SUGON 8650Pro

Contents

SUGON 8650Pro 1300W Hot Air Rework Station

Instruction Manual

1. Safety Guidelines

Please read all safety precautions carefully before operating this de-soldering station.

  • Always follow this manual for proper use. Do not use the unit for unspecified purposes.
  • The air outlet and surrounding areas become extremely hot. Exercise caution to prevent burns.
  • When idle, the handle must be correctly placed on its rack. Do not place it on the workbench or other surfaces.
  • After use, allow the de-soldering station to cool below 100°C (entering sleep mode) before turning off the power.
  • Ensure the air outlet remains unblocked. Clear any obstructions.
  • Do not place sharp objects on the air outlet hose to avoid damage.
  • Maintain a minimum distance of 2mm between the air outlet and the target item during use.
  • Handle the de-soldering station with care. Avoid tapping the handle or violently shaking the station.
  • Regularly inspect and maintain the station. Do not use if damaged, especially if the power cable or air gun handle wire is compromised.
  • Do not use the station in wet conditions or with wet hands to prevent short circuits or electric shock.
  • Do not use this station near flammable gases or other combustible substances. After use, do not place it near such materials.
  • Keep out of reach of children. Children are unaware of electrical product dangers.

2. Product Features

  • Four Working Channels: Both the handle and host feature CH1, CH2, CH3, and CH4 channels, allowing for storage of air volume and temperature settings for each.
  • Three Heating Methods: Supports various heating approaches for diverse applications.
  • Magnetic Switch Control: Easy real-time operation; placing the handle on its rack activates sleep mode.
  • Automatic Sleep Function: Parameters can be adjusted even in sleep mode.
  • Closed-Loop Sensor: Microcomputer zero-crossing triggered temperature control ensures rapid heating, high temperature stability, and precise adjustment unaffected by air volume.
  • Brushless Vortex Fan: Adjustable air volume with a wide range (1-200L/min) for various purposes.
  • Automatic Cooling: System includes a large air volume cooling function to extend heating element life and protect the hot air handle.
  • Wired Control Handle: Features a cold air key and four temperature/air volume keys for direct control.
  • Roc Curve Mode: Allows presetting of three working sections for preheating temperature, air volume, and heating time, reducing extreme temperature errors.
  • Hot-Swappable Heating Element: Includes 7BC (spiral air + straight air) and 11AC (expanded outlet for larger heating area) for precise desoldering and soldering.
  • Three Large-Screen Intelligent Digital Displays: Shows set temperature, real-time temperature, and air volume.
  • Four-Level Memory Storage: Quickly save and recall preferred settings.
  • Dual-Station Sleep Adjustment Bracket: Detachable bracket for quick nozzle changes without waiting for high temperatures.
  • Accessory Silicone Storage Groove: Integrated into the body with three-dimensional heat dissipation louvers, capable of holding five nozzles and a screwdriver.

3. Specifications

ParameterValue
Model NumberSUGON-8650pro
Power1300W
Power SupplyAC110V 50HZ/60HZ, AC220V 50HZ/60HZ
Temperature Range100°C - 550°C (212°F - 1022°F)
Airflow Range1-200 L/min
Product Size250 × 250 × 160 mm
CertificationCE, FCC

4. Package Contents

Upon receiving your package, please verify all contents against the list below. If any parts are missing or damaged, contact your supplier immediately.

  • SUGON 8650Pro Host × 1
  • 11b Integrated Core × 1
  • Wind Nozzles × 9 (including 17mm/15mm large nozzles, 10mm/8mm/5mm angled nozzles)
  • 252 Bracket × 1
  • Heating Core × 2
  • Instruction Manual × 1
  • Power Cord × 1
  • 252 Wind Gun Rack Assembly Conversion Parts × 4
SUGON 8650Pro Rework Station with dimensions and various nozzles
Figure 1: SUGON 8650Pro Rework Station with dimensions and included nozzles.
SUGON 8650Pro Rework Station with handle and nozzles, highlighting 1300W power
Figure 2: Main unit, handle, and various nozzles.

5. Getting Started (Setup)

  1. Placement: Place the thermal de-soldering station on a flat, stable workbench.
  2. Nozzle Installation: Select the appropriate nozzle for your task and install it onto the hot air gun handle. For general use, a large diameter nozzle is recommended.
  3. Handle Placement: Rest the handle securely on the handle stand.
  4. Power Connection: Connect the power cord to the unit and a suitable power outlet. Turn on the main power switch.
SUGON 8650Pro Rework Station ready for use
Figure 3: SUGON 8650Pro Rework Station with handle and nozzles.

6. Operating Instructions

6.1 General Operation

  1. Power On: After connecting the power, turn on the main power switch.
  2. Start Working: Remove the handle from the air gun frame. The system will enter normal working state, and the display will show the 'set temperature' and 'actual temperature'.
  3. Sleep Mode: When work is completed, place the handle back on the handle rack. The station will automatically enter cold air cooling mode. Once the temperature drops below 100°C, it enters dormant state.
  4. Wake Up: Remove the handle from the rack to resume normal operation.

