MicroData ST-6653Plus

Contents

MicroData ST-6653Plus Car Vacuum Cleaner and Blower Instruction Manual

Model: ST-6653Plus

1. Product Overview

The MicroData ST-6653Plus is a versatile, rechargeable, handheld device designed for both vacuuming and blowing tasks. It features a powerful brushless motor, three-speed adjustment, and a compact design suitable for car and home use.

MicroData ST-6653Plus Multifunction Cordless Vacuum Cleaner and Blower with Accessories
The ST-6653Plus multifunction cordless vacuum cleaner and blower, showcasing its main unit and various attachments. Key features include 3-speed adjustment, long-lasting 6000mAh battery, and seven accessories.

Package Contents

Please check the package for the following items:

Packing list for MicroData ST-6653Plus showing numbered components
Detailed view of the ST-6653Plus packing list, with each component numbered for easy identification.
  1. Main Unit (Vacuum/Blower)
  2. Dust Cup
  3. Filter
  4. Flat Nozzle/Brush Attachment
  5. Narrow Nozzle
  6. Brush Nozzle
  7. Long Brush Nozzle
  8. Short Brush Nozzle
  9. Type-C Charging Cable
  10. Cone Nozzle (for blowing/inflating)
  11. Small Cone Nozzle (for blowing/inflating)
  12. Wide Nozzle (for blowing/inflating)

2. Setup

Charging the Device

  1. Connect the provided Type-C charging cable to the charging port on the main unit.
  2. Plug the other end of the cable into a 5V/1.5A USB power adapter (not included).
  3. The charging indicator light will show the charging status. A full charge typically takes 3-3.5 hours.

Attaching Accessories

To attach an accessory, align it with the suction or blowing port and push firmly until it clicks into place. Ensure a secure fit for optimal performance.

3. Operating Instructions

Power On/Off and Speed Adjustment

The device features three speed modes for varying cleaning and blowing needs:

Diagram showing 3-speed modes and their specifications
Performance specifications for each of the three speed modes, including suction power, rated power, and continuous working time.
  • Low Speed (Mode 1): Suction: <7000Pa, Power: <40W, Runtime: <35min. Indicated by an Orange light.
  • Medium Speed (Mode 2): Suction: <13000Pa, Power: <80W, Runtime: <25min. Indicated by a Red light.
  • High Speed (Mode 3): Suction: <16000Pa, Power: <100W, Runtime: <15min. Indicated by a Green light.

Press the power button to cycle through the speed modes. Press and hold to turn off the device.

Multifunctional Use

The ST-6653Plus can be used for a variety of tasks:

Four examples of the vacuum cleaner's suction and blowing functions
Illustrations of the 4-in-1 functionality: vacuuming car mats, blowing keyboard dust, inflating swimming rings, and vacuum sealing storage bags.
  • Vacuuming: Use the appropriate nozzle (e.g., flat nozzle for car mats, narrow nozzle for crevices) to clean dust, crumbs, and debris from various surfaces.
  • Blowing: Attach a cone nozzle to the exhaust port to blow away dust from keyboards, camera lenses, or to inflate small items like swimming rings and toy balloons.
  • Inflating: Use the cone nozzles to inflate small inflatables.
  • Vacuum Sealing: The device can assist in evacuating air from storage bags.
Grid of nine images demonstrating various uses of the multifunction device
Examples of multifunctional use, including cleaning sofa crumbs, window and car crevices, vacuum sealing, blowing dust from keyboards and cameras, and inflating air mattresses and swimming rings.

4. Maintenance

Emptying the Dust Cup

Regularly empty the dust cup to maintain optimal suction power. To empty:

  1. Twist and detach the dust cup from the main unit.
  2. Remove the filter.
  3. Empty the collected debris into a waste bin.

Cleaning the Filter

The filter should be cleaned periodically to prevent clogging and ensure efficient operation.

  1. After removing the filter from the dust cup, gently tap it to dislodge dust.
  2. If necessary, rinse the filter with water. Ensure it is completely dry before reinserting it into the dust cup and reattaching to the main unit.

General Cleaning

Wipe the exterior of the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.

5. Troubleshooting

  • Device not turning on: Ensure the device is fully charged. If not, connect it to the charger and allow 3-3.5 hours for a full charge.
  • Low suction/blowing power: Check if the dust cup is full and empty it. Inspect the filter for clogs and clean it if necessary. Ensure all attachments are securely fitted.
  • Short operating time: The battery may not be fully charged, or the device is being used on a higher speed mode, which consumes more power. Charge fully and consider using a lower speed mode for longer runtime.
  • Unusual noise: Turn off the device immediately. Check for any obstructions in the suction or blowing paths, or within the dust cup and filter assembly.

6. Specifications

FeatureSpecification
Model NameST-6653Plus
Brand NameMicroData
Item TypeVacuum Cleaner / Blower
Special FeaturesBlowing and suction machine
MaterialABS
OriginMainland China
CertificationCE
Item Weight0.48 kg
Product Dimensions (L x W x H)20 cm x 20 cm x 6.5 cm
Dust Cup Capacity0.4 L
Charging MethodType-C
Charging Voltage/Current5V/1.5A
Charging Time3-3.5 hours
Rated Voltage11.1V
Rated Power100W
Battery Capacity3 x 2000mAh (6000mAh total)
Motor Speed80000 RPM
Vacuum Degree (Max)16000Pa
Continuous Working Time (Low/Medium/High)35 min / 25 min / 15 min
Electricity Light DisplayGreen (High), Red (Medium), Orange (Low)

7. User Tips

  • For optimal performance, ensure the dust cup is emptied and the filter is clean before each use.
  • Utilize the various nozzles for specific tasks: the flat nozzle for wider surfaces, narrow nozzle for tight spaces, and brush nozzles for delicate cleaning or dislodging stubborn dirt.
  • When using the blowing function, select the appropriate cone nozzle for the item you are inflating or the area you are dusting.
  • To extend battery life, consider using lower speed settings for less demanding tasks.

8. Warranty and Support

For warranty information and customer support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.