.
- Select 'AULA-S87Pro-1', 'AULA-S87Pro-2', or 'AULA-S87Pro-3' from the list of available devices.
- Follow any on-screen prompts to complete the pairing. The display screen will confirm successful pairing.
3. Operating Instructions
The S87 Pro features a 1.14-inch TFT display screen and a multi-functional knob for enhanced control.

3.1 TFT Display Screen
The 1.14-inch TFT display in the upper right corner shows various functions and settings:
- Time & Date: Displays current time and date.
- Calendar: Shows the calendar.
- Power Status: Indicates battery level, charging status, and remaining power in 2.4G mode.
- Connection Status: Shows the active connection mode (Wired, 2.4G, BT1/2/3) and pairing status.
- Light Effect: Displays current RGB lighting mode and settings.
- Volume: Shows current volume level.
- Language: Indicates selected language (English/Chinese).
- Custom Picture: Can display custom images via driver software.
3.2 Multi-functional Knob
The knob has dual functions: rotation and press. It can be used to navigate menus on the display screen and adjust various settings.
3.2.1 Knob Functions
- Rotate:
- In Light Effect mode: Adjusts light effect speed or hue.
- In Volume mode: Adjusts system volume.
- In Language mode: Switches between English and Chinese.
- In other menu sections: Scrolls through options.
- Press:
- Short press: Confirms selection or switches between functions (e.g., volume/function in roller adjustment).
- Long press: Enters/exits menu or specific settings.
3.2.2 Roller Adjustment
The roller (knob) has dual functions. Pressing it switches between adjusting volume and other functions. After pressing ESC to restore default, the scroll wheel adjusts volume and pressing it again switches to adjust the volume function and returns to the main screen.
3.3 RGB Lighting Control
- Switch Light Effect Mode: Press
Fn+\|to cycle through different RGB lighting modes. - Adjust Brightness: Press
Fn+[{to decrease brightness, andFn+]}to increase brightness. - Adjust Speed/Hue: Rotate the multi-functional knob when in a light effect mode to adjust the speed of dynamic effects or the hue of static colors.
- TFT Screen Light Color Mode: Scroll the TFT screen to 'light color' mode. Rotate the knob to adjust the RGB color (Red, Green, Yellow, Cyan, Blue, Purple, White).
3.4 Other Key Functions
- Hot-swappable Switches: The keyboard supports full-key hot-swapping, allowing you to replace switches without soldering. Use the provided switch puller tool.
- Multimedia Keys: Specific key combinations (e.g.,
Fn+F1-F12) may activate multimedia functions. Refer to the keycap legends for specific functions.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Aula S87 Pro keyboard.
4.1 Cleaning
- Keycaps: Use a keycap puller to remove keycaps. Clean them with a mild soap solution and a soft cloth, then rinse and dry thoroughly before reattaching.
- Keyboard Body: Use a soft, lint-free cloth, slightly dampened with water or a mild cleaning solution, to wipe down the keyboard body. Avoid excessive moisture.
- Between Keys: Use compressed air to remove dust and debris from between the keys. A small brush can also be used.
4.2 Switch Replacement (Hot-Swappable)
The S87 Pro features hot-swappable switches, allowing for easy replacement without soldering.
- Carefully remove the keycap using a keycap puller.
- Use a switch puller tool to gently grip the switch and pull it straight up.
- Align the pins of the new switch with the holes on the PCB.
- Gently push the new switch into place until it clicks. Ensure it is seated firmly and evenly.
- Replace the keycap.

