Recordio GAP-DA4450/DA2350

Contents

Recordio GAP-DA4450/DA2350 Class D Professional Digital Amplifier User Manual

Models: GAP-DA4450 (4-Channel, 450W), GAP-DA2350 (2-Channel, 350W)

Recording Music Recording Life.

1. Introduction

Thank you for choosing the Recordio GAP-DA4450/DA2350 Class D Professional Digital Amplifier. This amplifier is designed to deliver high-quality audio performance for various professional applications, including stage events, DJ setups, churches, family karaoke, and outdoor sound systems. This manual provides essential information for safe operation, setup, and maintenance of your amplifier.

2. Safety Information

Please read and understand all safety instructions before operating the amplifier. Retain this manual for future reference.

  • Power Source: Ensure the amplifier is connected to the correct AC voltage (110V or 220V, as specified for your unit).
  • Ventilation: Do not block ventilation openings. Ensure adequate airflow around the unit to prevent overheating. The amplifier features double mesh heat dissipation vents.
  • Moisture: Do not expose the amplifier to rain or moisture. Do not place objects filled with liquids, such as vases, on the apparatus.
  • Cleaning: Unplug the unit from the power outlet before cleaning. Use a dry cloth for cleaning.
  • Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
  • Placement: Place the amplifier on a stable, level surface. Avoid placing it near heat sources or in direct sunlight.

3. Product Overview

The Recordio GAP-DA4450/DA2350 series are Class D digital amplifiers known for their slim body, powerful performance, and robust metal shell. They feature professional XLR interfaces for inputs and versatile output options.

Front Panel Features

Front panel of the amplifier showing controls and indicators
Figure 3.1: Front Panel Controls and Indicators (GAP-DA4450 shown)
  • Power Switch: Main power on/off switch.
  • Channel Volume Knobs: Individual volume control for each channel (A, B, C, D for GAP-DA4450; A, B for GAP-DA2350). These are comfort knobs for precise adjustment.
  • Indicators:
    • PRO (Protection): Illuminates when the amplifier is in protection mode (e.g., due to overheating, short circuit).
    • CLIP (Clipping): Illuminates when the input signal is too high, causing distortion. Reduce input level or channel volume.
    • SIG (Signal): Illuminates when an audio signal is present on the channel.
    • POW (Power): Illuminates when the amplifier is powered on.
  • Heat Dissipation Vents: Front-facing vents for efficient cooling.

Rear Panel Connections

Rear panel of the 4-channel amplifier showing input and output connections
Figure 3.2: Rear Panel Connections (GAP-DA4450)
  • AC Input: Power cable connection.
  • CH A/B/C/D Input (XLR): Professional balanced audio inputs for each channel.
  • OUT A/B/C/D (SpeakON/XLR Combo): Audio outputs for connecting to loudspeakers.
  • STEREO/PARALLEL Switch: Selects the operating mode for the amplifier channels.
Video 3.1: Demonstration of amplifier front panel indicators and rear connections.

4. Specifications

Table 4.1: Technical Specifications
Feature Specification
Product Name Digital amplifier
Model Number GAP-DA4450 / GAP-DA2350
Brand Name Recordio
Type Professional Amplifier
Class D
Power 450W (GAP-DA4450) / 350W (GAP-DA2350)
Channel 4 (GAP-DA4450) / 2 (GAP-DA2350)
Damping Coefficient 8Ω/1KHZ > 100
Voltage 110V/220V (Optional)
CROSS TALK >100DB@822 1KHZ
Power Source AC
Built-in Battery No
Inbox Adaptor No
Single Package Size 60 x 49 x 11 cm
Single Gross Weight 8.500 kg

5. Setup

Follow these steps to set up your amplifier:

  1. Placement: Position the amplifier in a well-ventilated area, preferably in a standard equipment rack. Ensure the front and side vents are unobstructed.
  2. Power Connection: Connect the AC power cable to the AC input on the rear panel of the amplifier and then to a suitable power outlet. Verify the voltage setting (110V/220V) matches your local power supply.
  3. Input Connections: Connect your audio source (e.g., mixer, preamplifier) to the CH A/B/C/D INPUT XLR connectors on the rear panel using balanced XLR cables.
  4. Output Connections: Connect your loudspeakers to the corresponding OUT A/B/C/D SpeakON/XLR combo connectors on the rear panel. Ensure correct polarity and impedance matching for your speakers.
  5. Mode Selection: Use the STEREO/PARALLEL switch on the rear panel to select the desired operating mode. In STEREO mode, each channel operates independently. In PARALLEL mode, the input signal to CH A is routed to all active channels (for 4-channel models) or CH B (for 2-channel models), allowing a single input to drive multiple outputs.
Rear view of stacked amplifiers with cables connected
Figure 5.1: Example of Rear Panel Connections

6. Operating Instructions

Once the amplifier is properly set up, follow these steps for operation:

  1. Power On: Ensure all volume knobs are set to their minimum (-inf) position. Flip the main power switch on the front panel to the 'ON' position. The POW indicator will illuminate.
  2. Input Signal: Start playing audio from your source. The SIG indicator for active channels should illuminate, indicating a signal is present.
  3. Adjust Volume: Slowly turn up the individual channel volume knobs to the desired listening level. Monitor the CLIP indicators; if they light up frequently or stay lit, reduce the volume to prevent distortion and potential speaker damage.
  4. Monitoring: Observe the PRO, CLIP, SIG, and POW indicators during operation.
  5. Power Off: Before powering off, turn down all channel volume knobs to their minimum position. Then, flip the main power switch to the 'OFF' position.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your amplifier:

  • Cleaning: Regularly clean the exterior of the amplifier with a soft, dry cloth. Avoid using liquid cleaners or solvents.
  • Ventilation: Periodically check that the front and side ventilation grilles are free from dust and debris. Use a soft brush or compressed air to clear any blockages.
  • Connections: Ensure all audio and power connections are secure and free from corrosion. Loose connections can lead to signal loss or intermittent performance.
  • Storage: If storing the amplifier for an extended period, disconnect it from power, clean it thoroughly, and store it in a dry, dust-free environment.

8. Troubleshooting

If you encounter issues with your amplifier, refer to the following common troubleshooting steps:

Table 8.1: Troubleshooting Guide
Problem Possible Cause Solution
No power (POW indicator off) Power cable disconnected; power outlet faulty; amplifier fuse blown. Check power cable connection; test power outlet; contact service for fuse replacement.
No sound output Input/output cables disconnected; volume too low; incorrect mode selection (Stereo/Parallel); source device issue. Check all cable connections; increase channel volume; verify Stereo/Parallel switch setting; check audio source.
Distorted sound (CLIP indicator on) Input signal too high; channel volume too high. Reduce input signal level from source; lower channel volume.
PRO (Protection) indicator on Overheating; speaker impedance too low; short circuit in speaker wiring. Turn off amplifier, allow to cool; check speaker impedance; inspect speaker cables for shorts.
Humming or buzzing noise Ground loop; faulty cables; interference from other equipment. Ensure all equipment is on the same electrical circuit; try different cables; move amplifier away from other electronics.

If the problem persists after trying these solutions, please contact customer support.

9. User Tips

  • Start Low, Go Slow: Always start with volume levels at minimum and gradually increase them to avoid sudden loud noises or damage to speakers.
  • Cable Quality: Use high-quality, shielded cables for all audio connections to minimize noise and interference.
  • Impedance Matching: Ensure your speakers' impedance matches the amplifier's output capabilities to prevent overheating and ensure optimal performance.
  • Rack Mounting: For professional setups, consider rack-mounting the amplifier to protect it and ensure proper ventilation.
  • Power Sequencing: When powering on your audio system, turn on the amplifier last. When powering off, turn off the amplifier first to prevent 'pops' or 'thumps' through your speakers.

10. Warranty and Support

This Recordio amplifier comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

The warranty does not cover:

  • Damage caused by improper installation, misuse, abuse, or neglect.
  • Damage caused by unauthorized modifications or repairs.
  • Damage due to natural disasters or accidents.

For warranty claims, technical support, or any questions regarding your amplifier, please contact Recordio Official Store customer service. Please have your purchase details and model number ready when contacting support.

© 2024 Recordio. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.