1. Introduction
The JIKONG JKBMS JK-PB2A16S15P is an advanced active balanced Battery Management System designed for various battery types, including LiFePo4, Li-Ion, and LTO. It is tailored for home energy storage systems, communication base stations, building energy storage, industrial energy storage, and other applications requiring reliable battery management.
This BMS features real-time active energy transfer equalization using a supercapacitor as a medium, ensuring battery consistency, improving battery lifespan, and delaying aging. It supports mobile Bluetooth communication via a dedicated APP (Android and iOS) and PC software for comprehensive monitoring and control.
Key Features:
- Active balancing with 2A continuous balanced current for superior battery consistency.
- Wide single cell voltage range of 1V to 5V with an accuracy of ±5mV.
- Supports balanced cascade for battery packs with more than 24 cells.
- Compatible with LiFePO4, Ternary Lithium, and Lithium Titanate battery types.
- LED status indication.
- Overvoltage, overcurrent, and short circuit protection.
- 4-way temperature detection and MOS temperature detection protection.
- Heating function.
- Multiple communication interfaces: RS485, CAN, RS232, UART.
- Real-time viewing of battery status, voltage, current, temperature, SOC, and cycles via mobile APP and PC software.
- Ability to set and read battery cell data via mobile APP.
- Inverter protocol selection available in the mobile APP.
- Dry contact trigger source and display alarm in mobile APP.

Figure 1: JIKONG Home Energy Storage BMS Overview
2. Specifications

Figure 2: JIKONG Product Specifications Table
General Product Properties:
- Brand Name: JIKONG
- Handware or Smart: SMART BMS
- Type: LI-ION Battery BMS
- Usage Scenario: Power BMS, Energy Storage BMS, 3C Digital BMS
- Balance Function: Active Balanced BMS
- Balance Method: Smart Active Balance 2A
- Charge and Discharge Port: Common Port BMS
- Charging Current: 150A
- Continuous Discharge Current: 150A
- Maximum Discharge Current (MAX 2min): 300A
- Parallel Charging Current Limiting: 10A
- Function: Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
- Battery Type: LiFePO4/Li-ion/LTO
- Bluetooth Function: Andriod, Apple, HarmonyOS support
- Other Interfaces: HEAT/RS485/CAN
- Certification: CE
- Origin: Mainland China
3. Package Contents
The standard package for the JIKONG Home Energy Storage BMS includes the following components:

Figure 3: JIKONG BMS Package Contents
- 1 * BMS Unit
- 1 * Interface Board
- 1 * Adapter Cable A (long 40cm)
- 1 * Adapter Cable B (long 40cm)
- 1 * Adapter Cable C (long 40cm)
- 1 * RS485 Cable (long 40cm)
- 2 * Sampling Line A (long 90cm)
- 2 * Sampling Line B (long 90cm)
- 1 * Sampling Line C (long 90cm)
- 1 * Switch (long 50cm)
- 1 * Heating Adapter Cable (long 15cm)
- 1 * 4.3 inches Touch Screen (Optional, depending on selected SKU)
Video 1: JIKONG BMS Unboxing and Overview
4. Setup & Installation
4.1. Wiring Instructions
Proper wiring is crucial for the safe and effective operation of your JIKONG BMS. Please follow these steps carefully:
- Connect all the cables to their respective ports on the BMS and interface board.
- Insert the main cable into the BMS.
- Connect the B-line and the P-line to the battery.
- Important Note: If your setup includes two B8 cables, only the first B8 line needs to be connected. The second B8 cable does not need to be connected.

Figure 4: BMS Wiring Diagram for 16-String and 8-String Cells
4.2. Display Connection (if applicable)
If your model includes a 3.2-inch or 4.3-inch LCD display, connect it using the provided display cable adapter. The display provides real-time battery information.

Figure 5: JIKONG 3.2 inch Display Overview

Figure 6: JIKONG 4.3 inch Touch Screen Display
To power on or off the BMS using the switch key, perform a long press on the button.

