HGLRC SPECTER F722 40A

Contents

HGLRC SPECTER F722 40A 6 Channel AIO Flight Controller User Manual

Model: SPECTER F722 40A

1. Introduction

The HGLRC SPECTER F722 40A 6 Channel AIO (All-In-One) Flight Controller is a high-performance integrated solution designed for FPV drones, particularly those utilizing Y6, six-axis, and other mixed control configurations. This compact unit combines both flight control and Electronic Speed Controller (ESC) functionalities, simplifying wiring and installation for a cleaner build.

Video 1: HGLRC SPECTER F722 40A AIO Flight Controller Product Overview

2. Key Features

  • Integrated Design: Combines flight control and ESC into a single, compact unit, eliminating complex wiring.
  • 6-Channel ESC Output: Supports various mixed control types, including Y6 and six-axis configurations.
  • High Current Capacity: Each ESC channel can withstand up to 40A current, ensuring robust flight performance.
  • HD VTX & Analog VTX Support: Features direct plug compatibility for both HD VTX Air Units and analog VTX terminals.
  • Advanced MCU: Equipped with STM32F722 microcontroller for powerful processing.
  • Precise Gyroscope: Utilizes ICM42688P gyroscope for accurate flight stabilization.
  • Built-in Barometer: Includes a dps310 barometer for altitude hold capabilities.
  • Black Box: Integrated 16MB black box for flight data logging and analysis.

3. Technical Specifications

HGLRC SPECTER F722 40A AIO Flight Controller Product Parameters

Figure 1: Product Parameters Overview

Parameter Value
Name HGLRC SPECTER F722 40A 6 channel AIO
Size 34×48mm
Mounting Hole 25.5×25.5mm, M2
Weight 13.2g
Flight Control MCU STM32F722
Gyroscope ICM42688P
Barometer dps310
Operating Voltage 7.4V—26.1V (2S-6S LiPo)
Max Single ESC Current 40A
Flight Control Firmware HGLRCF722AIO_X6 4.4.3
ESC Firmware F-H-40- Bluejay, 0.19, 48kHz
Black Box 16MB
UARTS 3
HGLRC SPECTER F722 40A AIO Flight Controller Dimensions

Figure 2: Physical Dimensions and Weight

4. Package Contents

The following items are included in your HGLRC SPECTER F722 40A AIO Flight Controller package:

  • 1 × SPECTER F722 40A 4S-6S 6 channel AIO V2 flight controller
  • 1 × 30AWG 70MM single-head SH1.0-7P/single-head SH1.0-6P DJI cable
  • 1 × 30AWG cable length 70MM, single-head GH1.25-6P/single-head SH1.0-7P analog image transmission cable
  • 1 × 30AWG cable length 140mm double-head SH1.0-6P GPS cable
  • 1 × 30AWG cable length 70mm double-head SH1.0-4P receiver cable
  • 1 × 30AWG cable length 60mm single-head SH1.0-3P/single-head SH1.25-3P camera cable
  • 1 × 16AWG cable length 7mm red and black power cable
  • 4 × M2*6.6 Shock-absorbing ball
  • 4 × cup head hexagon socket M2*10 black nickel-plated screws
  • 4 × anti-loosening self-locking M2 nuts
  • 1 × Type-C male and female adapter module
HGLRC SPECTER F722 40A AIO Flight Controller Package Contents

Figure 3: Included Components

5. Setup and Wiring

The HGLRC SPECTER F722 40A AIO is designed for simplified wiring. Refer to the detailed wiring diagram below for proper connections to your FPV drone components such as motors, receiver, VTX, camera, and GPS module.

HGLRC SPECTER F722 40A AIO Flight Controller Wiring Diagram

Figure 4: Detailed Wiring Diagram

5.1 Mounting

Mount the flight controller using the provided M2*6.6 shock-absorbing balls and M2*10 screws. Ensure the board is securely fastened and oriented correctly according to your drone frame and flight controller software settings.

5.2 Initial Connections

  1. Power: Connect the 16AWG red and black power cable to your LiPo battery connector and the corresponding pads on the AIO board. Ensure correct polarity.
  2. Motors: Connect your ESC motor wires to the designated motor pads (M1-M6) on the AIO board.
  3. Receiver: Connect your receiver (e.g., SBUS, CRSF, ELRS) to the appropriate UART port as indicated in the wiring diagram.
  4. Video Transmitter (VTX): Use the provided analog image transmission cable or directly plug in your HD VTX Air Unit to the dedicated VTX port.
  5. Camera: Connect your FPV camera using the provided camera cable to the CAM port.
  6. GPS (Optional): If using a GPS module, connect it to the designated GPS UART port using the provided GPS cable.
  7. USB Connection: Use the Type-C male and female adapter module to connect the flight controller to your computer for configuration via Betaflight or similar software.

6. Operating Instructions

After completing the physical setup, the flight controller needs to be configured using appropriate software (e.g., Betaflight Configurator). This involves:

  1. Firmware Flashing: Ensure the latest stable firmware (HGLRCF722AIO_X6 4.4.3 or newer) is flashed to the flight controller.
  2. ESC Configuration: Configure the ESCs using Bluejay firmware (0.19, 48kHz) or compatible software.
  3. Sensor Calibration: Calibrate the accelerometer and gyroscope.
  4. Receiver Setup: Configure your receiver protocol and channel mapping.
  5. Modes Setup: Assign flight modes (e.g., Arm, Angle, Acro, Horizon) to your radio switches.
  6. PID Tuning: Adjust PID values for optimal flight performance.
  7. OSD Configuration: Set up On-Screen Display (OSD) elements as desired.
  8. Pre-Flight Checks: Always perform thorough pre-flight checks, including motor direction, propeller attachment, and battery voltage, before arming your drone.

7. Maintenance

  • Regular Inspection: Periodically inspect the board for any signs of damage, loose connections, or corrosion.
  • Cleaning: Keep the board clean from dust, dirt, and moisture. Use a soft brush or compressed air for cleaning. Avoid using liquids directly on the board.
  • Firmware Updates: Regularly check for and apply firmware updates to ensure optimal performance and access to new features.
  • Storage: Store the flight controller in a dry, anti-static environment when not in use.

8. Troubleshooting

  • No Power: Double-check battery connections and polarity. Ensure the battery is charged.
  • No Communication with PC: Verify USB cable connection and ensure correct drivers are installed. Try a different USB port or cable.
  • Motors Not Spinning: Check ESC connections, motor direction in software, and ensure the drone is armed correctly. Calibrate ESCs if necessary.
  • Unstable Flight: Re-check sensor calibration. Review PID tuning settings. Inspect propellers for damage or incorrect mounting.
  • Receiver Issues: Confirm receiver is bound to the radio and connected to the correct UART. Verify receiver protocol in flight controller software.
  • Video Feed Problems: Check camera and VTX connections. Ensure VTX is powered and on the correct frequency.

9. User Tips

  • Always perform a dry run of your wiring before applying power to prevent short circuits.
  • Before your first flight, ensure all connections are secure and double-check motor directions in Betaflight.
  • Consider using a smoke stopper during initial power-up to protect components from accidental shorts.
  • Regularly back up your flight controller configuration in Betaflight Configurator.

10. Warranty and Support

For warranty claims, technical support, or further assistance, please contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty-related inquiries. Detailed support resources, including firmware updates and advanced configuration guides, may be available on the HGLRC official website.

© 2024 HGLRC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.