Xiaomi Smart Door Lock E30

Contents

Xiaomi Smart Door Lock E30

User Manual

1. Introduction

The Xiaomi Smart Door Lock E30 is an IoT intelligent door lock offering multiple unlocking methods, including human face recognition, fingerprint, password, Bluetooth, NFC, and traditional key. It features face verification based on a 3D face model constructed by integrated 3D structured light face recognition technology. This door lock seamlessly connects to Mijia and Apple HomeKit, enabling various smart home application functions such as smart linkage control and alarm capabilities when integrated with other Mijia and HomeKit smart devices.

Xiaomi Smart Door Lock E30 front and rear panels
Figure 1: Xiaomi Smart Door Lock E30 - Front and Rear Panels
Video 1: Overview of Xiaomi Smart Door Lock E30 features and design.

2. Package Contents

The product package typically includes the following items:

  • Front Panel
  • Rear Panel
  • Automatic Lock Body
  • Mechanical Lock Cylinder
  • Emergency Key (x2)
  • No. 5 Batteries (x4, 10 batteries mentioned in some documentation, but 4 are typically used for operation)
  • User Manual (this document)
  • Installation Hole Opening Drawing
  • Door Pinch Plate
  • Accessories Bag
  • Rear Panel Handle

3. Installation

The Xiaomi Smart Door Lock E30 should be installed by qualified professionals, as specialized tools and expertise may be required. If your purchase includes on-site installation service, please refer to the provided QR code (not included in this manual) or consult customer service for scheduling. Electronic instructions for installation may also be available via a QR code.

4. Setup

4.1. Preparation for Use

  1. Install Batteries: Open the rear cover of the interior door lock and install four No. 5 batteries. It is crucial to replace low batteries promptly to avoid the door lock becoming inoperable. In emergencies, the Type-C port can be used for temporary power supply, or the mechanical key can be used to open the door.

    Close-up of the battery compartment of the E30 door lock, showing four No. 5 batteries.
    Figure 2: Battery Compartment (4x No. 5 batteries)
  2. Reset the Door Lock: Insert a reset pin into the reset hole. Press and hold for 3 seconds, then release after hearing a voice prompt to complete the reset process.

    • After a successful reset, all user data is cleared, and the door lock will not function normally until it is bound to the Mijia APP and users are added.
    • Ensure you remember the administrator password. If forgotten, the door lock cannot be reset without administrator fingerprint verification.
  3. Clean Camera Surface: Remove the door lock protection sticker and ensure the camera surface remains clean for optimal performance.

4.2. Connecting to Mijia APP

The Xiaomi Smart Door Lock E30 integrates with the Mijia APP for smart control and interoperability with other devices.

  1. Download and Install Mijia APP: Scan the QR code (if provided separately) or search for "Mijia" in your device's app store. Install the application.

  2. Add Device: Open the Mijia APP, tap the "+" icon in the upper right corner, and follow the in-app instructions to add the door lock. Alternatively, scan the QR code on the device (if available) to directly enter the connection page.

    • Upon successful addition, any Bluetooth gateway equipment under your account will automatically connect to enable remote viewing of the door lock status.
    • The effective Bluetooth communication range is approximately 10 meters, but it can be affected by obstacles.
    • For optimal performance and faster linkage, especially with other Xiaomi intelligent equipment, it is recommended to use a gateway supporting MloT.
    • The door lock supports only the 2.4GHz Wi-Fi band. If connection issues occur, verify your router's band settings.
    Smartphone displaying the Mi Home app interface for door lock management.
    Figure 3: Mi Home App Interface for Door Lock Management
  3. Add Users: Navigate to the door lock's equipment page in the Mijia APP and add the first user (designated as the administrator by default) as prompted. The door lock will not function normally without at least one user added.

4.3. Local Setting Model

For situations where using the Mijia APP is inconvenient, you can access local settings:

  1. Short press the "Set" button located under the battery cover of the door lock.
  2. Verify your administrator's fingerprint or password.
  3. You can then perform actions such as adding/removing common users, setting the door lock volume, and selecting the speech language (Chinese/English supported).

5. Operation

The Xiaomi Smart Door Lock E30 offers multiple convenient ways to unlock your door.

5.1. Unlocking Methods

Icons representing various unlocking methods including AI fingerprint, long-term password, cycle/one-time password, mobile phone Bluetooth unlock, and emergency mechanical key.
Figure 4: Multiple Unlocking Methods
  • Face Unlocking:

    1. Stand approximately 0.5m in front of the door lock, facing it naturally. The face recognition icon will appear on the screen.
    2. Once verification is successful, push or pull the handle to open the door.

    Note: Face recognition is disabled 15 seconds after the door is opened or closed by default. To activate it immediately, touch the password keyboard.

  • Fingerprint Unlocking:

    1. Place your registered finger on the fingerprint identification area.
    2. Once authentication is successful, push or pull the handle to open the door.
    Person using fingerprint to unlock the E30 door lock.
    Figure 5: Fingerprint Unlocking
  • Password Unlocking:

    1. Enter your registered password on the keypad and press the Confirm key.
    2. Once authentication is successful, push or pull the handle to open the door.
    Diagram showing four password forms: Fixed, Virtual, Cycle, and Temporary.
    Figure 6: Password Forms
  • NFC Unlocking:

    The door lock supports NFC unlocking via compatible Xiaomi phones, bracelets, watches, or NFC door cards (additional purchase may be required). Simply tap the NFC device to the designated sensor area on the lock to unlock.

