UGREEN 45812

Contents

UGREEN 2-in-1 Bluetooth 5.4 Adapter User Manual

Model: 45812

Introduction

The UGREEN 45812 is a versatile 2-in-1 Bluetooth 5.4 adapter designed to seamlessly transmit and receive audio wirelessly. It features both Transmitter (TX) and Receiver (RX) modes, allowing you to connect non-Bluetooth devices to Bluetooth-enabled audio equipment, or vice-versa. With its compact design, 3.5mm AUX jack, and long battery life, it's an ideal companion for airplanes, cars, home entertainment systems, and more.

UGREEN Bluetooth 5.4 Adapter, front view with 3.5mm jack

Figure 1: UGREEN 2-in-1 Bluetooth 5.4 Adapter

Package Contents

  • UGREEN 2-in-1 Bluetooth 5.4 Adapter (Model: 45812)
  • USB-C Charging Cable
  • User Manual

Setup

Charging the Device

Before first use, fully charge the adapter. Connect the provided USB-C charging cable to the adapter's USB-C port and a standard USB power source (e.g., wall adapter, computer USB port). The charging indicator light will show the charging status. A full charge takes approximately 2 hours.

UGREEN Bluetooth Adapter charging via USB-C, showing 18 hours battery life

Figure 2: Charging the Adapter and Battery Life

Mode Selection (TX/RX)

The adapter features a switch to select between Transmitter (TX) and Receiver (RX) modes. Ensure the switch is set to the desired mode before connecting or pairing.

  • TX (Transmitter) Mode: Used to send audio from a non-Bluetooth device (e.g., TV, airplane entertainment system, computer) to Bluetooth headphones or speakers.
  • RX (Receiver) Mode: Used to receive audio from a Bluetooth-enabled device (e.g., smartphone, tablet, laptop) and play it through a non-Bluetooth audio system (e.g., car stereo, home amplifier, wired speaker).

Operating Instructions

Transmitter (TX) Mode Operation

  1. Set to TX Mode: Slide the switch on the adapter to the 'TX' position.
  2. Connect to Audio Source: Plug the 3.5mm AUX jack of the adapter into the audio output port of your non-Bluetooth device (e.g., TV, airplane seat audio jack, computer headphone jack).
  3. Pair with Bluetooth Device: Turn on your Bluetooth headphones or speaker and put them into pairing mode. The adapter will automatically search for and connect to nearby Bluetooth audio devices. The indicator light will confirm connection.
  4. Enjoy Audio: Once connected, audio from your source device will be transmitted to your Bluetooth headphones/speaker.
Diagram showing TX mode connections: Airplane, TV, Computer to Earphones, Headphones, Bluetooth Speaker.

Figure 3: Transmitter (TX) Mode Connection Diagram

Person using the adapter on an airplane with wireless headphones

Figure 4: TX Mode for Airplane Entertainment

Receiver (RX) Mode Operation

  1. Set to RX Mode: Slide the switch on the adapter to the 'RX' position.
  2. Connect to Audio System: Plug the 3.5mm AUX jack of the adapter into the audio input port of your non-Bluetooth audio system (e.g., car AUX input, home stereo amplifier, wired speaker).
  3. Pair with Bluetooth Device: Enable Bluetooth on your smartphone, tablet, or laptop and search for 'UGREEN 45812' (or similar name). Select it to pair. The indicator light will confirm connection.
  4. Play Audio: Once connected, you can play audio from your Bluetooth device through your connected audio system.
Diagram showing RX mode connections: Mobile Phone, Tablet, Laptop to Car, Amplifier, Speaker.

Figure 5: Receiver (RX) Mode Connection Diagram

Adapter in a car's AUX port, connected to a phone for hands-free calling and music

Figure 6: RX Mode for Car Audio and Hands-Free Calling

Dual Pairing

The adapter supports dual pairing in both TX and RX modes, allowing two Bluetooth devices to be connected simultaneously.

  • TX Mode: Connect two pairs of Bluetooth headphones to a single audio source (e.g., TV) for shared listening.
  • RX Mode: Connect two smartphones to a car stereo or home speaker, allowing seamless switching between audio sources.
Two people watching TV with wireless headphones, illustrating dual pairing in TX mode

Figure 7: Dual Pairing in TX Mode for Shared Viewing

Maintenance

  • Keep the device dry. Moisture can damage the internal circuitry.
  • Do not expose the device to extreme temperatures.
  • Clean the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Store the device in a cool, dry place when not in use.
  • Avoid dropping or subjecting the device to strong impacts.

Troubleshooting

  • Device won't turn on: Ensure the device is fully charged. Connect it to a power source using the USB-C cable.
  • Cannot pair with a Bluetooth device:
    • Ensure the adapter is in the correct TX or RX mode.
    • Make sure your Bluetooth headphones/speaker/phone is in pairing mode.
    • Move the adapter closer to the Bluetooth device.
    • Clear previous pairing records on both devices and try again.
    • Restart both the adapter and the Bluetooth device.
  • No audio or poor audio quality:
    • Check if the 3.5mm AUX cable is securely connected to both the adapter and the audio source/system.
    • Adjust the volume on both the adapter and the connected audio device/system.
    • Ensure there are no obstructions between the adapter and the Bluetooth device.
    • Verify that the correct audio input/output is selected on your source/receiving device.
  • Intermittent connection:
    • Ensure the transmission distance is within 10m/33ft and there are no major obstacles.
    • Avoid interference from other wireless devices (Wi-Fi routers, microwaves).
  • Hands-free calling not working in RX mode:
    • Ensure your phone's Bluetooth settings allow for call audio to be routed through the adapter.
    • Check the microphone sensitivity settings on your phone if applicable.

Specifications

FeatureSpecification
BrandUGREEN
Model Number45812
Wireless TypeBluetooth
Bluetooth StandardCompatible Bluetooth v5.4
Interface3.5 MM AUX Jack
ContentAUDIO
Frequency Band2400MHz-2483.5MHz
Max. RF Output Power4dBm (EIRP)
Transmission Distance10m/33ft
RX CodecsSBC/AAC
TX CodecsSBC
Frequency Response20Hz-20kHz
Output Level (Receiving)≤650mVrms RL=100kΩ
Input Level (Transmitting)≤0.75Vrms
Mic Sensitivity-42±2dB (0dB=1V/Pa)
Audio Port3.5mm
Charging PortUSB-C
Battery TypePolymer lithium-ion battery
Battery Capacity300mAh 3.7V
Limited Charging Voltage5.25V
Charging TimeAbout 2 hours
TX Operating TimeAbout 16 hours
RX Operating TimeAbout 18 hours
OriginMainland China
CertificationCE, FCC, RoHS, WEEE
Diagram highlighting Upgraded Bluetooth 5.4 features: Faster, Stable, Low Latency.

Figure 8: Upgraded Bluetooth 5.4 Features

User Tips

  • For optimal audio quality, ensure the adapter is fully charged before extended use.
  • When using in TX mode with a TV, check your TV's audio output settings to ensure audio is routed to the 3.5mm jack.
  • In RX mode, if connecting to a car stereo, ensure the car's audio input is set to AUX.
  • To maximize battery life, turn off the adapter when not in use.
  • If experiencing pairing issues, try resetting the adapter by pressing the 'RESET' button (if available) or holding the main button for an extended period as per the quick start guide.

Warranty and Support

UGREEN products are designed and manufactured to the highest quality standards. For warranty information, technical support, or customer service, please refer to the official UGREEN website or contact your retailer. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.