LEHX L6 PRO

Contents

LEHX L6 PRO Android Auto Carplay Autoradio User Manual

Model: L6 PRO | Brand: LEHX

For Ford Mondeo Fusion MK5 (2013-2018)

1. Introduction

Thank you for purchasing the LEHX L6 PRO Android Auto Carplay Autoradio. This manual provides detailed instructions for the installation, operation, and troubleshooting of your new car multimedia system. Please read this manual thoroughly before installation and use to ensure proper functionality and to avoid any issues.

It is recommended to test the unit before full installation, as products may be affected during transit.

LEHX L6 PRO Android Auto Carplay Autoradio front view

Front view of the LEHX L6 PRO head unit.

2. Compatibility Check

Before proceeding with installation, ensure your vehicle's central control system is compatible with the LEHX L6 PRO unit.

  • If your car's central control is the same as the picture below (Automatic A/C), you can proceed with confidence.
  • If your car has an original large screen, please contact customer service for guidance.
  • This unit does NOT support vehicles with "manual air conditioner" or "SONY" branded systems. Do NOT purchase if your vehicle has these features.
Compatible Automatic A/C central control

Compatible: Automatic A/C central control.

Incompatible Manual A/C and SONY systems

Incompatible: Manual A/C and SONY systems.

3. Setup and Installation

3.1. Package List

Ensure all components are present in your package:

Package list for LEHX L6 PRO

Included components: Machine, Frame, Power Cable, RCA Cable, Camera Input, USB Cable (x2 or x3 for GX9 Pro), GPS Module, 4G SIM RCA (GX9 Plus/GX9 Pro), 4G antenna (GX9 Plus/GX9 Pro), Audio Out (GX9 Pro), MIC-Gift (Optional).

3.2. Rear Interface Description (Wiring Diagram)

Refer to the diagram below for the main power and audio connections.

Rear interface wiring diagram

Detailed wiring diagram for the rear interface.

  • Power Supply:
    • Yellow (B+): Constant Power Supply +12V (memory function).
    • Red (ACC): Ignition Switch.
    • Black (GND): Ground Wire.
    • Orange (ILLUMINATION): Illuminate Backlight.
    • Pink (REVERSE): Reversing camera control line.
    • Brown (KEY2): Steering Wheel Control 2.
    • Orange/black striped (KEY1): Steering Wheel Control 1.
    • Blue (ANT): Auto Antenna Power.
  • Audio/Video Connections:
    • F-CAM (VIDEO-IN-2): Video Input 2 (Front Camera Input).
    • AUX R IN / AUX L IN: Right/Left Audio Input.
    • VIDEO-IN-1 / VIDEO OUT: Video Input 1 / Video Output.
    • FR OUT / FL OUT: Front Right/Left Audio Output.
    • SUB WOOF: Subwoofer Output.
    • MIC: Microphone Input.
    • AMP CONT: Amplifier Control.
    • R-CAM: Reversing Camera Input.

Important: When the yellow line B+ and the red line ACC have a 12V positive power at the same time, the unit can be turned on normally. The yellow line B+ keeps the power on and the machine has a memory function. Eight speaker cables must not be grounded, shared, or touch other lines, otherwise, there will be no sound output, sound distortion, or machine overheating.

3.3. CANBUS Connection

The CANBUS box is used for integrating the head unit with your vehicle's existing systems, such as steering wheel controls and air conditioning. There are different connection methods for high-end and low-end model cars.

CANBUS connection diagram

CANBUS connection for high-end and low-end models.

  • For High-End Model Car: Disconnect the CANBUS.
  • For Low-End Model Car: Connect the CANBUS.

Attention: If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.

3.4. Reversing Camera Installation

Follow these steps to install the reversing camera:

Reversing camera installation method

Diagram for reversing camera wiring.

  1. Connect the yellow cable (1) to the navigation reversing video input socket.
  2. Connect the red cable (2) to the reverse detection line of the navigation adapter (BACK or REVERSE).
  3. Connect cables (3) and (4) together, and then connect them to the positive pole of the reverse light power supply.
  4. Connect the black cable (5) to the body screw (ground) or the negative pole of the reverse light power supply.

