1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Ainavi Car Multimedia Player. Please read this manual thoroughly before using the product to ensure proper functionality and safety. This device is designed to enhance your driving experience with advanced navigation, entertainment, and connectivity features.
2. Product Contents
The package typically includes the following components:

- Frame + Screen: Available in Style A, B, C, or D, depending on your vehicle's dashboard.
- Power Cable: Specific to the chosen style and vehicle interface.
- USB*2: Two USB cables for connectivity.
- Rear CAM Input: Cable for connecting a rear camera.
- GPS Antenna: For navigation and positioning.
- SIM+4G Antenna: (Only for 4G version) For network connectivity.
Note: Different styles of power cables have different interfaces. The corresponding cables will be sent according to the style you ordered. If your car's original radio has a square plug and is different from the styles shown, please contact customer service for the correct cable.

3. Setup and Installation
The Ainavi Car Multimedia Player is designed for plug-and-play installation. However, professional installation is recommended to ensure correct wiring and avoid damage to your vehicle's electrical system.
3.1. Pre-Installation Check
- Ensure your vehicle is turned off and the battery is disconnected before starting installation.
- Verify that all components listed in Section 2 are present.
- Identify the correct style (A, B, C, or D) that matches your Smart Fortwo's dashboard.

3.2. Connecting Cables
The system is designed for simple plug-and-play connection to your vehicle's existing wiring harness. Ensure all connectors are securely fastened.

3.3. Cable Layout Recommendations
For optimal performance and a tidy installation, follow these cable routing suggestions:
- USB Ports and SIM Card Slot: Route these cables to the storage compartment located on the passenger side.
- GPS and 4G Antennas: Install these either on the right front portion of the dashboard or within the A-pillar. To optimize signal reception, position the antenna module's black side facing upwards.

3.4. Steering Wheel Control (SWC)
The unit supports steering wheel controls. After installation, you can use the buttons on your steering wheel to control the screen, enhancing convenience and safety.

4. Operating Instructions
4.1. Power On/Off
The unit powers on automatically when the vehicle ignition is turned on. To power off, turn off the vehicle ignition.
4.2. Ainavi UI 5.0
Experience a new level of customization with Ainavi UI 5.0. Its intuitive layout combined with editable shortcuts empowers you to create a user interface tailored to your preferences. Enjoy effortless navigation and efficient operation.

4.3. Day and Night Modes
The system supports automatic switching between day and night display modes, adjusting brightness and color schemes for optimal visibility in varying light conditions.

4.4. Wireless CarPlay & Android Auto
Enjoy seamless integration with your smartphone using wireless CarPlay and Android Auto (available on A2, G5, H5, and H6 models). This feature allows hands-free control of calls, music, and navigation directly from the multimedia screen.

Note: The A1 model does not support CarPlay and Android Auto functions.

4.5. Multimedia Entertainment
The unit supports HD video and lossless music playback. Connect to the internet to watch Netflix, YouTube, Disney+, and other video apps.

4.6. Global Positioning System (GPS)
The H6 model boasts advanced positioning with support for GPS, Galileo, GLONASS, and BeiDou satellite systems. This multi-constellation technology delivers faster and more accurate location tracking for precise navigation and route guidance.

4.7. Split Screen Functionality
Multitask effortlessly with split-screen functionality. Run two apps simultaneously on a single screen for enhanced efficiency and productivity, such as navigation and video playback.

4.8. Gyroscope Function
The gyroscope function allows the device to detect the tilt angle of the car during driving, greatly improving driving safety and providing real-time vehicle orientation data.

4.9. Digital Theater System (DTS)
The Digital Theater System provides advanced audio processing capabilities, including a multi-band equalizer (EQ), bass enhancement, and sound field settings to customize your audio experience.

4.10. 4G+5G WiFi Connectivity
G5, H5, and H6 models support built-in 4G LTE, GSM, and WCDMA capabilities. A SIM card slot extension cable can be routed to the passenger storage area. Please note that 4G network compatibility varies by region and some regions may not support them.

