Introduction
The Jebao ECP-180M Variable Frequency Cross Flow Pump is an advanced wave-making and circulation pump designed for both marine and fresh water aquariums. It features a unique double impeller structure, variable frequency control, and intelligent WiFi/Bluetooth connectivity to create diverse and natural wave patterns. This manual provides essential information for the safe and efficient operation of your ECP-180M or ECP-180 pump.
Product Features
- Variable Frequency Technology: Allows for precise control over flow rate and wave patterns.
- Cross Wave Double Impeller Structure: Ensures strong, uniform water flow with no dead spots.
- Ultra-Quiet Operation: Utilizes SINE wave technology for a low noise level of approximately 28dB.
- Smart Control (ECP+M Series): Integrated WiFi and Bluetooth for remote operation via a mobile app. Supports AP mode (no router required).
- Multiple Wave Modes: Includes Classic, Pulse, Sine, Constant Current, Random, and Feeding modes to simulate natural aquatic environments.
- Intelligent Timing: Schedule different wave modes throughout the day for dynamic aquarium conditions.
- Intelligent Night Mode: Self-recognition via photosensitive detection to automatically switch to low-power operation at night.
- Master/Slave Wireless Control: Allows multiple pumps to be synchronized for complex flow patterns.
- Safety Features: IC electronic detection, dry/locked rotor protection, and automatic power-off upon no water.
- Safe Low Voltage: Operates on DC 24V, converting from 220V high voltage to prevent electric leakage.
- Energy Efficient: Designed for high efficiency and energy savings, consuming approximately 210 kWh per year.
- Durable Design: No exposed copper elements, suitable for both marine and fresh water environments.
Setup Instructions
- Unpacking: Carefully remove all components from the packaging. Ensure all parts are present: pump unit, controller, power adapter, and power cord.
- Placement: Position the pump inside your aquarium. The cross-flow design ensures water circulation without dead spots. For optimal wave making, place the pump on the side of the tank, ensuring it is fully submerged and clear of obstructions. The magnetic mount is suitable for glass thickness up to 19mm.
- Assembly: If the pump unit is disassembled (as shown in the maintenance section), reassemble the impellers and housing.
- Connection:
- Connect the pump unit cable to the controller.
- Connect the power adapter cable to the controller.
- Plug the power adapter into a suitable wall outlet. Ensure the plug type (US, EU, UK, AU) matches your region.
Connection Diagram 
Available Plug Types - Initial Power-On: Once connected, the pump will power on. Observe for proper operation and water flow.
Operating Instructions
The Jebao Cross Flow Pump offers both manual button control and smart app control (for ECP+M series).
Controller Functions (ECP-180M / ECP-180)
- M1/M2/M3: Memory buttons for saving and recalling preferred settings.
- M/S: Master/Slave mode selection for synchronizing multiple pumps.
- MODE: Cycles through different wave-making modes.
- FREQ: Adjusts the frequency or intensity of the selected mode.
- FEED: Activates feeding mode, temporarily suspending wave generation.
- WIFI/BT (ECP+M only): Toggles WiFi or Bluetooth connectivity for app control.
Wave-Making Modes
The pump offers various modes to simulate natural aquatic environments:
- Wave-making mode: Simulates natural ocean waves.
- Tidal mode: Gradual power output water flow, continuously circulating from small to large.
- Constant-Current mode: Continuous and fixed output water flow, wave and current are flat and stable.
- Feeding mode: Automatically works after 10 minutes of suspension during feeding.
- Turbulence mode: The water output is maximized, resulting in strong turbulence and wave generation.
- Night mode: Automatic recognition of photosensitive detection, automatic low-gear (power) operation at night.
Smart App Control (ECP+M Series)
For ECP+M models, download the official Jebao app to unlock advanced features:
- WiFi/Bluetooth Connectivity: Connect your pump to the app for remote control.
- Intelligent Timing: Schedule different wave-making modes and intensities throughout the day. The app allows for precise customization of your aquarium's flow patterns.
- Multi-Device Control: Control up to 32 different devices with wireless linkage, creating a highly realistic natural water area.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your pump.
- Cleaning: Periodically remove the pump from the aquarium and disassemble it for cleaning. Rinse all components with clean water to remove algae, debris, and mineral buildup. Use a soft brush if necessary.
- Impeller Inspection: Check the impellers for any signs of wear or damage. Ensure they spin freely and are not obstructed.
- Reassembly: After cleaning, carefully reassemble the pump components. Ensure all parts are securely fitted before returning the pump to the aquarium.
Troubleshooting
If you encounter issues with your pump, refer to the following common problems and their solutions:
| Error Code | Description | Possible Cause / Solution |
|---|---|---|
| ER01 | Software Overcurrent Protection | Internal software detected excessive current. Restart the pump. If persistent, contact support. |
| ER02 | Hardware Overcurrent Protection | Hardware detected excessive current. Check for blockages or damage to the impeller. |
| ER03 | Overheating Protection | Pump is overheating. Ensure proper water flow around the pump for cooling. Check for blockages. |
| ER04 | Undervoltage Protection | Input voltage is too low. Check power adapter and wall outlet. |
| ER05 | Overvoltage Protection | Input voltage is too high. Ensure correct power adapter is used. |
| ER06 | Rotor Clogging Protection | Impeller is clogged. Disassemble and clean the pump thoroughly. |
Specifications
| Feature | Specification |
|---|---|
| Model Numbers | ECP-180 / ECP-180M |
| Power (W) | 65W |
| Flow Rate | 13200 - 33000 L/H |
| Voltage | DC 24V |
| Recommended Fish Tank Size | 1.5 - 1.8 meters |
| Max. Magnetic Attraction Thickness | ≤ 19 MM |
| Dimensions (L*W*H) | 340 * 82 * 52 MM |
| Noise Level | Approx. 28dB |
| Structure | Submersible Pump |
| Origin | Mainland China |
| Control | External Controller (Manual), WiFi/Bluetooth App (ECP+M Series) |
User Tips
- Optimal Placement: Experiment with pump placement within your tank to achieve the desired flow and wave patterns. The cross-flow design is highly effective at creating broad, even flow.
- Utilize Smart Control: For ECP+M models, leverage the mobile app's intelligent timing feature to automate wave patterns throughout the day, mimicking natural reef environments.
- Regular Cleaning: To prevent rotor clogging (ER06 error) and maintain efficiency, perform routine cleaning of the pump and impellers.
- Feeding Mode: Always use the dedicated feeding mode to temporarily pause water flow, ensuring your fish can eat without food being swept away.
- Night Mode: Take advantage of the intelligent night mode to reduce pump activity and noise during nighttime hours, providing a calmer environment for your aquatic inhabitants.
Warranty and Support
The Jebao ECP-180M/ECP-180 pump comes with a 3-year warranty and lifelong after-sales service. For any technical assistance, troubleshooting beyond the scope of this manual, or warranty claims, please contact the seller or authorized Jebao service center. Please retain your proof of purchase for warranty purposes.