Note: If the reversing camera is not installed, do not connect the REVERSE/BACK cable to any place. Leave the cable unconnected. Otherwise, the machine may not display properly or may automatically enter reverse mode, which can cause malfunction. In such a situation, disconnect the REVERSE/BACK line as soon as possible to avoid affecting normal use.

3.5. Steering Wheel Control Learning

To configure your steering wheel controls:

Steering wheel control learning interface

Interface for learning steering wheel controls.

  1. Press and hold a button on your original car's steering wheel.
  2. On the head unit screen, find the button icon corresponding to the function of the steering wheel button.
  3. Click the icon on the screen to change its color. Successful learning is indicated by the color change.

Alternative Method: Go to Settings > Car Information > SWC. First, click "Clear All", then click an icon on the screen. While it flashes, press the corresponding button on your steering wheel to match the icon. The color will change upon successful learning.

Note: If your order includes a CANBUS, please set the CANBUS type for the buttons to work. Contact customer service for assistance if needed.

4. Operating Instructions

4.1. User Interface

The LEHX L6 Pro features a professional and user-friendly UI interface designed to meet daily driving needs.

UI interface display

Examples of the LEHX L6 Pro user interface.

4.2. CarPlay & Android Auto

The unit supports both Apple CarPlay and Android Auto for seamless smartphone integration. This feature allows for a smarter, safer, and more enjoyable driving experience.

CarPlay and Android Auto interface

CarPlay and Android Auto display.

  • Wired Connection: Connect your smartphone using a USB data cable. The unit will automatically enter the CarPlay/Android Auto interface.
  • Wireless Connection: Turn on Bluetooth and Wi-Fi on your mobile phone, then connect to the unit's Bluetooth. The system will automatically enter the CarPlay/Android Auto interface. The signal is transmitted via Wi-Fi, so it functions even if Bluetooth is turned off. If Wi-Fi is turned off, CarPlay/Android Auto will disconnect.

Note: Android Auto functionality may vary by country and requires Google Play services to be available locally. Ensure you have the "Android Auto" app installed on your phone (Android 6.0 or higher required) and use a valid data cable.

4.3. GPS Navigation

The LEHX L6 PRO comes with pre-installed offline maps and supports permanent free updates. It supports various navigation applications like Waze, Navitel, Yandex, and IGO.

GPS Navigation display

Offline/Online GPS Navigation display.

4.4. Split Screen Function

Utilize the split-screen feature to run multiple applications simultaneously, such as navigation and music playback.

Split screen function

Split screen displaying navigation and other applications.

4.5. Bluetooth 5.1

The LEHX L6 Pro supports built-in smart Bluetooth 5.1, enabling mobile phone pairing, music streaming, and hands-free calling for safe driving.

Bluetooth 5.1 feature

Bluetooth 5.1 interface for music and calls.

4.6. 4G LTE & 5G WiFi

Stay connected with 4G LTE and 5G WiFi capabilities. The L6 Pro features a dual SIM socket, supporting both integrated and external SIM cards.

4G/5G WiFi and Dual SIM socket

Dual SIM socket and 4G/5G WiFi features.

4.7. Voice Control

Control various functions using voice commands for convenient and safe operation while driving.

Voice control features

Examples of voice commands for navigation, radio, and music.

4.8. Air Conditioning Control

The unit supports control and display of the original car's air conditioner, allowing you to manage climate settings directly from the head unit.

Air Conditioning control display

Air conditioning control interface.

4.9. DSP Audio

The LEHX L6 Pro features a 5.1 channel DSP (Digital Sound Processor) with DTS HiFi digital audio authorization. This technology provides surround sound, Trubass, and Phantom Center modes, allowing for precise adjustment of surround sound, reduced noise, and maximized sound conversion for a high-quality music experience.

DSP audio settings

DSP audio settings interface.

4.10. Rear View System

When the car is reversed, the head unit automatically switches to the backup camera image view with parking lines for safe parking.

Automatic reverse parking view

Rear view system display with parking lines.

