Iradio UV-2520

Contents

Iradio UV-2520 Analog Radio User Manual

Model: UV-2520

Introduction

This manual provides detailed instructions for the safe and efficient operation of your Irado UV-2520 full band dual TX/RX analog radio. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

Setup

1. Unpacking and Inspection

Carefully unpack all components and inspect them for any signs of damage. Ensure all items listed in the package contents are present.

2. Antenna Connection

Connect the appropriate antenna to the radio's antenna connector. The UV-2520 typically uses a TNC type connector. Ensure the connection is secure but do not overtighten.

TNC connector and magnetic mount antenna
Figure 1: TNC connector and magnetic mount antenna for the radio.

3. Power Connection

Connect the radio to a suitable 12V DC power source using the provided power cable. Ensure correct polarity to prevent damage to the unit.

4. Microphone Connection

Plug the microphone into its designated port on the radio unit.

Operating Instructions

1. Power On/Off

Press and hold the power button (usually a rotary knob on the front panel) to turn the radio on or off.

2. Display and Controls

The UV-2520 features a clear, large screen with dual display and dual standby capabilities, allowing you to monitor two frequencies simultaneously. Use the front panel controls and the microphone keypad for navigation and input.

Irado UV-2520 radio with microphone, showing dual display
Figure 2: The Irado UV-2520 radio highlighting its clear big screen, dual display, and dual standby features.

3. Frequency Selection

The radio supports a wide frequency range for both reception (RX) and transmission (TX):

  • RX: 64-108 MHz (FM Radio Band), 108-136 MHz (AM Aviation Band)
  • TX: 144-148MHz (VHF), 430-480MHz (UHF)

Use the frequency tuning knob or the microphone keypad to enter desired frequencies. The radio supports up to 999 channels.

Irado UV-2520 radio with microphone, showing RX/TX frequencies and record support
Figure 3: Irado UV-2520 radio displaying its record supported real-time playback feature and frequency ranges.

4. Transmission (TX)

To transmit, select your desired frequency and press the Push-To-Talk (PTT) button on the microphone. Ensure the channel is clear before transmitting.

Irado UV-2520 radio with microphone, emphasizing strong penetration
Figure 4: The Irado UV-2520 radio, designed for strong penetration and high power output.

5. Recording Function

The UV-2520 supports real-time recording and playback. Refer to the on-screen menu for specific instructions on how to activate and manage recordings.

Maintenance

1. Cleaning

Wipe the radio's exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the radio is powered off and disconnected from power before cleaning.

2. Heat Dissipation

The radio is designed with quick heat dissipation features, including a large diameter speaker and cooling fins. Ensure adequate ventilation around the unit during operation to prevent overheating.

Rear view of Irado UV-2520 radio showing speaker and heat dissipation fins
Figure 5: Rear view of the Irado UV-2520 radio, showing the large diameter speaker and quick heat dissipation design.

3. Water Resistance

The UV-2520 is rated IP57 for water and dust resistance. While it can withstand splashes and brief immersion, it is not designed for prolonged submersion. Always ensure all port covers are securely closed.

Troubleshooting

If you encounter issues with your Irado UV-2520 radio, please refer to the following common solutions:

  • No Power: Check all power connections. Ensure the power source is providing the correct voltage (12V DC).
  • No Signal/Poor Reception: Verify the antenna is correctly connected and undamaged. Ensure you are within range of other radios or repeaters. Check the selected frequency.
  • Cannot Transmit: Confirm the PTT button is functioning. Ensure the battery is sufficiently charged (if applicable) and the output power setting is appropriate.
  • Display Issues: Try restarting the radio. If the problem persists, contact customer support.

For more complex issues, it is recommended to consult a qualified technician.

Specifications

FeatureSpecification
Brand NameIradio
Model NumberUV-2520
Output Power(w)10w-25w
Battery Capacity(mAh)3200
Frequency Range136-174MHz 400-480MHz
Waterproof / Water-ResistantIP57
Walkie Talkie TypePortable
Is_DisplayYes
Maximum Range5km-10km
OriginMainland China
Multiple views of the Irado UV-2520 radio
Figure 6: Various views of the Irado UV-2520 radio, showcasing its design and features.

User Tips

  • Programming Software: For advanced customization and channel management, users may find it beneficial to obtain programming software and a compatible programming cable. These are typically available from the seller or specialized radio equipment suppliers.
  • Antenna Choice: The performance of your radio can be significantly affected by the antenna. Consider using a high-quality antenna suitable for your specific operating environment and frequency bands for optimal range and clarity.

Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller, Kingco Store, directly. Keep your purchase records for reference.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.