Figure 7: JIKONG Switch Key
5. Operating Instructions
5.1. Mobile APP Operation
The JIKONG BMS can be easily managed and monitored via its dedicated mobile application, available for Android and iOS devices. The APP provides a personal lithium battery steward, offering clear and comprehensive information at a glance.
- Real-time Data: View voltage, current, temperature, State of Charge (SOC), alarms, and cycle counts.
- Settings: Adjust multiple protection values such as overcharge, over-discharge, overcurrent, temperature, and balance.
- Inverter Protocol: Easily select and configure mainstream inverter communication protocols directly from the APP.
- Battery Cell Data: Set and read individual battery cell information.
- Alarms: Receive and view dry contact trigger source and display alarms.

Figure 8: Mobile APP Protocol Selection

Figure 9: Mobile APP Data Display
5.2. PC Software Operation
For more detailed monitoring and control, the JIKONG BMS supports PC computer monitoring via RS485/CAN communication. This allows for comprehensive data logging and advanced parameter adjustments.

Figure 10: PC Software Interface for Monitoring and Control
5.3. Active Balancing
The JIKONG BMS employs active balancing technology, also known as lossless balancing. This process involves energy transfer, moving energy from cells with higher energy to cells with lower energy, achieving voltage balance with minimal energy loss. This continuous balancing operates whenever there is a voltage difference above a set threshold, regardless of whether the battery is charging, discharging, or idle, significantly prolonging battery life.

Figure 11: Active Balancing Principle
6. Maintenance
To ensure the longevity and optimal performance of your JIKONG JKBMS and connected battery pack, consider the following maintenance guidelines:
- Regular Monitoring: Periodically check the battery status and parameters via the mobile APP or PC software to identify any anomalies early.
- Firmware Updates: Keep the BMS firmware updated to the latest version to benefit from performance improvements and bug fixes. Refer to the official JIKONG support channels for update procedures.
- Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges to prevent damage.
- Connection Integrity: Regularly inspect all wiring connections for tightness and corrosion. Loose connections can lead to poor performance or safety hazards.
- Cleaning: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquids or abrasive cleaners.
7. Troubleshooting
This section provides guidance on common issues you might encounter with your JIKONG JKBMS.
Common Issues & Solutions:
- No Power/Display Not Working:
- Check all power connections to ensure they are secure.
- Verify the battery voltage is within the operating range of the BMS.
- If using an external switch, ensure it is correctly connected and functioning (long press to activate).
- Balancing Not Occurring or Ineffective:
- Ensure all sampling lines are correctly connected to each cell.
- Check the voltage difference between cells via the APP/PC software; balancing only activates when a threshold is met.
- Verify the active balancing current setting in the APP/PC software.
- Over-Protection Triggered (Overcharge, Over-discharge, Overcurrent):
- The BMS is functioning as designed to protect your battery. Identify the cause of the over-condition (e.g., charger voltage too high, load current too high, battery discharged too deeply).
- Review and adjust protection parameters in the APP/PC software if necessary, but always ensure they are within safe limits for your battery chemistry.
- Communication Issues (Bluetooth/RS485/CAN):
- Bluetooth: Ensure Bluetooth is enabled on your mobile device and the BMS is within range. Restart the APP and/or BMS.
- RS485/CAN: Check physical cable connections. Verify the correct communication protocol is selected in the APP/PC software.
- Temperature Alarms:
- Ensure the BMS and battery are operating within their specified temperature ranges.
- Check for proper ventilation around the BMS and battery pack.
- If the heating function is enabled, ensure it is operating correctly in cold conditions.
For persistent issues not covered here, please refer to the detailed instruction manual provided with your product or contact JIKONG customer support.
8. User Tips
While no specific user reviews or Q&A were provided, here are some general tips for optimizing your JIKONG JKBMS experience:
- Initial Setup Verification: Double-check all wiring connections before powering on the BMS for the first time. Incorrect wiring is a common cause of initial setup problems.
- Software Updates: Regularly check for updates to the mobile APP and BMS firmware. Updates often include performance enhancements, new features, and bug fixes.
- Parameter Customization: Take advantage of the APP and PC software to customize protection parameters to perfectly match your specific battery pack and application requirements.
- Data Logging: Utilize the data logging features to monitor battery health and performance over time, which can help in proactive maintenance and troubleshooting.
9. Warranty & Support
For warranty information, technical support, or service inquiries, please contact JIKONG customer service through their official channels. Ensure you have your product model number and purchase details available when seeking support.