4.11. Optional Accessories

Enhance your driving experience with these optional accessories:

  • ADAS DVR: Provides 1080P video recording and clear night image quality. It also offers reminders for front collision and lane departure.
  • ADAS DVR accessory

    ADAS DVR for driving assistance and recording.

  • TPMS (Tire Pressure Monitoring System): Real-time temperature and pressure visualization for all four tires. Alarms are activated if limits are exceeded.
  • TPMS accessory

    TPMS display and sensors.

  • DAB+ Tuner: Enjoy high-quality digital audio broadcasting channels via a USB receiver stick.
  • DAB+ Tuner accessory

    DAB+ Tuner connection via USB.

  • Headrest Display: Connect external headrest displays using a USB video adapter (purchased separately) to allow passengers to enjoy visual content.
  • Headrest display connection

    Connecting to headrest displays.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the screen and unit. Avoid using harsh chemicals or abrasive materials.
  • Software Updates: The device's functions may change with software updates. Check the manufacturer's website or contact customer service for information on available updates.
  • Adjustable Hardware Position: The hardware position on the back of the main equipment can be adjusted up and down to fit your specific model's situation.
  • Adjustable hardware position

    Adjustable hardware position on the back of the unit.

6. Troubleshooting

This section addresses common problems and their solutions.

6.1. Cannot Boot Normally

  1. Wiring Check: Ensure the yellow (B+), red (ACC), and black (GND) wires are correctly connected. Yellow to positive, red to key control, black to negative. Incorrect or insufficient connections will prevent booting.
  2. Original Car Wiring: If the original car's wiring colors are non-standard, connecting based on color alone may cause damage.
  3. Fuse Check: If the 3 wires are connected correctly but the unit doesn't boot, check the fuse on the yellow line. If the fuse is intact, twist the yellow and red wires together, turn on the key, and press the unit's power button.
  4. Repeated Fuse Blowing: If the fuse blows repeatedly, do not replace it again. This indicates a short circuit in the unit's protection circuit. The unit may require professional repair.
  5. Final Test: If problems persist, connect the yellow and red wires to a 12V battery or power supply (positive) and the black wire to negative. If it boots, the original car wiring is incorrect or problematic. If it doesn't boot, the unit is faulty.

6.2. Automatic Shut-Down

  1. Cable Connection Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, it may cause automatic shutdown. Follow correct wiring methods.
  2. Unstable Voltage: Test the power supply with a 12V-5A source. If the unit still shuts down automatically, the power supply or the unit itself is problematic.

6.3. Noise Issues

  1. Low Speaker Power: If the original speaker power is too low, noise may occur at high volumes. Avoid excessively high volumes.
  2. Grounded Speaker Cable: Ensure speaker cables are not grounded. Connect the iron speaker cable directly to the unit's speaker cable.

6.4. Remote Control Not Working

  1. Test Method: Use your phone camera to view the remote control's IR emitter. Press a button on the remote; if the IR light doesn't illuminate, replace the battery. If it illuminates, the remote is functional.

6.5. Settings Not Saved (No Memory)

  1. The yellow (B+) and red (ACC) lines are connected together (they should be separate).
  2. The yellow and red lines are reversed (swap their positions).

6.6. Bluetooth Not Working

Turn on the unit, search for its Bluetooth name on your mobile phone, and click "Connect." After connecting, you should be able to make calls and play music via Bluetooth.

6.7. Product Emits Smoke

Replace the FUSE. If the problem persists, the internal circuit is burned. After-sales service is required.

6.8. Sound Cannot Be Adjusted

  1. Reset the unit or unplug and replug the power cord.
  2. The volume knob is broken and needs replacement.

6.9. Reversing Camera Not Displaying

  1. Incorrect or Missing Wiring: Refer to section 3.4 for correct wiring.
  2. Broken Camera: If the camera's light doesn't illuminate when properly wired, the camera is broken and needs replacement.

6.10. USB Devices Cannot Be Played

Format the USB flash drive to FAT32. Re-download one or two songs and try again. If it still doesn't work, replace the USB flash drive.

