1. Introduction
The JIKONG Lithium Battery Active Balance Protection Board (BMS) is a sophisticated management system designed for large-capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high-current active balancing, overcharge, over-discharge, overcurrent, and over-temperature protection, coulomb metering, and Bluetooth communication. This BMS is suitable for various battery types, including LiFePo4 and Li-Ion.
The protection board utilizes energy transfer active balancing technology to achieve a maximum continuous balance current of 1A or 2A, significantly improving battery consistency, extending battery life, and delaying aging. It features a compact design, simple operation, and comprehensive functionality, making it ideal for high-power energy storage, base station backup power supplies, and solar power station battery packs.



2. Setup and Installation
2.1. Packing List
Before installation, please verify that all components are present:

2.2. Wiring and Connections
The JK-PB1/2A16S-10/15/20P series protection board is suitable for 7-16 series lithium battery packs. The specific wiring method varies depending on the number of cells in the battery pack. Always ensure all cables are connected correctly and securely.
- Connect all the cables.
- Insert the cable into the BMS.
- Connect the B-line and the P-line to the battery.
- Please note that there are two B8 cables. Only the first B8 line needs to be connected. The second B8 cable does not need to be connected.

2.3. Interface Board Functions
The interface board, included as standard, provides LED indicators, a reset switch, DIP switches, dry contacts, and communication functions. These features assist users in monitoring the BMS status and configuring settings.

2.4. Device Activation
Before powering on the protection board, double-check that the balance cables are properly connected and that P- and B- are correctly connected. Ensure the protection board is securely fixed to the battery core. Incorrect connections can lead to abnormal operation or damage.
The protection board does not have a physical power-on switch. It is designed for charging activation mode, meaning the charger voltage must be 2V higher than the battery voltage. After battery assembly, connect the charger to activate the board. Key activation and display activation are also supported: simply connect the display screen and press its button to activate.
2.5. Parallel Function Setup
The parallel function allows simultaneous monitoring of multiple BMS units via an upper computer using the RS485 bus. This requires a USB to RS485 serial port cable and Jikong upper computer software.
Each BMS needs a unique address (0-15). BMS with address 0 acts as the host, and addresses 1-15 are slaves. The address is set using the DIP switches on the interface board.
DIP Switch Settings for Address:
| Address | 1 | 2 | 3 | 4 |
|---|---|---|---|---|
| 0 (Host) | OFF | OFF | OFF | OFF |
| 1 | ON | OFF | OFF | OFF |
| 2 | OFF | ON | OFF | OFF |
| ... | ... | ... | ... | ... |
| 15 | ON | ON | ON | ON |
ON indicates the DIP switch is in the ON position, OFF indicates the OFF position.

3. Operation
3.1. APP and Display Operation
The BMS features a mobile APP (Android and iOS compatible) and a 4.3-inch touch screen display for monitoring and control. The APP can be obtained by scanning the QR code below. Android Version 7 or higher is required.




