Introduction
Thank you for choosing the Juson Audio JTA50 Hybrid Stereo Tube Amplifier. This amplifier combines the authentic warmth and character of vacuum tubes with the efficiency of a Class AB amplifier, delivering a powerful and natural sonic experience. This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your new amplifier.
Video: Juson Audio JTA50 Product Demonstration and Connection Guide.
Important Safety Information
- Read all instructions carefully before operating the amplifier.
- Keep the amplifier away from water or moisture.
- Do not block ventilation openings. Ensure proper airflow around the unit.
- Do not place near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Use only attachments/accessories specified by the manufacturer.
- Unplug the amplifier during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel.
- Ensure the correct voltage is selected (110V/220V) using the switch on the rear panel before connecting to power.
Package Contents
Verify that all items are present in the package:
- 1x Juson Audio JTA50 Hybrid Stereo Tube Amplifier
- 1x Remote Control
- 1x AC Power Cable
- 1x User Manual

Figure 1: Package Contents
Setup Instructions
1. Unpacking
Carefully remove the amplifier and all accessories from the packaging. Keep the original packaging for future transport or storage.

Figure 2: Packaging Steps
2. Power Connection
- Before connecting the power cable, ensure the voltage selector switch on the rear panel is set to the correct voltage for your region (110V or 220V).
- Connect the supplied AC power cable to the AC Power Input on the rear of the amplifier.
- Plug the other end of the AC power cable into a suitable wall outlet.

Figure 3: Rear Panel with AC Power Input and Voltage Selector
3. Speaker Connection
Connect your passive speakers (4-8 ohm impedance) to the "Speaker Output" terminals on the rear panel. Ensure correct polarity (red to red, black to black) for each channel.
4. Input Connections
The JTA50 offers a variety of input options:
- PHONO Input: For connecting a turntable.
- AUX RCA Input: For general analog audio sources (CD players, tape decks, etc.).
- Bluetooth 5.0: For wireless connection from smartphones, tablets, or other Bluetooth devices.
- OPTICAL Input: For digital audio sources (TVs, game consoles).
- COAXIAL Input: For digital audio sources.
- PC-USB Input: For connecting to a computer as a USB DAC.

Figure 4: Rear Panel Input Connections
Connecting to a Turntable:
- Ensure your turntable is set to phono output signal. If your turntable outputs a line-level signal, connect it to the AUX input instead.
- Remove the covers from the PHONO RCA plugs on the amplifier and connect the turntable's RCA cables to the PHONO input.
- Connect the ground wire of the turntable to the GND terminal on the rear of the amplifier.

Figure 5: Turntable Connection Example
5. Subwoofer Output
The JTA50 features a mono RCA subwoofer output (SW OUT) for connecting an active subwoofer, allowing you to create a 2.1 audio system.
6. Bluetooth Antenna
Attach the provided Bluetooth antenna to the "BT ANTENNA" connector on the rear panel for optimal wireless reception.
Operating Instructions
1. Power On/Off
Press the Power Switch button on the front panel to turn the amplifier on or off. The Power Indicator will illuminate when the unit is on.

Figure 6: Front Panel Controls
2. Input Selection
Use the Source Input Selector buttons (PHONO, AUX, BT, OPT, COAX, PC-USB) on the front panel or the remote control to choose your desired audio source.
3. Volume Control
Adjust the overall output volume using the large Volume Control knob on the front panel or the VOL+/- buttons on the remote control.
4. Tone Controls
The amplifier features independent Bass and Treble control knobs on the front panel to fine-tune the audio to your preference.
5. Headphone Output
For private listening, plug your 6.35mm headphones into the Headphone Output jack on the front panel. When headphones are plugged in, the VU meters will stop flickering as the amplifier prioritizes headphone output.

Figure 7: Headphone Connection
6. Bluetooth Pairing
- Select "BT" as the input source.
- On your Bluetooth device, search for "Juson Audio JTA50" and pair with it.
- Once paired, you can stream audio wirelessly to the amplifier.

Figure 8: Bluetooth Connection Example
7. Remote Control
The included remote control provides convenient access to input selection, volume adjustment, and playback controls.