5. Specifications
Below are the general specifications for the Ainavi Car Multimedia Player. Specific features may vary by model (A1, A2, G5, H5, H6).
| Attribute | Value |
|---|---|
| Brand Name | Ainavi |
| Operating System | Android 13 |
| Processor Type | Qualcomm |
| Processor Speed | 2.0GHz |
| Chipset | 8 core |
| RAM | 8G |
| ROM | 256G |
| Display Size | 9" |
| Resolution | 1280*720 |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 1.8kg |
| Item Size | 9-inch |
| Max External Memory | 64G |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| Special Features | Support steering wheel control, Support 3G Network, Support 4G Network, Support Can-Bus, Built-in GPS, MP3 players, CarPlay, Android Auto, Split Screen |
| OSD Language | Multi-language support including English, Chinese, German, French, Spanish, etc. |
| Certification | CE, FCC, RoHS, WEEE |
| Material | Glass |
| Suitable for | Mercedes Benz Smart Fortwo 451 453 2005 - 2020 |

5.1. Cooling System
The unit features a built-in cooling fan, providing a maximum of 6000 revolutions per minute. This effectively reduces chip temperature and ensures smoother operation. The optimal operating temperature for the CPU is 30°C - 55°C.

5.2. Display Technology
The A series models employ a glass-to-glass (G+G) lamination process, while the G and H series utilize full lamination. Full lamination improves display quality, reduces reflection, and prevents dust from entering the screen, resulting in enhanced optical performance, more vivid and accurate colors, and a more lifelike image. It also contributes to a faster touch response and a smoother user experience.

6. Maintenance
To ensure the longevity and optimal performance of your Ainavi Car Multimedia Player, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. For stubborn smudges, lightly dampen the cloth with water or a screen-safe cleaner. Avoid abrasive materials or harsh chemicals.
- Software Updates: Periodically check for software updates to ensure you have the latest features and bug fixes. Updates can usually be performed via Wi-Fi.
- Avoid Extreme Temperatures: Do not expose the device to extreme heat or cold, as this can affect its electronic components and screen.
- Cable Management: Ensure all cables are securely connected and not pinched or strained, which can lead to damage or intermittent connectivity.
7. Troubleshooting
If you encounter any issues with your multimedia player, try the following basic troubleshooting steps:
- No Power: Check all power connections. Ensure the vehicle's ignition is on.
- No Sound: Verify volume settings, check speaker connections, and ensure the correct audio source is selected.
- Touchscreen Unresponsive: Try restarting the unit by turning the vehicle off and on. If the issue persists, a factory reset might be necessary (consult support).
- GPS Signal Issues: Ensure the GPS antenna is correctly installed and has a clear line of sight to the sky.
- Network Connectivity Problems: Check 4G antenna connection (if applicable) and Wi-Fi settings. Ensure you are within network coverage.
- CarPlay/Android Auto Not Connecting: Ensure your phone's Bluetooth and Wi-Fi are on, and the device is properly paired. Try restarting both the phone and the multimedia player.
For more complex issues, please contact Ainavi customer support.
8. User Tips
- Optimize Audio: Utilize the Digital Theater System's EQ and sound field settings to tailor the audio output to your preference and vehicle acoustics. Experiment with different presets like Jazz, Vocal, or create custom curves.
- Efficient Multitasking: Leverage the split-screen feature to keep navigation active while enjoying entertainment or other applications, improving driving efficiency.
- Stay Updated: Regularly check for software updates to benefit from new features and performance improvements.
9. Warranty and Support
The Ainavi Car Multimedia Player comes with a 1-year warranty. For warranty claims, technical support, or any product-related inquiries, please contact Ainavi customer service through your purchase platform or the official Ainavi website.
9.1. Certifications
The product is certified with CE, FCC, RoHS, and WEEE, ensuring compliance with international safety and environmental standards.

10. Product Video Overview
Watch this video for a visual overview of the Ainavi H6 model's features and functionalities: