1. Introduction
Thank you for choosing the Avhrit Cordless Impact Wrench. This powerful and versatile tool is designed for efficient fastening and loosening of various nuts and bolts, making it ideal for a wide range of applications including car repairs, scaffolding installation, equipment maintenance, and general DIY projects. This manual provides essential information on safety, setup, operation, and maintenance to ensure optimal performance and longevity of your tool.
2. General Safety Instructions
Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.
2.1 Work Area Safety
- Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Keep children and bystanders away while operating a power tool.
2.2 Electrical Safety
- Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
2.3 Personal Safety
- Always wear eye protection and hearing protection.
- Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
- Stay alert, watch what you are doing, and use common sense when operating a power tool.
2.4 Power Tool Use and Care
- Do not force the power tool. Use the correct power tool for your application.
- Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation.
3. Package Contents
Upon unpacking, please ensure all items listed below are present and in good condition:
- Avhrit Cordless Impact Wrench
- 2 x 4000mAh Lithium-Ion Battery Packs (21V)
- Fast Charger
- 5 x Sockets (various sizes)
- Extension Bar
- O-rings
- Carrying Case
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | AVHRIT |
| DIY Supplies | Electrical |
| Max Torque | Up to 850 N.m (630 Ft-Lbs) |
| Max Speed | 2200 RPM |
| Chuck Size | 1/2 inch Heavy Duty |
| Motor Type | Advanced Brushless Motor |
| Battery Type | 21V 4000mAh Lithium-Ion |
| Charging Time | Approx. 1.5 Hours (with Fast Charger) |
| Variable Speeds | 3 settings: 0-1500RPM (500N.m), 0-1800RPM (650N.m), 0-2200RPM (850N.m) |
| Weight (Product Package) | 5.6 kg |
| Package Dimensions (L x W x H) | 18 x 22 x 7 cm |
5. Setup
5.1 Charging the Battery
- Connect the fast charger to a standard power outlet.
- Slide the 4000mAh Lithium-Ion battery pack onto the charger. Ensure it clicks into place.
- The charger's indicator light will show the charging status. A full charge typically takes about 1.5 hours.
- Once fully charged, remove the battery from the charger.
Note: For optimal battery life, fully charge the battery before first use and if storing the tool for an extended period.
5.2 Attaching/Detaching the Battery
- To attach: Align the battery pack with the base of the impact wrench and slide it in until it locks securely.
- To detach: Press the release button(s) on the battery pack and slide it off the tool.
5.3 Installing Sockets
- Ensure the impact wrench is turned off and the battery is removed for safety.
- Push the desired 1/2 inch socket onto the square drive anvil until it snaps into place.
- To remove, pull the socket firmly off the anvil.
6. Operation
6.1 Powering On/Off
- To power on, press the trigger. The tool will start operating.
- To power off, release the trigger.
6.2 Variable Speed Trigger
The impact wrench features a variable speed trigger. The harder you press the trigger, the faster the tool operates, allowing for precise control over speed and torque.
6.3 Forward-Stop-Reverse Switch
A switch located near the trigger allows you to select the rotation direction (forward for tightening, reverse for loosening) or lock the tool in the stop position for safety.
- Forward: Push the switch to the left for clockwise rotation (tightening).
- Stop/Lock: Position the switch in the center to prevent accidental operation.
- Reverse: Push the switch to the right for counter-clockwise rotation (loosening).
6.4 Speed Settings
The impact wrench offers 3 variable speed settings to match the application requirements:
- Low (1): 0-1500 RPM (500 N.m) - For delicate tasks or initial fastening.
- Medium (2): 0-1800 RPM (650 N.m) - For general fastening and loosening.
- High (3): 0-2200 RPM (850 N.m) - For heavy-duty applications requiring maximum torque.
6.5 Built-in LED Light
The integrated LED light automatically illuminates the work area when the trigger is pressed, providing clear visibility in dark or confined spaces.
6.6 Applications
The Avhrit Cordless Impact Wrench is suitable for:
- Car tire repair and removal
- Automotive maintenance
- Scaffolding installation
- Building steel structures
- Equipment repair
- DIY projects and home maintenance
- Product assembly in workshops
7. Maintenance
7.1 Cleaning
- Keep the ventilation slots of the tool clean to prevent overheating.
- Wipe the tool with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
7.2 Battery Care
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Do not short-circuit the battery terminals.
- The battery packs are equipped with Over Heat Protection, Over Charge Protection, and Short Circuit Protection for safety and longevity.
- If not using the battery for a long time, fully charge it before storage to maintain its health.
7.3 Storage
- Store the impact wrench and its accessories in the provided carrying case when not in use.
- Keep the tool in a dry, secure location out of reach of children.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | Battery not charged or improperly installed. Forward-Stop-Reverse switch in 'Stop' position. | Ensure battery is fully charged and correctly installed. Move the switch to 'Forward' or 'Reverse'. |
| Reduced power/torque | Battery charge is low. Incorrect speed setting. | Recharge the battery. Select a higher speed setting. |
| Battery not charging | Charger not plugged in. Faulty battery or charger. | Check power connection. Try another outlet. Contact support if issue persists. |
| Socket falls off | Socket not fully engaged. Worn anvil. | Push socket firmly until it clicks. Inspect anvil for wear. |
9. User Tips
- Always select the appropriate torque setting for the task to avoid overtightening or damaging fasteners.
- For stubborn bolts, apply short bursts of power rather than continuous pressure to help break them loose.
- Utilize the belt buckle feature for convenient carrying when working at heights or moving around a job site.
- Keep spare charged batteries on hand for extended work sessions.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided at the point of purchase or visit the official Avhrit website. Keep your purchase receipt as proof of purchase for any warranty claims.