Figure 9: Amplifier with Remote Control
Maintenance
1. Cleaning
Wipe the amplifier with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners, as they may damage the finish or internal components.
2. Tube Replacement
The JTA50 uses 2*6J9+2*10DXB tubes (or 2*6F1+2*WY-2 in some batches). Tubes have a finite lifespan and may need replacement over time. If you notice a degradation in sound quality or tube failure, consult qualified service personnel for replacement. Ensure the amplifier is unplugged and cooled down before attempting any tube handling.
3. Cooling Fan
The amplifier features a built-in smart cooling fan that operates when the internal temperature exceeds 50 degrees Celsius, ensuring optimal performance and longevity.

Figure 10: Smart Cooling Fan and Vacuum Tubes
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power switch off; Incorrect voltage selected. | Ensure power cable is securely connected. Turn on the power switch. Verify voltage selector is correct. |
| No sound output | Incorrect input selected; Volume too low; Speakers not connected properly; Mute activated. | Select the correct input source. Increase volume. Check speaker connections. Deactivate mute function on remote. |
| Distorted sound | Input signal too high; Faulty cables; Damaged tubes. | Reduce input source volume. Check and replace cables. Consult service for tube inspection/replacement. |
| VU meters stop flickering when headphones are plugged in | This is normal behavior. | The VU meter is designed to recognize only one way output. This is not a defective product. |
| Bluetooth connection issues | Device not in pairing mode; Amplifier not in BT input mode; Interference. | Ensure amplifier is on BT input. Put device in pairing mode. Move closer to amplifier. |
Specifications
| Feature | Detail |
|---|---|
| Brand Name | JUSON AUDIO |
| Model Number | JTA50 |
| Channels | 3 (2.1) |
| Power Output | 65WPC RMS @ 4ohms |
| Maximum Power Per Channel | 65W |
| THD | 1% @ 65WPC |
| Minimum Speaker Impedance | 4 ohms |
| Channel Separation | 50dB |
| Frequency Response | 20-20,000Hz |
| Sub Output | Preout for active subwoofer |
| Bluetooth | Version 5 supports SBC and AAC codecs |
| Media Playback File Support | FLAC, WAV, APE, WMA, MP3 |
| Digital Audio DAC Sample Rate | Up to 16-bit/48kHz |
| Preamplifier Tube | 2*6J9+2*10DXB tubes (or 2*6F1+2*WY-2) |
| Transistors | Toshiba A1941X 2, Toshiba C5198X2 |
| Inputs | Optical, Coaxial, Bluetooth 5.0, 2X Stereo RCA, USB |
| Output | Speaker, Subwoofer, Headphone |
| Power | 110/220 VAC, 50/60 Hz Standard IEC Connection |
| Dimensions | 271x286x166mm |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |

Figure 11: Product Dimensions
User Tips
- Tube Variations: The amplifier may use 2*6J9+2*10DXB tubes or 2*6F1+2*WY-2 tubes depending on the batch. Both configurations offer the same sound quality.
- VU Meter Behavior: When headphones are plugged into the 6.35mm jack, the VU meters will stop flickering. This is normal and not an indication of a defect, as the amplifier's current design prioritizes the headphone output.
- Sound Customization: Utilize the independent Bass and Treble controls to tailor the sound to your personal listening preferences and the acoustics of your room.
Warranty and Support
Juson Audio ensures that all products undergo 100% inspection at least twice during production and again before shipping to guarantee proper functionality.
Warranty Policy:
- Amplifier Unit: Free repairing service for 24 months from the date of receipt. This excludes man-made damage and/or misuse.
- Tubes: 3 months warranty for the vacuum tubes.
- Reporting Defects: Defective units must be reported with supporting photos, videos, or other evidence and returned within the warranty period.
- Post-Warranty Support: After the warranty expires, Juson Audio teams are available to offer online technical support to assist with product repairs.
For any technical support or warranty claims, please feel free to contact Juson Audio's customer service team. Juson Audio is committed to providing excellent after-sales service.