1. Introduction
The TBS5230 is an external TV tuner card featuring a USB2.0 interface, designed to receive digital TV channels across multiple global standards. This versatile device supports DVB-T2/C2/T/C (J.83A/B/C), ISDB-T/C, and ATSC1.0. Its USB connectivity allows for easy integration with your desktop or laptop PC. Once connected with the appropriate signal cable and software installed, the TBS5230 provides the convenience of switching between various TV standards, enabling you to access a broader range of television channels than a single-standard tuner.
Main Features
- Multi-standard TV USB box
- Supports DVB-T2/C2/T/C (J.83A/B/C), ISDB-T/C, ATSC1.0 for SD or HD TV receiving
- High-definition video, real-time and scheduled video recording capabilities
- High sensitivity DVB-T2 tuner for optimal digital TV reception
- Windows BDA driver and Linux Driver ready
2. Package Contents
Please check the box for the following items:
- 1 x TBS5230 TV Tuner USB Box
- 1 x USB cable
- 1 x F-IEC adapter

3. Setup Guide
3.1 Hardware Connection
- Connect Antenna: Connect your digital TV antenna or cable signal to the 'IN' port on the TBS5230.
- Connect to PC: Plug the USB cable into the 'USB2.0' port on the TBS5230 and then into an available USB port on your desktop or laptop PC.


3.2 Driver and Software Installation
- Driver Installation: Install the appropriate Windows BDA driver or Linux driver for the TBS5230 on your computer. Drivers are typically available on the manufacturer's website or included with the product.
- TV Viewing Software: Install compatible TV viewing software (e.g., ProgDVB, DVBViewer, Kodi with TVHeadend, etc.) on your PC. This software will allow you to scan for channels, watch live TV, and record programs.
Note: For detailed driver and software installation instructions, please refer to the official user manual PDF linked in the 'Warranty & Support' section.
4. Operation
4.1 Initial Setup and Channel Scan
- Launch Software: Open your installed TV viewing software.
- Select Tuner: In the software's settings or device manager, select the TBS5230 as your TV tuner device.
- Configure TV Standard: Choose the correct TV standard for your region (e.g., DVB-T2, DVB-C, ATSC1.0). Some software may have a 'Setting Mode Tool' for this.
- Perform Channel Scan: Initiate a channel scan within the software. This will detect and list all available digital TV channels.
- Watch TV: Once the scan is complete, you can select a channel from the list to begin watching live television.


4.2 Recording TV Programs
Most TV viewing software allows for recording. Consult your software's documentation for specific instructions on:
- Real-time recording of the currently watched program.
- Scheduling future recordings based on program guides.
- Setting recording quality and storage location.
4.3 Status Indicators

- POWER LED: Indicates the device is powered on.
- LOCK LED: Indicates a successful signal lock. If this LED is off, it means no signal is being received or locked.
5. Specifications
5.1 General Specifications
| Feature | Description |
|---|---|
| Model | TBS5230 |
| Tuner | 1 |
| Interface | USB2.0 |
| Temperature | 0 ~ 60°C |
| System Requirements | Windows XP / Vista / 7 / 8 / 10, Linux |
| Digital TV signal | DVB-T2/C2/T/C (J.83A/B/C), ISDB-T/C, ATSC1.0 |
| TV tuner card size | 9 * 7.5 * 2.5 (cm) |
| Net weight | 120g |
| Gift Box Size | 17 * 16.5 * 8.5 (cm) |
| Weight (with packaging) | 350g |