6.2 Temperature and Air Volume Adjustment

The main unit features controls for precise temperature and air volume adjustments. The wired handle also provides direct control.

Multifunctional menu display with set temperature, real-time temperature, and air volume
Figure 4: Main unit display and controls.
Wired handle with temperature and air volume keys, and cold air key
Figure 5: Wired handle controls.

Temperature Setting:

  • Increase Temperature: Press 'TEMP ▲' (1X) for 1°C increments. Hold for rapid increase. Press 'TEMP ▲' (10X) for 10°C increments. Hold for rapid increase.
  • Decrease Temperature: Press 'TEMP ▼' (1X) for 1°C decrements. Hold for rapid decrease. Press 'TEMP ▼' (10X) for 10°C decrements. Hold for rapid decrease.

Air Volume Setting:

  • Increase Air Volume: Press 'AIR ▲' (1X) for 1-level increments. Hold for rapid increase. Press 'AIR ▲' (5X) for 5-level increments. Hold for rapid increase.
  • Decrease Air Volume: Press 'AIR ▼' (1X) for 1-level decrements. Hold for rapid decrease. Press 'AIR ▼' (5X) for 5-level decrements. Hold for rapid decrease.

Handle Direct Control:

Press and hold the cold air key on the handle for 3 seconds to directly set temperature and air volume. Use CH1/CH2 for temperature and CH3/CH4 for air volume. Press and hold the cold air key for 3 seconds again to exit.

6.3 Memory Functions

  • Storing Settings: After setting desired parameters, select a channel (CH1, CH2, CH3, or CH4). Long press the respective channel button (e.g., CH1) to save the modified data to that channel.
  • Recalling Settings: To recall saved settings, short press the desired channel button (e.g., CH1).

6.4 Operating Modes

The station offers three distinct operating modes:

  • General Mode: This mode is suitable for most common soldering/desoldering tasks with minimal temperature surge.
  • High-Speed Mode: Designed for tasks requiring high efficiency. Temperature will surge slightly then quickly return to the set temperature.
  • Roc Curve Mode: This mode utilizes two preheating stages before reaching the working temperature, significantly reducing damage to components. It requires the dedicated handle fixing bracket. You can preset temperature, air volume, and heating time for three working intervals. After each stage, it automatically proceeds to the next, minimizing temperature errors.
Roc curve mode diagram showing three stages of heating
Figure 6: Roc Curve Mode heating stages.

6.5 Nozzle Replacement

Note: Always ensure the handle has cooled down and the power is turned off before replacing nozzles.

  1. Carefully remove the current nozzle from the handle.
  2. Select the desired nozzle and firmly insert it onto the handle.
Video 1: Product demonstration showing nozzle replacement and operation.

6.6 Handle Replacement

Note: The handle should be replaced only after it has cooled and the power is turned off.

  1. Open the protective case and remove the screws using the provided hexagonal screwdriver.
  2. Pull out the old handle firmly.
  3. Insert the new handle (ensure the arrow on the handle points forward).
  4. Reinstall the screws and protective case.

7. Maintenance

  • Regular Inspection: Periodically check the unit for any damage, especially the power cord and handle wiring. Do not use if damaged.
  • Cleaning: Keep the air outlet clear of obstructions. Regularly clean the unit to prevent dust buildup.
  • Storage: If the station will not be used for a long time, unplug it from the power source and store it in a safe, dry place.

8. Troubleshooting and Error Codes

The display may show specific codes to indicate issues:

  • "HEA" Display: Indicates a problem with the heating element of the de-soldering station. Detection and repair of the thermal body and related parts are required.
  • "EAP" Display: Indicates a problem with the sensor part of the de-soldering station. The sensor device and related parts need to be checked.
  • "FAN" Display: Indicates a fan malfunction. The fan and related parts need to be detected and repaired.

8.1 Limit Error Conditions

Errors can occur when temperature and air volume are set to extreme limits:

  • Extreme Air Volume: If temperature and air volume are set to their limits, the temperature may be significantly affected by the high air volume, leading to errors. Reduce air volume to allow proper temperature rise.
  • Excessive Air Volume: Too much air volume can cause the heating core to cool rapidly, delaying the normal temperature rise rate.
  • High Temperature / Low Air Volume: If temperature is too high and air volume too low, the metal tube of the handle may oxidize and discolor quickly, and the handle may become hot. This accelerates product aging and increases the risk of damage to the heating core and handle.
  • High Air Volume / Low Set Temperature: If air volume is too high and the set temperature is low, the actual temperature may deviate from the set temperature due to rapid heat dissipation by the wind.

9. User Tips

  • Nozzle Changing: If you find changing tips challenging, especially when cold, try heating them for about 20 seconds before fitting them. This can make them easier to attach due to metal expansion.
  • Professional Use: This station is highly recommended for professional engineers due to its performance and complete accessory set.
  • Unboxing: It is advisable to record a video while unboxing the product to document its condition and contents upon arrival. This can be helpful in case of any discrepancies or damage.

10. Warranty and Support

For any technical support, warranty claims, or service inquiries, please contact your original point of purchase or the manufacturer's customer service. Keep your purchase receipt and product information handy.

© 2024 SUGON. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.