1. Product Overview
The UGREEN Bluetooth 5.4 Audio Adapter (Model 45812) is a versatile 2-in-1 device designed to provide wireless audio connectivity. It functions as both a Bluetooth transmitter (TX mode) and a Bluetooth receiver (RX mode), allowing you to connect various audio sources and output devices wirelessly via its 3.5mm AUX jack.

2. Package Contents
- UGREEN Bluetooth 5.4 Audio Adapter (Model 45812)
- USB-C Charging Cable
- User Manual
3. Setup and Charging
3.1 Charging the Device
Before initial use, fully charge the adapter. Connect the provided USB-C charging cable to the adapter's charging port and a standard USB power source (e.g., computer USB port, USB wall adapter). The charging time is approximately 2 hours.

3.2 Switching Between TX (Transmitter) and RX (Receiver) Modes
The adapter features a physical switch to toggle between Transmitter (TX) and Receiver (RX) modes. Ensure the device is powered off before switching modes to prevent unexpected behavior.
- TX Mode: Use this mode to send audio wirelessly from a non-Bluetooth device (e.g., TV, airplane entertainment system) to Bluetooth headphones or speakers.
- RX Mode: Use this mode to receive audio wirelessly from a Bluetooth-enabled device (e.g., smartphone, tablet) and output it to a non-Bluetooth audio system (e.g., car stereo, home amplifier).
4. Operating Instructions
4.1 TX (Transmitter) Mode Operation
- Switch the adapter to TX mode.
- Plug the 3.5mm AUX jack of the adapter into the audio output port of your audio source (e.g., airplane seat audio jack, TV headphone jack, computer audio out).
- Power on the adapter. It will automatically enter pairing mode (indicated by a flashing LED).
- Put your Bluetooth headphones or speaker into pairing mode.
- Once paired, the LED on the adapter will indicate a successful connection, and audio from your source will be transmitted wirelessly to your Bluetooth device.

TX Mode Use Cases:
- Airplane Entertainment: Connect to the airplane's audio jack to use your personal Bluetooth headphones.
- TV/Computer Audio: Transmit audio from your TV or computer to Bluetooth headphones for private listening or to a Bluetooth speaker for shared audio.
- Dual Pairing: The adapter supports dual pairing in TX mode, allowing two Bluetooth headphones/speakers to receive audio simultaneously from a single source. This is ideal for shared viewing experiences.


4.2 RX (Receiver) Mode Operation
- Switch the adapter to RX mode.
- Plug the 3.5mm AUX jack of the adapter into the audio input port of your non-Bluetooth audio system (e.g., car AUX input, home stereo amplifier, wired speaker).
- Power on the adapter. It will automatically enter pairing mode (indicated by a flashing LED).
- Enable Bluetooth on your mobile phone, tablet, or laptop and search for the UGREEN adapter in the list of available devices.
- Select the adapter to pair. Once paired, the LED will indicate a successful connection, and audio from your Bluetooth device will be played through your connected audio system.

RX Mode Use Cases:
- Car Audio: Transform your car's AUX input into a Bluetooth receiver for streaming music and hands-free calls from your smartphone.
- Home Stereo/Speakers: Connect to older audio systems or wired speakers to enable Bluetooth streaming from your mobile devices.
- Hands-Free Calling: In RX mode, the adapter's built-in microphone allows for hands-free calling when connected to a car stereo or home audio system.
- Dual Pairing: The adapter supports dual pairing in RX mode, allowing two mobile phones to connect simultaneously.


5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the adapter. Do not use liquid cleaners or aerosols.
- Storage: Store the device in a cool, dry place away from extreme temperatures and direct sunlight.
- Battery Care: To prolong battery life, avoid fully discharging the device frequently. Charge it regularly, even if not in use for extended periods.
- Handling: Avoid dropping the device or subjecting it to strong impacts.
6. Troubleshooting
6.1 Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery | Charge the device fully using the provided USB-C cable. |
| Cannot pair with a Bluetooth device | Incorrect mode, device not in pairing mode, or too far apart | Ensure the adapter is in the correct TX/RX mode. Put both devices into pairing mode. Keep devices within 1 meter during pairing. |
| No audio output/input | Incorrect cable connection, volume too low, or wrong audio source/output selected | Check 3.5mm AUX cable connection. Adjust volume on both devices. Ensure the correct audio source/output is selected on the connected device. |
| Short transmission range or intermittent connection | Obstructions, interference, or devices too far apart | Reduce distance between devices. Remove obstructions. Avoid strong electromagnetic interference. |
6.2 Resetting the Device
If you experience persistent issues, you can reset the adapter. Locate the 'RESET' button (often a small pinhole) on the device. Use a thin object (like a paperclip) to press and hold the reset button for a few seconds until the device restarts or the LED behavior changes. This will clear all previous pairing information.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | 45812 |
| Brand Name | UGREEN |
| Wireless Type | Bluetooth 5.4 |
| Interface | 3.5 MM Audio Jack |
| Max. RF Output Power | 4dBm (EIRP) |
| Transmission Distance | 10m/33ft |
| RX Codecs | SBC/AAC |
| TX Codecs | SBC |
| Frequency Response | 20Hz-20kHz |
| Output Level (Receiving) | ≤650mVrms RL=100kΩ |
| Input Level (Transmitting) | ≤0.75Vrms |
| Mic Sensitivity | -42±2dB (0dB=1V/Pa) |
| Audio Port | 3.5mm |
| Charging Port | USB-C |
| Battery Type | Polymer lithium-ion battery |
| Battery Capacity | 300mAh 3.7V |
| Limited Charging Voltage | 5.25V |
| Frequency Band | 2400MHz-2483.5MHz |
| Charging Time | About 2 hours |
| TX Operating Time | About 16 hours |
| RX Operating Time | About 18 hours |
| Certifications | FCC, RoHS, WEEE, CE |

8. User Tips
- AirPods Pro 2 Compatibility: The UGREEN Bluetooth 5.4 adapter is designed to be compatible with standard Bluetooth audio devices, including AirPods Pro 2, when operating in TX mode. Ensure your AirPods Pro 2 are in pairing mode to connect successfully.
- Xbox Series X Compatibility (TX Mode): If your Xbox Series X has a 3.5mm audio output jack, you can connect the UGREEN adapter in TX mode to transmit audio to a wireless Bluetooth speaker or headphones. This allows for wireless audio from your console.
- Dual Device Connection: Take advantage of the dual pairing feature in both TX and RX modes for shared listening or connecting multiple source devices.
- Optimal Performance: For the best audio quality and connection stability, keep the adapter and connected Bluetooth devices within the recommended transmission distance (up to 10m/33ft) and minimize physical obstructions.
9. Warranty and Support
UGREEN products are designed for reliability and performance. For any technical assistance, warranty claims, or product-related inquiries, please contact UGREEN customer support through their official channels. Please retain your proof of purchase for warranty service.