lemorele Wireless HDMI Transmitter Receiver

Contents

Lemorele Wireless HDMI Transmitter Receiver User Manual

Model: Wireless HDMI Transmitter Receiver

1. Introduction

The Lemorele Wireless HDMI Transmitter Receiver (Model G57) is a point-to-point wireless screen sharing device designed to enable seamless display mirroring or extension between various HDMI-enabled devices and large screens without requiring a Wi-Fi network. It is ideal for meeting presentations, home entertainment, educational settings, and other scenarios where high-resolution wireless video transmission is desired. This device offers high stability, low latency, easy plug-and-play operation, and a compact design.

Lemorele Wireless HDMI Transmitter and Receiver units

Figure 1: Lemorele Wireless HDMI Transmitter (TX) and Receiver (RX) units.

2. Product Overview

2.1 Components

Contents of the product box including TX, RX, cables, and manual

Figure 2: What's in the box - TX unit, RX unit, User Manual, HDMI extension cable, 2 USB-C power cables.

The standard package includes:

  • 1 x Transmitter (TX) unit
  • 1 x Receiver (RX) unit
  • 1 x User Manual
  • 1 x HDMI Extension Cable (19.6 inch)
  • 2 x USB-C Power Cables

2.2 Unit Features

Detailed view of TX and RX units with labeled components

Figure 3: Transmitter (TX) and Receiver (RX) unit features.

TX-Transmitter Features
No.Feature
1HDMI Input (connects to input signal source)
2Power Input (5V/2A)
3Power Indicator / Working Status Indicator
4Built-in Transmitter Antenna
5Pairing Button / Mode Button
6Resolution: 1080p60hz
RX-Receiver Features
No.Feature
1HDMI Output (connects to display device)
2Power Input (5V/2A)
3Power Indicator / Working Status Indicator
4Built-in Receiving Antenna
5Pairing Button / Mode Button
6Resolution: 1080p60hz
Product dimensions: 100mm length, 33mm width, 12mm height

Figure 4: Product dimensions.

3. Setup Instructions

The Lemorele Wireless HDMI Transmitter Receiver is designed for plug-and-play operation, requiring no additional software or complex configuration.

Connection diagram showing TX input from PC, Laptop, Camera, Set-top Box and RX output to TV Set, Monitor, Projector

Figure 5: Connection Diagram.

  1. Connect the Receiver (RX):
    Insert the HDMI port of the RX unit into an available HDMI input on your display device (e.g., TV, monitor, projector). Use one of the provided USB-C power cables to connect the RX unit to a 5V/2A power adapter (not included) or a powered USB port. Ensure the RX unit receives adequate power. Switch your display device's input source to the corresponding HDMI channel until the receiver's startup screen appears.
  2. Connect the Transmitter (TX):
    Insert the HDMI port of the TX unit into the HDMI output port of your source device (e.g., computer, laptop, camera, set-top box, game console). The TX unit will power on automatically. The indicator light on the TX unit will begin to blink rapidly. After a few seconds, the video from your source device will automatically be synchronized and displayed on the screen connected to the RX unit.
  3. Screen Sharing Complete:
    Once connected, the device will automatically adjust to the optimal resolution for a smooth viewing experience.
Laptop connected to TX unit, wirelessly displaying to a projector

Figure 6: Plug and Play setup example.

4. Operating Instructions

4.1 Pairing (Factory Paired)

The TX and RX units are factory-paired, so manual pairing is generally not required during normal use. However, if pairing is lost or you are adding new TX units, follow these steps:

  1. Prepare Receiver (RX) for Pairing:
    Connect the RX unit to your display device's HDMI port and power supply. Press and hold the Mode button on the RX unit for 5 seconds. Release the button when the pairing countdown appears on the screen.
  2. Prepare Transmitter (TX) for Pairing:
    Connect the TX unit to your source device and power supply. Press and hold the Mode button on the TX unit for 5 seconds. Release the button when its indicator light begins to blink rapidly.
  3. Pairing Complete:
    The units will automatically pair, and screen sharing will commence.
  4. Adding Multiple Transmitters:
    If you have purchased additional TX units separately, each new TX unit must be paired individually by following steps 1-3.

4.2 Multi-Person Collaboration

The system supports connecting up to 8 Transmitter (TX) units to a single Receiver (RX) unit. This feature is highly beneficial for meeting rooms or collaborative environments, allowing multiple users to share their screens without needing to constantly swap cables or devices.