6.11. FM Does Not Receive Radio Stations

  1. The antenna plug is not fully inserted, or the antenna line is disconnected.
  2. Search for stations by pressing the AS button for automatic search, or use the before/after buttons.
  3. If the above doesn't work, unplug the antenna plug and insert a screwdriver or metal strip in its place to test.

6.12. No Sound Immediately After Installation

The unit is tested before shipment. If there's no sound, it's usually a wiring error or a short-circuited original car speaker wire. Check the following:

  1. Check if the speaker cable is short-circuited and connected. Reconnect if necessary.
  2. Verify the number of speaker cables. If only 2 speaker cables are present, and the original car line doesn't match the unit, you may need to re-route the original car line. One speaker requires 2 wires; two speakers require 4 wires.

6.13. No Sound After A While

Disconnect all speaker cables from the unit (do not remove them). Find an external speaker and connect it to the gray and purple wires of the tail line. Test any green group. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.

7. Specifications

Feature Specification
Brand NameLEHX
ModelL6 PRO
Operating SystemAndroid 14
CPU7862 64BIT 8 Core
RAM4GB / 6GB
ROM32GB / 64GB / 128GB
Display Size9.7"
Resolution1024x768
Touch ScreenYes (9.7inch 2.5D screen, 4G version IPS)
DinDouble Din
Out Power50x4
Voltage12 V
Item Weight1.9kg
Max External Memory128G
Special FeaturesWifi function, Support steering wheel control, Support 4G Network, Built-in GPS, Charger, Mobile Phone, MP3 players
Digital Media FormatCD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG
OSD LanguageMulti-language support (including English, Spanish, French, Russian, German, Italian, etc.)
OriginMainland China
For Vehicle Brands/ModelFord Mondeo, Fusion (2013-2018)
CertificationCE
MaterialABS+
Mirror linkIphone & Android
SupportCarplay, Android Auto
BluetoothBluetooth 5.3
USB Ports3*USB ports
HIFI DSPBuilt-in HIFI DSP BU32107

8. Warranty and Support

The LEHX L6 PRO comes with a 1-year warranty.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact LEHX customer service. It is recommended that installation be performed by professionals to avoid damage to the car dashboard or the device itself.

You can also refer to the official user manual in PDF format for more detailed information: View User Manual (PDF)

Boot logo setting screen

Boot logo setting screen. Password for L6 Pro is 3368.

Professional installation recommendation

Recommendation for professional installation.

9. User Tips

  • Double-Check Compatibility: Always verify your car's specific model year, AC type (manual vs. automatic), and existing audio system (e.g., SONY) against the product's compatibility requirements before purchasing and installing. This can prevent issues with wiring harnesses and functionality.
  • Test Before Final Installation: Before fully installing the unit into the dashboard, connect the necessary wires and test basic functions like power, sound, and screen display. This helps identify any issues early.
  • CANBUS Connection: Pay close attention to whether your car model requires the CANBUS box to be connected or disconnected. Incorrect CANBUS setup can lead to power issues or improper functionality.
  • Steering Wheel Controls: If your steering wheel controls aren't working after installation, ensure the CANBUS type is correctly set in the unit's settings. If you don't have a CANBUS, follow the manual learning procedure carefully.

10. Frequently Asked Questions (FAQ)

Q: My radio doesn't turn on. What should I do?
A: Check the power wiring (Yellow B+, Red ACC, Black GND) for correct connections and ensure the fuse on the yellow line is not broken. Refer to section 6.1 for detailed troubleshooting.
Q: The reversing camera is not displaying an image.
A: Verify the camera's wiring as per section 3.4, especially the connection to the reverse detection line and the reverse light power supply. Ensure the camera itself is not faulty.
Q: My car has manual A/C, will this unit work?
A: No, this unit is not compatible with vehicles equipped with manual air conditioning systems. Please refer to section 2 for compatibility details.
Q: How do I update the boot logo?
A: Go to Configuration > Car Information > General > Boot Logo. Enter the password (3368 for L6 Pro) and select your desired logo.
Q: Can I use USB devices with this unit?
A: Yes, but ensure your USB flash drive is formatted to FAT32. If issues persist, try a different USB drive. Refer to section 6.10.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.