  • Bluetooth Unlocking:

    Unlock the door using your mobile phone via Bluetooth when connected to the Mijia APP.

  • Emergency Key Unlocking:

    1. Press the bottom of the keyhole cover plate.
    2. Pull the cover plate open downwards.
    3. Insert the emergency key and rotate it to unlock the door.

    Note: Store the emergency key in a safe, accessible location outside the house for emergency situations.

5.2. Unlocking from Indoors

  • Using the Interior Unlocking Key:

    1. Turn the child lock toggle switch down to release the interior unlocking key.
    2. Press the interior unlocking key and push or pull the handle to open the door.

    Note: If the child lock pull button is closed, you can directly press the interior unlocking key to unlock.

  • Using the Indoor Emergency Unlocking Knob:

    1. Rotate the indoor emergency unlocking knob clockwise or counterclockwise (the direction depends on the latch installation).
    2. Push or pull the handle to open the door.

5.3. Smart Linkage and Alarms

The E30 supports intelligent linkage with other Xiaomi smart devices and provides various alarms:

  • Door Lock Status: View the door lock status remotely via the Mijia APP.
  • One-Time Passwords: Share temporary one-time passwords for guests.
  • Smart Scene Customization: Customize smart home scenes, e.g., lights turning on when you unlock the door.
  • Do Not Disturb Mode: Activate a 'do not disturb' mode via the app.
  • Low Battery Alarm: Receive alerts when battery capacity is low.
  • Force Fingerprint Alarm: Pre-set a coercive fingerprint. If used in distress, it unlocks the door while silently calling a preset emergency number.
Image showing a hand on the door lock with a red circle indicating a 'force fingerprint alarm' scenario.
Figure 7: Force Fingerprint Alarm in action.

6. Maintenance

  • Battery Replacement: The door lock is powered by four No. 5 batteries. When the low battery warning is issued (flickering light or voice prompt), replace all batteries promptly to ensure continuous operation. The door lock can operate for up to 12 months on a single set of batteries. In case of complete battery depletion, use a Type-C power bank to provide emergency power.

    Diagram illustrating long battery life and Type-C emergency power interface.
    Figure 8: Long Battery Life and Type-C Emergency Power
  • Cleaning: Regularly clean the camera surface and fingerprint identification area with a soft, dry cloth to ensure optimal performance of face and fingerprint recognition. Avoid using abrasive cleaners or solvents.

  • Firmware Updates: Keep the Mijia APP and door lock firmware updated. Ensure a stable Wi-Fi connection during updates to prevent failures.

7. Troubleshooting

  • Door Lock Not Functioning After Reset: After a factory reset, all user data is cleared. The door lock will not operate normally until it is bound to the Mijia APP and at least one user (administrator) is added.

  • Low Battery Warning: If the door lock indicates low battery (flickering light or voice prompt), replace the four No. 5 batteries immediately. If completely depleted, use a Type-C power bank for emergency power.

  • Wi-Fi Connection Failure: The door lock supports only the 2.4GHz Wi-Fi band. If you experience connection issues, verify that your router is configured to operate on the 2.4GHz band.

  • Smart Linkage Issues: For seamless linkage with other Xiaomi intelligent devices, ensure you have a gateway supporting MloT. Maintain a stable Wi-Fi network connection for reliable linkage. Gateway linkage is generally more power-efficient and faster than direct Wi-Fi linkage.

  • Door Not Locking Properly: If the door fails to close or latch correctly, the lock may issue a "Flash" alarm. Ensure the door is fully closed and aligned with the strike plate.

  • Locking/Opening Alarm Status: A white flicker indicates successful locking. A red flicker indicates the door is unlatched or not locked.

8. Specifications

Feature Specification
Product Name Xiaomi Smart Door Lock E30
Product Model XMZNMST10LK (also XMZNMS03OD)
Product Size (Front Panel) 367 x 76 x 23 mm
Product Size (Rear Panel) 367 x 76 x 25 mm
Net Weight Approx. 3.3 kg
Power Supply 4 x No. 5 Batteries
Emergency Power Supply Type-C (5V...0.5A)
Wireless Connection Bluetooth 5.0/5.1, NFC, Wi-Fi IEEE 802.11b/g/n 2.4GHz
CMIIT ID 2022DP11139
Environmental Adaptability Level Level II (GA 374-2019)
Product Security Level Class B (GA374-2019)
Lock Cylinder Security Level Level C
Working Temperature -25°C to 55°C
Working Humidity 0-93% RH, no condensation
Executive Standard GA374-2019 and GA/T 73-2015 (lock cylinder)
Key Features Xiaomi HyperOS Connect, Bluetooth Networking, Intelligent Linkage, 9 Unlocking Methods, For Mi Smart Home
Diagram detailing various security systems: Communication, Unlock, Electronic, Structural, Alarm, and Storage.
Figure 9: Overview of Security Systems
Infographic showing durability tests: handle down pressure test (15000+ times), low/high temperature, salt spray, jPanel strength, fingerprint head durability.
Figure 10: Durability and Quality Tests

9. User Tips

  • Mi Home App Region: When connecting the door lock to the Mi Home App for the first time, ensure you change the app's region setting to "Chinese mainland" for proper functionality.
  • Battery Life: To maximize battery life, consider using a gateway supporting MloT for smart linkage, as direct Wi-Fi linkage can consume more power.
  • Emergency Access: Always keep the mechanical emergency keys in a secure and accessible location outside your home.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Xiaomi support channels or contact your retailer. A detailed user manual in PDF format is available for download at: Xiaomi Smart Door Lock E30 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.