3.2. Active Equalization
The BMS employs active equalization to transfer energy from high-voltage cells to low-voltage cells. Before using this function, set basic battery parameters (number of cells, capacity, trigger equalization differential pressure, voltage calibration, current calibration) via the JIKONG BMS APP. The default balance current is 1A or 2A. It is recommended that the balance current not exceed 0.2C of the battery capacity. The balancing switch can be turned off in the APP if not needed.
3.3. Heating Function
The BMS includes a heating function to warm the battery in low-temperature conditions using resistance heaters or heating films. This prevents reduced battery activity and ensures proper charging/discharging. The designed heating current is 10A. Users can switch this function on/off via the APP. It is recommended to use a normally closed temperature switch (45-65°C) in series with the heating circuit as a secondary protection.3.4. Dry Contact Function
Two dry contacts are provided to control external devices like alarms or fans. When the BMS detects an over-temperature, overcharge, or over-discharge state, the alarm interface can switch the dry contact status to activate a buzzer or fan. Users can select two trigger conditions based on their requirements and configure them in the APP.
3.5. Communication Function
The BMS supports CAN and RS485 communication. The default CAN communication rate is 250K. Users can select the appropriate inverter protocol in the APP. There are two RS485 interfaces: RS485-1 for inverter communication and RS485-2 for parallel connection and communication with an upper computer. The default baud rate is 115200. Communication addresses (0-15) can be set via DIP switches.
3.6. Intelligent Sleep Function
The intelligent sleep function, enabled/disabled via the APP, conserves battery energy by shutting down the protection board when it's in standby (charging/discharging current less than 1A for 26 consecutive hours). The BMS can be reactivated by pressing a button or connecting a charger.
4. Maintenance
To ensure optimal performance and longevity of your JIKONG BMS, regular monitoring and proper environmental conditions are crucial. Keep all connections secure and free from corrosion. Regularly check the battery status via the mobile APP or LCD display for any alerts or abnormal readings. While no specific cleaning instructions are provided, it is advisable to keep the unit free from dust and moisture.
5. Troubleshooting and Protection Features
The JIKONG BMS is equipped with multiple protection mechanisms to safeguard your battery system. When a protection event occurs, the BMS will take action and attempt to recover automatically once conditions return to normal.
5.1. Overcharge Protection and Recovery
The BMS protects against overcharging. If any battery cell's voltage exceeds the set overcharge protection voltage during charging, the BMS will stop charging. Charging will resume once all cell voltages drop below the overcharge recovery voltage.
5.2. Undervoltage Protection and Recovery
During discharge, if any battery cell's voltage falls below the set undervoltage protection voltage, the BMS will stop discharging. Discharge will resume once all cell voltages rise above the undervoltage recovery voltage. If any cell voltage drops below the automatic shutdown voltage, the BMS will shut down to protect the battery.5.3. Overcurrent Protection and Recovery (Charge/Discharge)
If the charging or discharging current exceeds the set continuous current for a specified delay, the BMS will trigger overcurrent protection and stop the respective operation. It will resume once the current returns to normal after the overcurrent release time.
5.4. Overtemperature Protection and Recovery
The BMS monitors battery temperature. If the temperature exceeds the set over-temperature protection value (for charge or discharge), the BMS will stop the corresponding operation. It will resume once the temperature drops below the recovery value.
5.5. Low Temperature Protection and Recovery
If the battery temperature falls below the set low-temperature protection value during charging, the BMS will stop charging. Charging will resume once the temperature rises above the recovery value. For extremely cold environments, using the heating function is recommended.
5.6. Short Circuit Protection and Recovery
The BMS includes short-circuit protection. If a short circuit is detected, the BMS will immediately stop operation. Recovery occurs automatically after a set delay once the short circuit is resolved. If connecting a charger or load for the first time and a short circuit is triggered, increasing the short circuit protection delay in the APP may help, as high inrush currents can sometimes trigger this protection.
5.7. Emergency Switch
In situations like over-temperature, over-discharge, over-charge, or dropped strings, activating the emergency switch via the APP will force the BMS to enable charging and discharging for 30 minutes. This provides a critical window for emergency use, even if a single cell voltage reaches the automatic shutdown threshold.
5.8. APP Monitoring and Diagnostics
The mobile APP and PC software provide real-time monitoring of various parameters, including voltage, current, temperature, SOC, alarms, and cycle counts. This allows for quick identification of issues and adjustment of protection parameters.
6. Specifications
6.1. General Product Properties
- Brand Name: JIKONG
- Type: LiFePo4 Battery BMS
- Handware or Smart: SMART BMS
- Balance Function: Active Balanced BMS
- Charge and Discharge Port: Common Port BMS
- Function: Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
- Certification: CE
- Origin: Mainland China
- High-concerned chemical: None
- Usage Scenario: Power BMS, Energy Storage BMS, 3C Digital BMS
6.2. Technical Parameters

| Parameter | Value | Unit |
|---|---|---|
| Supply Voltage | 20-70 | V |
| Standby Power Consumption | 12 | mW |
| Operating Power Consumption | 1100 | mW |
| Operating Temperature | -30 to 70 | °C |
| Max. Number of Collection Strings | 16 | S |
| Max. Balancing Current | 1 or 2 | A |
| Charging Current (JK-PB2A16S30P) | 300 | A |
| Discharge Current (JK-PB2A16S30P) | 300 | A |
| Max. Instantaneous Current (JK-PB2A16S30P) | 400 | A |
| Max. Internal Loop Resistance (20P) | 0.35 | mΩ |
| Protective Plate Size | 300x100x24 | mm |
| Finished Weight | 1000 | g |
6.3. Product Dimensions

7. User Tips
- Default Passwords: The Bluetooth default password is
1234. The default password for parameter settings is123456. Remember to change these for security. - Communication: If you encounter any issues or have questions, reaching out to the manufacturer's support team can be very helpful. Users have noted good communication from the seller.
- APP Compatibility: Ensure your mobile device meets the minimum requirements (Android Version 7 or higher) for the JIKONG BMS APP.
- Wiring Verification: Always double-check all wiring connections, especially the balance cables and main power lines (P- and B-), before activating the BMS to prevent damage.
8. Warranty and Support
For detailed information regarding warranty terms, technical support, and service, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download and contains in-depth instructions and specifications:
Reference: JIKONG Lithium Battery Active Balance Protection Board Maintenance Manual (PDF)
For any inquiries or assistance, please contact JIKONG customer support. They are ready to assist you with any questions or issues you may have.