4.3 Battery Care
- Avoid fully discharging the battery frequently.
- Store the keyboard in a cool, dry place when not in use for extended periods.
- Do not expose the keyboard to extreme temperatures.
5. Troubleshooting
If you encounter issues with your Aula S87 Pro keyboard, refer to the following common solutions:
5.1 Connection Issues
- Keyboard not connecting via 2.4G/Bluetooth:
- Ensure the keyboard is sufficiently charged.
- Verify the mode switch is set to the correct position (2.4G or BT).
- For 2.4G, ensure the USB receiver is securely plugged in and try re-pairing (
Fn+~). - For Bluetooth, ensure your device's Bluetooth is on and try re-pairing to a different channel (
Fn+1/2/3). Remove previous pairings from your device's Bluetooth list if necessary. - Try connecting the keyboard via wired mode to confirm basic functionality.
- Intermittent connection:
- Ensure the keyboard is within range of the receiver/device.
- Avoid sources of interference (e.g., other wireless devices, large metal objects).
- Ensure the keyboard battery is not low.
5.2 Keys Not Responding
- Specific keys not working:
- If the keyboard is hot-swappable, carefully remove the keycap and switch for the non-responsive key. Check for any bent pins on the switch or debris in the switch socket. Reinsert the switch firmly or try a different switch.
- Ensure the keyboard is clean and free of debris that might be obstructing key presses.
- Entire keyboard not responding:
- Try switching connection modes (wired, 2.4G, Bluetooth) to isolate the issue.
- Restart your computer/device.
- Ensure the keyboard is charged.
5.3 RGB Lighting Issues
- RGB lights not working or stuck:
- Ensure the keyboard is charged.
- Try cycling through different RGB modes using
Fn+\|. - Adjust brightness using
Fn+[{andFn+]}. - If using custom settings, ensure the driver software is correctly installed and configured.
5.4 Display Screen Issues
- Display screen blank or frozen:
- Try restarting the keyboard by turning it off and on.
- Ensure the keyboard is charged.
6. Specifications
Below are the detailed product parameters for the Aula S87 Pro Mechanical Keyboard.

| Feature | Detail |
|---|---|
| Product Model | S87 Pro |
| Product Size | 366.10 x 138.51 x 41.94 ± 0.1mm |
| Product Weight | Approx. 1018g (without wire/receiver), 1067g (with wire/receiver) |
| Working Style | USB-C wired / 2.4G wireless / Bluetooth triple mode connection |
| PCB Board | Single Key Slot PCB |
| Positioning Plate | Slotted positioning plate |
| Battery Capacity | 8000mAh rechargeable lithium battery |
| Keycap Material | PBT material |
| Rated Voltage | DC 3.7V (full 4.2V) |
| Charging Interface | USB-C interface |
| Mechanical Shaft Body | Caramel Latte Shaft, Ash wood shaft V4, Hyacinth axis (Hot-swappable) |
| Rated Current | Approx. 160mA@3.7V (default light effect), 45mA@3.7V (off backlight) |
| System Support (Wired/2.4G) | Windows XP, 7, 8, 10 (Win95, Win98 may require driver) |
| System Support (Bluetooth) | Windows 8, 10 and above; Mac computers with Bluetooth BLE4.0/BLE5.0 and above; Android phones/tablets; iOS phones/tablets |
6.1 Design Features
- Gasket Structure: Provides a soft, elastic feel and reduces typing noise.
- Five-layer Silencer Fill: Enhances sound purity and typing experience.
- Slotted PC Positioning Plate: Ensures consistent key feel and sound.
- Fine Adjustment of Satellite Axis: Improves stability for larger keys.
- RGB Cool Light Effect: Offers approximately 16 million colors and various atmospheric lighting modes.

7. User Tips
- Experiment with Switches: Since the keyboard is hot-swappable, don't hesitate to try different mechanical switches to find your preferred typing feel and sound.
- Customize RGB: Utilize the various RGB lighting modes and color adjustments to personalize your keyboard's aesthetic.
- Driver Software: For advanced customization, including custom pictures on the TFT display, check the manufacturer's website for dedicated driver software.
- Battery Management: For optimal battery life, consider turning off the RGB backlight when not needed, especially in wireless modes.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's specific policies or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.