1. Introduction
This manual provides essential information for the proper use and care of your Airpods Pro 2nd Generation Lanyard. This accessory is designed to prevent loss of your earphones and other small digital devices with lanyard holes.
Key Features:
- Anti-pulling and anti-losing design.
- Made from high-quality TPU and nylon braided material.
- Smooth, elastic, and strong load-bearing capacity.
- Resistant to deformation and tangling.
- Washable for easy maintenance.
2. Setup Instructions
Follow these steps to attach the lanyard to your Airpods Pro 2nd Generation charging case or other compatible device:
- Locate the lanyard hole on your Airpods Pro 2nd Generation charging case.
- Take the thin loop end of the lanyard.
- Insert the thin loop through the lanyard hole.
- Once the loop is through, pass the main body of the lanyard (including the buckle) through the thin loop.
- Pull the lanyard tight to ensure it is securely fastened to your device.
3. Operating Instructions
The lanyard is designed for convenient and secure carrying of your devices. Once attached, you can wear it around your wrist or attach it to other items to prevent accidental drops or loss.
Applications:
- Airpods Pro 2nd Generation charging cases.
- Mobile phones with lanyard holes.
- Game consoles.
- Badges, certificates, access cards, transportation cards.
- Work permits, venue certificates.
- Suitable for use at concerts and receptions.
4. Care and Maintenance
To ensure the longevity and cleanliness of your lanyard, follow these maintenance guidelines:
- Cleaning: The lanyard is washable. You can hand wash it with mild soap and water. Rinse thoroughly and allow it to air dry completely before reattaching to any electronic devices.
- Storage: Store the lanyard in a clean, dry place when not in use.
- Inspection: Periodically inspect the lanyard for any signs of wear, fraying, or damage, especially around the buckle and attachment points. If significant wear is observed, consider replacing the lanyard to prevent device loss.
5. Troubleshooting
This product is a simple accessory and typically does not require complex troubleshooting. However, if you encounter any issues:
- Lanyard feels loose: Ensure the thin loop is fully pulled through and the main body is tightened securely.
- Difficulty attaching: Verify that your device has a compatible lanyard hole. The thin loop is designed to fit through small openings.
- Damage or wear: If the lanyard shows signs of damage, discontinue use to prevent accidental loss of your device.
6. Specifications
| Feature | Detail |
|---|---|
| Item Type | Charms / Lanyard |
| Model Number | Lanyard |
| Brand Name | MOONBIFFY |
| Origin | Mainland China |
| Rope Material | Polyester, TPU + Nylon braided |
| Rope Buckle Material | Plastic |
| Colors Available | Grey, Black |
| Length | Approximately 23 cm (9.06 inches) |
| Package | 1 x Lanyard |
| High-concerned chemical | None |
7. User Tips
- Always ensure the lanyard is securely attached before relying on it to prevent drops.
- While the lanyard is durable, avoid excessive force or sharp objects that could cut or damage the material.
- Check the compatibility of your device's lanyard hole before attempting to attach the strap.
8. Warranty and Support
For any questions, concerns, or support regarding your Airpods Pro 2nd Generation Lanyard, please contact the seller directly through the platform where you made your purchase. Please refer to your purchase documentation for specific warranty details, if applicable.