Diagram showing one RX unit connected to a display, receiving signals from up to eight TX units

Figure 7: One receiver can be paired with up to eight transmitters.

4.3 Private Mode (Disconnect/Reconnect)

To temporarily stop or resume screen sharing, lightly press the Mode button on the Transmitter (TX) unit. This action will disconnect or reconnect the transmission, allowing for privacy or a quick pause in sharing.

4.4 Display Modes

The device supports both Mirror Mode and Extend Mode, depending on your operating system's display settings. You can configure these settings on your source device (e.g., laptop) to either duplicate your screen or extend your desktop onto the connected display.

Comparison of Mirror Mode and Extend Mode for display output

Figure 8: Mirror Mode vs. Extend Mode.

5. Specifications

FeatureSpecification
Resolution1080P@60Hz (Full HD)
Wi-Fi Frequency Band2.4G / 5GHz dual-frequency (RealtekBUWiFi module)
Power Supply5V/2A (via USB-C)
Transmission DistanceUp to 50 meters (164 feet) in empty space
Casing MaterialABS Plastic
Operating Temperature0-50 degrees Celsius
Supported Resolutions1152x864, 1200x900, 1280x800, 1280x1024, 1024x768, 800x600, 1280x720, 1920x1080
CertificationsCE, RoHS, FCC
Diagram illustrating 2.4G/5G WiFi transmission for stable and fast video

Figure 9: Dual-frequency 2.4G/5G WiFi transmission for enhanced stability.

Diagram showing a laptop wirelessly transmitting to a large display over 50 meters / 164 feet

Figure 10: Transmission distance up to 50 meters (164 feet).

Comparison of 1080P@60Hz clear display versus blurry 720P display

Figure 11: High-definition 1080P@60Hz display quality.

6. Maintenance

To ensure the longevity and optimal performance of your Lemorele Wireless HDMI Transmitter Receiver, follow these general maintenance guidelines:

  • Keep the devices clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the units to extreme temperatures, direct sunlight, or high humidity.
  • Do not attempt to disassemble or modify the devices, as this will void the warranty and could cause damage.
  • Store the units in a cool, dry place when not in use.

7. Troubleshooting

Q: Why is screen sharing not working correctly?
A: Check if both the Transmitter (TX) and Receiver (RX) units are correctly connected and receiving power. Ensure that the display device's signal source is set to the corresponding HDMI input port where the RX unit is connected.
Q: What should I do if there is latency or lag during screen sharing?
A: Ensure there are no physical obstructions between the TX and RX units. Place them as close to each other as possible. Additionally, try to minimize wireless interference in the surrounding environment (e.g., from other Wi-Fi devices, microwaves).
Q: How do I restore factory settings?
A: If the product experiences an error, you can restore factory settings by pressing and holding the Mode button on the Receiver (RX) unit for 15 seconds. The device will restart after a black screen, and factory settings will be restored.

8. User Tips

  • Expand Your Setup: If you already own a Lemorele Wireless HDMI Receiver (RX) and wish to connect more source devices, you can purchase additional Transmitter (TX) units separately. Remember that each new TX unit must be paired with your existing RX unit following the pairing instructions.
  • Optimal Placement: For the best performance and minimal latency, position the TX and RX units in a direct line of sight with as few obstacles as possible.
  • Power Source: Always use a stable 5V/2A power source for both the TX and RX units to ensure reliable operation.

9. Safety Precautions

Please read and follow these safety precautions to prevent damage to the device and ensure safe operation:

  • Avoid using this product in environments with high temperatures or high humidity.
  • Prevent water, liquids, or other substances from entering the product, as this can cause short circuits or damage the device.
  • During use, do not pull or connect HDMI or power cables with excessive force, as this can damage the ports or cables.
  • Keep the device away from strong magnetic fields.
  • Do not expose the device to open flames.

10. Warranty and Support

The Lemorele Wireless HDMI Transmitter Receiver comes with a 1-year warranty.

For technical assistance or any issues encountered during use, please contact technical support at support@lemorele.com.

You can also refer to the official user manual in PDF format for more detailed information: View User Manual (PDF)

10.1 Product Video Guide

Watch this video for a visual guide on setting up and using your Lemorele Wireless HDMI Transmitter Receiver:

Video: Lemorele Wireless HDMI Transmitter Receiver Product Demonstration.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.