5.2 Supported TV Standards Details
| Standard | Parameters |
|---|---|
| DVB-T2 and T2-Lite | Receiving channel: VHF band, UHF band |
| Bandwidth: 1.7, 5, 6, 7, 8MHz | |
| FFT mode: 1K, 2K, 4K, 8K, 16K, 32K | |
| Guard intervals: 1/32, 1/16, 1/8, 1/4, 1/128, 19/128 and 19/256 | |
| Modulations: 16, 32, 64, 128 and 256QAM | |
| Code rate: 1/2, 3/5, 2/3, 3/4, 4/5 and 5/6 | |
| DVB-T | Channel bandwidths: 6, 7 and 8MHz |
| FFT: 2 and 8K | |
| Modulations: QPSK, 16 and 64QAM | |
| Code rates: 1/2, 2/3, 3/4, 5/6 and 7/8 | |
| DVB-C2 | Channel bandwidths: 6 and 8MHz |
| Guard intervals: 1/64 and 1/128 | |
| Modulations: 16, 64, 256, 1024, 4096 QAM | |
| Code rates: 2/3, 3/4, 4/5, 5/6, 8/9 and 9/10 | |
| DVB-C | Symbol rate: 1.7 to 7.2 Msym/s |
| Modulations: 16, 32, 64, 128 and 256QAM | |
| Roll-off factor: 0.15 | |
| ISDB-T | Bandwidth: 6, 7 and 8MHz |
| FFT: 2, 4 and 8K | |
| Guard intervals: 1/32, 1/16, 1/8 and 1/4 | |
| Modulations: QPSK, 16QAM and 64QAM | |
| ISDB-C | Symbol rate: 5.274 Msym/s |
| Roll-off factor: 0.13 | |
| Modulations: 64 and 256QAM | |
| Frame type: TSMF (Transport Streams Multiplexing Frame) | |
| J.83B (ITU-T J.83 v3.0 Annex B) | Symbol rate: 5.056941, 5.360537, 5.6 Msym/s |
| Roll-off factor: 0.18 and 0.12 | |
| Modulations: 64 and 256QAM | |
| ATSC1.0 | Channel bandwidths: 6MHz |
| Modulation: 8VSB | |
| Code rate: 2/3 |

6. User Tips
- Power Supply: The included 'dual-head' USB 2.0 cable (2xA - 1xB) might be necessary for sufficient power when connected to USB 2.0 ports, especially if experiencing instability. For USB 3.0 ports, a standard USB cable might suffice.
- Windows 11 Compatibility: If using Windows 11, ensure you have the latest drivers that are compatible with 'Kernel Isolation' mode to avoid conflicts.
- Switching Modes: To receive cable channels (e.g., DVB-C), you may need to manually switch the tuner's mode from its default setting using a 'Setting Mode Tool' or similar option within your TV viewing software.
7. Troubleshooting
7.1 No Signal or Channels Found
- Check Antenna/Cable Connection: Ensure your antenna or cable is securely connected to the 'IN' port of the TBS5230.
- Verify Drivers: Confirm that the correct drivers for the TBS5230 are properly installed on your computer.
- Perform Channel Scan: Always perform a fresh channel scan in your TV viewing software after initial setup or if channels are missing.
- Select Correct Standard: Ensure the correct TV standard (DVB-T2, DVB-C, ATSC1.0, etc.) is selected in your TV viewing software settings.
- Check Signal Strength: If possible, check the signal strength and quality within your TV viewing software. Adjust antenna position if necessary.
- LOCK LED: If the 'LOCK' LED on the device is off, it indicates no signal lock. Review the above steps.
7.2 Device Not Recognized or No Power
- USB Connection: Ensure the USB cable is firmly connected to both the TBS5230 and your computer. Try a different USB port.
- Power Supply: If using a USB 2.0 port, try using the included dual-head USB cable to ensure sufficient power delivery.
- POWER LED: Check if the 'POWER' LED on the device is illuminated. If not, there might be a power issue.
- Driver Reinstallation: Reinstall the device drivers to resolve potential recognition issues.
7.3 Software Freezing or Crashing
- Update Software: Ensure your TV viewing software is updated to the latest version.
- Update Drivers: Make sure your TBS5230 drivers are up-to-date.
- System Resources: Close other demanding applications to free up system resources.
- Reinstall Software: If issues persist, try reinstalling the TV viewing software.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the device. Avoid using liquid cleaners or solvents.
- Ventilation: Ensure the ventilation holes on the device are not blocked to prevent overheating.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Cable Care: Handle USB and antenna cables carefully to prevent damage.
9. Warranty & Support
9.1 Warranty Information
The TBS5230 comes with a 12-month Manufacturer's Limited Warranty for defective items, starting from the date of receipt. This warranty does not cover items damaged due to misuse or accidental damage after receipt. Accessories included with the product typically carry a 3-month warranty.
9.2 Further Support
For more detailed instructions, driver downloads, software updates, and technical assistance, please refer to the official user manual PDF:
Download Official User Manual (PDF)
You can also visit the manufacturer's official website or contact their support team:
- Website: www.tbsiptv.com
- Email Support: support@tbsdtv.com