1. Introduction
The DSPIAE Moisturizing Color Mixing Tray is specifically designed for acrylic paints, offering great endurance for moisturizing and ensuring paints are ready for use upon opening. This innovative palette helps keep your water-based pigments fresh for extended periods, enhancing your model painting experience.

2. Setup Instructions
To ensure optimal performance and long-term moisturizing, follow these steps for initial setup:
- Prepare the Water Storage Sponge:
Gently rub the water storage sponge in clean water and allow it to soak thoroughly until fully saturated. Squeeze out any excess air to ensure maximum water absorption.

Image illustrating how to gently rub and soak the water storage sponge in water. - Assemble the Tray Layers:
Place the saturated water storage sponge into the bottom of the thickened ABS tray. Next, lay the water induction paper on top of the sponge. Finally, place the color mixing paper on the very top. Ensure the shiny side of the color mixing paper (PET film side) faces upward.

Diagram showing the layers: Color Mixing Paper, Water Induction Paper, and Water Storage Sponge. 
Illustration of the correct orientation for the color mixing paper: shiny side up, dull side down. - Initial Water Injection:
Utilize the top water injection design located on the upper right corner of the tray to add water. This allows for convenient water injection without needing to peel off the color mixing paper.

Image demonstrating the top water injection port and hidden hinges for smooth operation.
3. Operating Instructions
Once the tray is set up, you can begin using it for your painting projects:
- Mixing Paints:
Dispense your water-based acrylic paints onto the color mixing paper. The water storage sponge below will continuously transfer moisture via inductive layers, keeping your paints fresh and workable for extended periods. Paints can remain fresh for up to one month under test conditions.
- Using the Removable Color Tray:
The palette includes a removable color tray made of polished PP plastic. This tray can be used for holding small amounts of paint or for collecting used decal backing paper, making cleanup easier.

Image showing the removable color tray, its use for collecting decal backing paper, and the finger notch for easy access. - Space-Saving Design:
The cover of the tray features hidden hinges and can be folded underneath the main tray when in use, saving valuable workspace.
4. Maintenance
Proper maintenance ensures the longevity and effectiveness of your moisturizing palette:
- Cleaning:
The paint storage and mixing areas, including the removable color tray, are designed for easy cleaning. Simply wipe them clean after each use.
- Replacing Paper:
The color mixing paper is not designed for repeated use. For best results, replace it with a new piece after each painting session. Water induction paper and color mixing paper are available separately for purchase.

Image showing separately available water induction paper (MP-02 PRO) and color mixing paper (MP-03 PRO, MP-05 PRO).
5. Precautions and Troubleshooting
To prevent common issues and ensure the best performance from your palette, please observe the following precautions:
- Use only purified water to avoid breeding bacteria and/or mildew.
- An anti-fungal agent may be used to eliminate mildews if necessary.
- Avoid storing the tray in circumstances with temperatures higher than 40°C.
- The color mixing plate should avoid exposure to direct sunlight for the best result.
- Pay attention to the water level to avoid paints drying out.
- This product is designed for acrylic paints and other water-based colors; it is not suitable for enamels and lacquer paints.

6. Specifications
| Attribute | Detail |
|---|---|
| Brand | DSPIAE |
| Product Name | Moisturizing Color Mixing Tray For Acrylic Paints |
| Model | MP-01 PRO |
| Material | ABS & PP |
| Measurements | 30mm x 158mm x 245mm |
| Net Weight | 275 ± 15g |
| Recommended Age | 14+ years |
| Origin | Mainland China |
7. User Tips
- For best results, always ensure the water storage sponge is fully saturated before placing the papers.
- Regularly check the water level and replenish as needed to prevent paints from drying out prematurely.
- While designed for acrylics, some users find success with other water-based mediums; however, avoid oil-based paints, enamels, and lacquers as they are incompatible with this system.
8. Warranty and Support
For any product inquiries, technical support, or warranty information, please contact the manufacturer or your retailer. Keep your purchase records for reference.